Přístupnostní navigace
E-přihláška
Vyhledávání Vyhledat Zavřít
prof. RNDr.
CSc.
FSI, ÚFI OMMTA – profesor
+420 54114 2827pokluda@fme.vutbr.cz
Odeslat VUT zprávu
2024
ŠANDERA, P.; ŽÁK, S.; HORNÍKOVÁ, J.; POKLUDA, J. Formulas for the critical length of mode II and III cracks emanating from circumferential U–notches. ENGINEERING FRACTURE MECHANICS, 2024, vol. 298, no. 1, p. 109955-1 (109955-15 p.)ISSN: 0013-7944.Detail
SLÁMEČKA, K.; SKALKA, P.; POKLUDA, J. Modeling Mechanical Properties of Titanium Scaffolds with Variable Microporosity. Advanced engineering materials, 2024, vol. 26, no. 19, p. 1-8. ISSN: 1527-2648.Detail
KUBÍČEK, R.; VOJTEK, T.; JAMBOR, M.; POKORNÝ, P.; NÁHLÍK, L.; POKLUDA, J.; HUTAŘ, P. Solution to the problem of low sensitivity of crack closure models to material properties. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2024, vol. 130, no. 104243, 12 p. ISSN: 1872-7638.Detail
2023
SLÁMEČKA, K.; KASHIMBETOVA, A.; POKLUDA, J.; ZIKMUND, T.; KAISER, J.; MONTUFAR JIMENEZ, E.; ČELKO, L. Fatigue behaviour of titanium scaffolds with hierarchical porosity produced by material extrusion additive manufacturing. MATERIALS & DESIGN, 2023, vol. 225, no. 1, p. 1-11. ISSN: 0264-1275.Detail
KIANICOVÁ, M.; DLOUHÝ, I.; ŠANDERA, P.; HORNÍKOVÁ, J.; POKLUDA, J. Dynamic Fracture Characteristics of High-Strength Steel. Defect and Diffusion Forum, 2023, vol. 422, no. 1, p. 45-49. ISSN: 1012-0386.Detail
SLÁMEČKA, K.; KASHIMBETOVA, A.; TKACHENKO, S.; GEJDOŠ, P.; POKLUDA, J.; MONTUFAR JIMENEZ, E.; ČELKO, L. Fatigue performance of hierarchically porous titanium scaffolds produced by additive manufacturing and its possible improvement by gas nitriding. In Journal of Physics: Conference Series. Journal of Physics: Conference Series. BRISTOL: IOP PUBLISHING LTD, 2023. no. 1, 7 p. ISSN: 1742-6588.Detail
2021
POKLUDA, J.; DLOUHÝ, I.; KIANICOVÁ, M.; ČUPERA, J.; HORNÍKOVÁ, J.; ŠANDERA, P. Temperature Dependence of Fracture Characteristics ofVariously Heat-Treated Grades of Ultra-High-Strength Steel:Experimental and Modelling. Materials, 2021, vol. 14, no. 19, p. 1-28. ISSN: 1996-1944.Detail
2020
KOTOUL, M.; SKALKA, P.; PROFANT, T.; ŘEHÁK, P.; ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. A novel multiscale approach to brittle fracture of nano/micro-sized components. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2020, vol. 43, no. 8, p. 1630-1645. ISSN: 8756-758X.Detail
ŠESTÁK, P.; ČERNÝ, M.; ZHANG, Z.; POKLUDA, J. Extraordinary Response of H-Charged and H-Free Coherent Grain Boundaries in Nickel to Multiaxial Loading. Crystals, 2020, vol. 10, no. 7, p. 1-12. ISSN: 2073-4352.Detail
ČERNÝ, M.; POKLUDA, J. On the effect of supercell size and strain localization in computational tensile tests. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2020, vol. 28, no. 6, p. 065011-1 (065011-10 p.)ISSN: 0965-0393.Detail
ŠANDERA, P.; HORNÍKOVÁ, J.; KIANICOVÁ, M.; DLOUHÝ, I.; POKLUDA, J. Determination of Ramberg-Osgood approximation for estimation of low- temperature fracture toughness. In Fracture and Damage Mechanics. AIP conference proceedings. AIP Publishing LLC., 2020. no. 1, p. 020024-1 (020024-6 p.)ISBN: 978-0-7354-4045-6. ISSN: 1551-7616.Detail
KIANICOVÁ, M.; ŠANDERA, P.; HORNÍKOVÁ, J.; KOTTFER, D.; POKLUDA, J. The Effect of Prior Surface Roughness on Fatigue Life of Nitrided Specimens. In Metallography XVII. Defect and Diffusion Forum. Švýcarsko: TransTech Publication, 2020. no. 1, p. 271-276. ISBN: 978-3-0357-1612-2. ISSN: 1662-9507.Detail
2019
HORNÍKOVÁ, J.; ŠANDERA, P.; ŽÁK, S.; POKLUDA, J. Study on Generalization of Lefort’s Approach toCriticalCrackLength. In Advances in Fracture and Damage Mechanics XVIII. Key Engineering Materials (print). Trans Tech Publications Ltd, 2019. no. 1, p. 153-158. ISBN: 9783035715866. ISSN: 1013-9826.Detail
VOJTEK, T.; ŽÁK, S.; POKLUDA, J. Towards Quantitative Explanation of Effective Thresholds of Mode III Fatigue Crack Propagation in Metals. In Mechanical Fatigue of Metals. Structural Integrity. Cham: Springer, 2019. p. 161-167. ISBN: 978-3-030-13980-3.Detail
ŽÁK, S.; HORNÍKOVÁ, J.; ŠANDERA, P.; VOJTEK, T.; KIANICOVÁ, M.; POKLUDA, J. Local and equivalent stress intensity factors for tortuous cracks under remote mode II loading. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2019, vol. 101, no. 1, p. 35-45. ISSN: 0167-8442.Detail
KOTOUL, M.; SKALKA, P.; PROFANT, T.; FRIÁK, M.; ŘEHÁK, P.; ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. Ab Initio Aided Strain Gradient Elasticity Theory in Prediction of Nanocomponent Fracture. MECHANICS OF MATERIALS, 2019, vol. 136, no. 9, p. 103074-1 (103074-10 p.)ISSN: 0167-6636.Detail
PROFANT, T.; POKLUDA, J. The ab-initio aided strain gradient elasticity theory: a new concept for fracture nanomechanics. Frattura ed Integrita Strutturale-Fracture and Structural Integrity, 2019, no. 49, p. 107-114. ISSN: 1971-8993.Detail
2018
POKLUDA, J.; HORNÍKOVÁ, J.; PÍŠKA, M.; ŠANDERA, P. Fatigue Behaviour of Powder Steel Specimens Made by Selective Laser Melting. In 26th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger, 2018. p. 979-984. ISBN: 978-80-87294-79-6.Detail
VOJTEK, T.; HOHENWARTER, A.; PIPPAN, R.; POKLUDA, J. Influence of Secondary Phase on Intrinsic Threshold and Path of Shear-Mode Fatigue Cracks in Metals. ACTA PHYSICA POLONICA A, 2018, vol. 134, no. 3, p. 699-702. ISSN: 1898-794X.Detail
VOJTEK, T.; ŽÁK, S.; POKLUDA, J. Quantitative analysis of intrinsic mode III fatigue thresholds in bcc metals. International Journal of Fatigue, 2018, vol. 115, no. 1, p. 35-41. ISSN: 1879-3452.Detail
HORNÍKOVÁ, J.; ŠANDERA, P.; ŽÁK, S.; POKLUDA, J. Stress Intensity Factors for Cracks Emanating from a Notch under Shear-Mode Loading. In Key Engineering Materials: Advances in Fracture and Damage Mechanics XVII. Key Engineering Materials (print). Trans Tech Publications, 2018. p. 48-53. ISBN: 9783035713503. ISSN: 1013-9826.Detail
KIANICOVÁ, M.; POKLUDA, J.; HORNÍKOVÁ, J.; ŠANDERA, P. The Original Method for Assessment of Residual Stresses in Reinforced Surface Layers. In 26th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger, 2018. p. 1315-1320. ISBN: 978-80-87294-79-6.Detail
SKALKA, P.; SLÁMEČKA, K.; POKLUDA, J.; ČELKO, L. Finite element simulation of stresses in a plasma-sprayed thermal barrier coating with a crack at the TGO/bond-coat interface. SURFACE & COATINGS TECHNOLOGY, 2018, vol. 337, no. 1, p. 321-334. ISSN: 0257-8972.Detail
2017
ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. Energetics of NiTi allotropes under uniaxial compression. SCRIPTA MATERIALIA, 2017, vol. 133, no. 5, p. 92-95. ISSN: 1359-6462.Detail
ŽÁK, S.; HORNÍKOVÁ, J.; ŠANDERA, P.; VOJTEK, T.; POKLUDA, J. Determination of local stress intensity factors at microstructurally tortuous crack fronts under remote mode II loading. In Procedia Structural Integrity. Procedia Structural Integrity. Elsevier, 2017. no. 1, p. 254-261. ISSN: 2452-3216.Detail
SHAYANFARD, P.; HELLER, L.; DOSTÁLOVÁ, D.; ŠANDERA, P.; ŠITTNER, P.; HORNÍKOVÁ, J.; ALARCON, E.; FROST, M.; SEDLÁK, P.; POKLUDA, J. Effect of Martensitic Transformation on Local Stresses and Strains at a Notch of Cyclically Loaded Superelastic NiTi Ribbon. Rhodes, Greece: ICF, 2017. 1 p.Detail
LEJČEK, P.; ŠANDERA, P.; HORNÍKOVÁ, J.; ŘEHÁK, P.; POKLUDA, J. Grain Boundary Segregation of Elements of Groups 14 and 15 and its Consequences for Intergranular Cohesion of Ferritic Iron. JOURNAL OF MATERIALS SCIENCE, 2017, vol. 52, no. 1, p. 5822-5834. ISSN: 1573-4803.Detail
VOJTEK, T.; PIPPAN, R.; HOHENWARTER, A.; POKLUDA, J. Prediction of effective mode II fatigue crack growth threshold for metallic materials. ENGINEERING FRACTURE MECHANICS, 2017, vol. 174, no. 1, p. 117-126. ISSN: 0013-7944.Detail
SLÁMEČKA, K.; POKLUDA. Simple criterion for predicting fatigue life under combined bending and torsion loading. Frattura ed Integrita Strutturale-Fracture and Structural Integrity, 2017, vol. 11, no. 41, p. 123-128. ISSN: 1971-8993.Detail
ČERNÝ, M.; ŘEHÁK, P.; POKLUDA, J. The origin of lattice instability in bcc tungsten under triaxial loading. PHILOSOPHICAL MAGAZINE, 2017, vol. 97, no. 32, p. 2971-2984. ISSN: 1478-6443.Detail
VOJTEK, T.; ŽÁK, S.; POKLUDA, J. On the connection between mode II and mode III effective thresholds in metals. Frattura ed Integrita Strutturale-Fracture and Structural Integrity, 2017, vol. 11, no. 41, p. 245-251. ISSN: 1971-8993.Detail
VOJTEK, T.; POKLUDA, J.; HOHENWARTER, A.; PIPPAN, R. Intrinsic behaviour of mode II and mode III long fatigue cracks in zirconium and the Ti-6Al-4V alloy. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Trans Tech Publications Inc., 2017. no. 1, p. 265-268. ISBN: 978-3-03835-626-4. ISSN: 1662-9779.Detail
SHAYANFARD, P.; ŠANDERA, P.; HORNÍKOVÁ, J.; PETRUŠKA, J.; ŠITTNER, P.; POKLUDA, J. NiTi Self-expanding Vascular Stent Configuration and Biomedical Interaction with Artery: Finite Element Analysis. In Solid State Phenomena. Solid State Phenomena. Švýcarsko: Trans Tech Publications, Switzerland, 2017. no. 1, p. 366-369. ISBN: 978-3-03835-626-4. ISSN: 1662-9779.Detail
2016
LANDA, M.; MACHOVÁ, A.; UHNÁKOVÁ, A.; POKLUDA, J.; LEJČEK, P. Crack growth in Fe–2.7 wt% Si single crystals under cyclic loading and 3D atomistic results in bcc iron. International Journal of Fatigue, 2016, vol. 87, no. 1, p. 63-70. ISSN: 0142-1123.Detail
SLÁMEČKA, K.; SKALKA, P.; ČELKO, L.; POKLUDA, J.; SAUCEDO-MORA, L.; MARROW, T.; THANDAVAMOORTHY, U. Plasma-sprayed thermal barrier coatings: numerical study on damage localization and evolution. Frattura ed Integrita Strutturale-Fracture and Structural Integrity, 2016, vol. 10, no. 35, p. 322-329. ISSN: 1971-8993.Detail
VOJTEK, T.; POKLUDA, J.; HOHENWARTER, A.; PIPPAN, R. Progress in understanding of intrinsic resistance to shear-mode fatigue crack growth in metallic materials. International Journal of Fatigue, 2016, vol. 89, no. 1, p. 36-42. ISSN: 0142-1123.Detail
LEJČEK, P.; ŠANDERA, P.; HORNÍKOVÁ, J.; POKLUDA, J.; GODEC, M. On the Segregation Behavior of Tin and Antimony at Grain Boundaries of Polycrystalline bcc Iron. APPLIED SURFACE SCIENCE, 2016, vol. 363, no. 1, p. 140-144. ISSN: 0169-4332.Detail
SLÁMEČKA, K.; SKALKA, P.; POKLUDA, J.; ČELKO, L. Finite element simulation of stresses in a plasma-sprayed thermal barrier coating with an irregular top-coat/bond-coat interface. SURFACE & COATINGS TECHNOLOGY, 2016, vol. 304, no. 1, p. 574-583. ISSN: 0257-8972.Detail
SLÁMEČKA, K.; ŠESTÁK, P.; VOJTEK, T.; KIANICOVÁ, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. A fractographic study of bending/torsion fatigue failure in metallic materials with protective surface layers. Advances in Materials Science and Engineering, 2016, vol. 2016, no. 1, p. 1-6. ISSN: 1687-8434.Detail
VOJTEK, T.; HOHENWARTER, A.; POKLUDA, J.; PIPPAN, R. Experimental evidence of a common local mode II growth mechanism of fatigue cracks loaded in modes II, III and II+III in niobium and titanium. International Journal of Fatigue, 2016, vol. 92, no. 1, p. 470-477. ISSN: 0142-1123.Detail
ČERNÝ, M.; ŠESTÁK, P.; POKLUDA, J. Stress coupling effect on ideal shear strength: tungsten as a case study. Advances in Materials Science and Engineering, 2016, vol. 2016, no. 12, p. 5317985-1 (5317985-5 p.)ISSN: 1687-8434.Detail
ŠESTÁK, P.; ČERNÝ, M.; HE, J.; ZHANG, Z.; POKLUDA, J. Multiaxial stress-strain response and displacive transformations in NiTi alloy from first principles. ACTA MATERIALIA, 2016, vol. 109, no. 5, p. 223-229. ISSN: 1359-6454.Detail
2015
VOJTEK, T.; POKLUDA, J.; HOHENWARTER, A.; PIPPAN, R. Propagation of Long Fatigue Cracks under Remote Modes II and III in Ferritic-pearlitic Steel. ACTA PHYSICA POLONICA A, 2015, vol. 128, no. 4, p. 611-614. ISSN: 0587-4246.Detail
SLÁMEČKA, K.; ŠESTÁK, P.; VOJTEK, T.; KIANICOVÁ, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Biaxial Fatigue Fractures of Case-Hardened and High-Temperature-Coatings-Protected Specimens. Powder Metallurgy Progress, 2015, vol. 15, no. special, p. 145-149. ISSN: 1335-8987.Detail
POKLUDA, J.; ČERNÝ, M.; ŠOB, M.; UMENO, Y. Ab Initio Calculations of Mechanical Properties: Methods and Applications. PROGRESS IN MATERIALS SCIENCE, 2015, vol. 73, no. 0, p. 127-158. ISSN: 0079-6425.Detail
POKLUDA, J.; VOJTEK, T.; HOHENWARTER, A.; PIPPAN, R. Effects of microstructure and crystallography on crack path and intrinsic resistance to shear-mode fatigue crack growth. Frattura ed Integrita Strutturale-Fracture and Structural Integrity, 2015, vol. 9, no. 34, p. 142-149. ISSN: 1971-8993.Detail
ŽÁK, S.; HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Verification of Linear Dependence of Plastic Zone Size on J-integral for Mixed-mode Loading. Applied Mechanics and Materials, 2015, vol. 751, no. 1, p. 15-20. ISSN: 1660-9336.Detail
HORNÍKOVÁ, J.; ŠANDERA, P.; VOJTEK, T.; POKLUDA, J. Description of Fatigue Crack Propagation under Mixed-mode II+III in Terms of J-integral. Key Engineering Materials (print), 2015, vol. 627, no. 1, p. 145-148. ISSN: 1013-9826.Detail
SLÁMEČKA, K.; ČELKO, L.; SKALKA, P.; POKLUDA, J.; NĚMEC, K.; JULIŠ, M.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Bending fatigue failure of atmospheric-plasma-sprayed CoNiCrAlY + YSZ thermal barrier coatings. International Journal of Fatigue, 2015, vol. 70, no. 1, p. 186-195. ISSN: 0142-1123.Detail
VOJTEK, T.; POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J.; HOHENWARTER, A.; PIPPAN, R. Analysis of fatigue crack propagation under mixed mode II + III in ARMCO iron. International Journal of Fatigue, 2015, vol. 76, no. 1, p. 47-52. ISSN: 0142-1123.Detail
ŠESTÁK, P.; WU, J.; HE, J.; POKLUDA, J.; ZHANG, Z. Extraordinary deformation capacity of smallest carbohelicene springs. PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 2015, vol. 17, no. 28, p. 18684-18690. ISSN: 1463-9076.Detail
SKALKA, P.; SLÁMEČKA, K.; POKLUDA, J.; ČELKO, L. Stability of plasma-sprayed thermal barrier coatings: The role of the waviness of the bond coat and the thickness of the thermally grown oxide layer. SURFACE & COATINGS TECHNOLOGY, 2015, vol. 274, no. 1, p. 26-36. ISSN: 0257-8972.Detail
2014
ŠANDERA, P.; POKLUDA, J.; SCHÖBERL, T.; HORNÍKOVÁ, J.; ČERNÝ, M. Modeling Load-displacement Curve and Pop-in Effect in Nanoindentation Tests. Procedia Materials Science, 2014, vol. 3, no. 1, p. 1111-1116. ISSN: 2211-8128.Detail
VOJTEK, T.; POKLUDA, J. Experimental Investigation of Modes II and III Fatigue Crack Growth in Unalloyed Titanium. Key Engineering Materials (print), 2014, vol. 592-593, no. 797-800, p. 797-800. ISSN: 1013-9826.Detail
VOJTEK, T.; POKLUDA, J.; HOHENWARTER, A.; SLÁMEČKA, K.; PIPPAN, R. 3D Morphology of Fracture Surfaces Created by Mixed-mode II+III Fatigue Loading in Metallic Materials. Procedia Engineering, 2014, vol. 74, no. 1, p. 74-77. ISSN: 1877-7058.Detail
HORNÍKOVÁ, J.; ŠANDERA, P.; ŽÁK, S.; POKLUDA, J. Specimens for Simultaneous Mode II, III and II+III Fatigue Crack Propagation: Elasto-Plastic Solution of Crack Tip Stress-Strain Field. In 11TH INTERNATIONAL FATIGUE CONGRESS. Advanced Materials Research. 1. Melbourne: Trans Tech Publications, 2014. no. 1, p. 1585-1590. ISBN: 978-3-03835-008-8. ISSN: 1022-6680.Detail
POKLUDA, J.; PIPPAN, R.; VOJTEK, T.; HOHENWARTER, A. Near-threshold behaviour of shear-mode fatigue cracks in metallic materials. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2014, vol. 37, no. 3, p. 232-254. ISSN: 8756-758X.Detail
KIANICOVÁ, M.; POKLUDA, J. Fatigue Fracture of Turbine Blades: Case Studies. Key Engineering Materials (print), 2014, vol. 592-593, no. 1, p. 712-715. ISSN: 1013-9826.Detail
ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. On the effect of deformation twins on stability of B19' structure in NiTi martensite. COMPUTATIONAL MATERIALS SCIENCE, 2014, vol. 87, no. 2, p. 107-111. ISSN: 0927-0256.Detail
VOJTEK, T.; POKLUDA, J.; HORNÍKOVÁ, J.; ŠANDERA, P.; SLÁMEČKA, K. Description of Fatigue Crack Growth under Modes II, III and II+III in Terms of J-integral. Procedia Materials Science, 2014, vol. 3, no. 1, p. 835-840. ISSN: 2211-8128.Detail
SLÁMEČKA, K.; NĚMEC, K.; ČELKO, L.; HORNÍKOVÁ, J.; POKLUDA, J.; ŠVEJCAR, J. Bending Fatigue Behaviour of Diffusion and Thermal Barrier Coating Systems. In Key Engineering Materials. Key Engineering Materials (print). Zurich-Durnten, Switzerland: Trans Tech Publications Ltd, 2014. no. 1, p. 716-719. ISBN: 9783037859346. ISSN: 1013-9826.Detail
MACHOVÁ, A.; POKLUDA, J.; UHNÁKOVÁ, A.; HORA, P. 3D Atomistic Studies of Fatigue Behavior of Edge Crack (001) in BCC Iron loaded in mode I and II. International Journal of Fatigue, 2014, vol. 66, no. 1, p. 11-19. ISSN: 0142-1123.Detail
2013
HORNÍKOVÁ, J.; ŠANDERA, P.; ŽÁK, S.; POKLUDA, J. Elasto-plastic Solution of Stress-strain Field at the Crack Tip in Special Specimens for Mode II, III and II+III Fatigue Crack Propagation. Euromat 2013. 1. Sevilla: Barceló Congresos, 2013. p. 617-617. Detail
VOJTEK, T.; POKLUDA, J. Experimental Investigation of Modes II and III Fatigue Crack Growth in Unalloyed Titanium. 7th International Conference on Materials Structure & Micromechanics of Fracture. 2013. p. 179-179. ISBN: 978-80-214-4739-4.Detail
SLÁMEČKA, K.; POKLUDA, J.; KIANICOVÁ, M.; HORNÍKOVÁ, J.; OBRTLÍK, K. Fatigue Life of Cast Inconel 713LC with/without Protective Diffusion Coating under Bending, Torsion and their Combination. ENGINEERING FRACTURE MECHANICS, 2013, vol. 110, no. 1, p. 459-467. ISSN: 0013-7944.Detail
VOJTEK, T.; POKLUDA, J.; HOHENWARTER, A.; PIPPAN, R. Three-dimensional morphology of fracture surfaces generated by mode II and III fatigue loading in ferrite and austenite. ENGINEERING FRACTURE MECHANICS, 2013, vol. 108, no. 1, p. 285-293. ISSN: 0013-7944.Detail
ČERNÝ, M.; ŘEHÁK, P.; UMENO, Y.; POKLUDA, J. Stability and strength of covalent crystals under uniaxial and triaxial loading from first principles. JOURNAL OF PHYSICS-CONDENSED MATTER, 2013, vol. 25, no. 3, p. 035401-035401. ISSN: 0953-8984.Detail
POKLUDA, J. Dislocation-based model of plasticity and roughness-induced crack closure. International Journal of Fatigue, 2013, vol. 46, no. 1, p. 35-40. ISSN: 0142-1123.Detail
ČERNÝ, M.; ŠESTÁK, P.; POKLUDA, J.; ŠOB, M. Shear instabilities in perfect bcc crystals during simulated tensile tests. PHYSICAL REVIEW B, 2013, vol. 87, no. 1, p. 014117-014117. ISSN: 1098-0121.Detail
VOJTEK, T.; PIPPAN, R.; HOHENWARTER, A.; HOLÁŇ, L.; POKLUDA, J. Near-threshold propagation of mode II and mode III fatigue cracks in ferrite and austenite. ACTA MATERIALIA, 2013, vol. 61, no. 12, p. 4625-4635. ISSN: 1359-6454.Detail
SLÁMEČKA, K.; KIANICOVÁ, M.; POKLUDA, J. Fractographically-aided Analysis of Fish-eye Crack Growth in Nitrided Steel. Journal of Theoretical and Applied Mechanics, 2013, vol. 51, no. 2, p. 439-446. ISSN: 1429-2955.Detail
VOJTEK, T.; POKLUDA, J.; HOHENWARTER, A.; PIPPAN, R. Propagation of Long Fatigue Cracks under Remote Mode II, III and II+III in Metals. 13th International Conference on Fracture (ICF13). Beijing: 2013. p. 86-86. ISBN: 978-988-12-2652-5.Detail
HORNÍKOVÁ, J.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Modelling Load-displacement Curve and the Onset of Pop-in during Nanoindentation Tests. Nanomaterials 2013. 1. Cancun: Zing Conferences, 2013. p. 50-50. Detail
2012
POKLUDA, J.; OBRTLÍK, K.; SLÁMEČKA, K.; HORNÍKOVÁ, J.; HUTAŘOVÁ, S.; KIANICOVÁ, M.; PODRÁBSKÝ, T. Fatigue Crack Paths in Cast Inconel 713LC with/without Al Diffusion Coating under Various Loading and Temperature Conditions. In Proceedings of the 4th International Conference on Crack Paths. 2012. s. 967-975. ISBN: 9788895940441.Detail
ČERNÝ, M.; ŠESTÁK, P.; POKLUDA, J. Strength of bcc crystals under combined shear and axial loading from first principles. COMPUTATIONAL MATERIALS SCIENCE, 2012, vol. 55, no. 1, p. 337-343. ISSN: 0927-0256.Detail
VOJTEK, T.; POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J.; SLÁMEČKA, K.; PIPPAN, R.; HOHENWARTER, A. Near-threshold Fatigue Crack Propagation under Mixed-mode II+III in ARMCO Iron. In 19th European Conference on Fracture. Kazan: 2012. p. 188-193. ISBN: 978-5-905576-18-8.Detail
VOJTEK, T.; POKLUDA, J.; HOHENWARTER, A.; PIPPAN, R. Evaluation of Near-Threshold Fatigue Crack Propagation under Mixed Mode II+III in ARMCO Iron. Brno: Institute of Physics of Materials, 2012. 1 p. ISBN: 978-80-87434-05-5.Detail
HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Comparison of Solutions of Stress Field based on Hertzian and Combined Numerical-Crystallographic Approaches beneath Nanoindenter. In Advances in Fracture and Damage Mechanics X. Key Engineering Materials (print). 1. 2012. no. 1, p. 395-398. ISBN: 978-3-03785-218-7. ISSN: 1013-9826.Detail
ŘEHÁK, P.; ČERNÝ, M.; POKLUDA, J. Dynamic stability of fcc crystals under isotropic loading from first principles. JOURNAL OF PHYSICS-CONDENSED MATTER, 2012, vol. 24, no. 21, p. 215403-215403. ISSN: 0953-8984.Detail
VOJTEK, T.; POKLUDA, J.; HORNÍKOVÁ, J.; ŠANDERA, P.; HOHENWARTER, A.; PIPPAN, R. Equivalent K-factor for Near-threshold Mode II+III Fatigue Crack Growth in ARMCO Iron. Oxford: 2012.Detail
POKLUDA, J. Theoretical Strength of Solids: Recent Results and Applications. MATERIALS SCIENCE, 2012, vol. 47, no. 5, p. 575-582. ISSN: 1068-820X.Detail
UHNÁKOVÁ, A.; POKLUDA, J.; MACHOVÁ, A.; HORA, P. 3D Atomistic Simulation of Fatigue Behavior of a Ductile Crack in BCC Iron loaded in mode II. COMPUTATIONAL MATERIALS SCIENCE, 2012, vol. 61, no. 1, p. 12-19. ISSN: 0927-0256.Detail
LEJČEK, P.; POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J.; JENKO, M. Solute Segregation at 46.8deg(111) Twist Grain Boundary of a Phosphorus Doped Fe-2.3%V Alloy. SURFACE SCIENCE, 2012, vol. 606, no. 1, p. 258-262. ISSN: 0039-6028.Detail
VOJTEK, T.; POKLUDA, J. Paths of Shear-mode Cracks in Ferritic and Austenitic Steel. In Proceedings of the 4th International Conference on Crack Paths (CP 2012). Parma: 2012. p. 727-734. ISBN: 9788895940441.Detail
ČERNÝ, M.; POKLUDA, J. [100] loading of fcc based nano-fibre reinforced composites. ACTA PHYSICA POLONICA A, 2012, vol. 122, no. 3, p. 505-508. ISSN: 0587-4246.Detail
2011
HORNÍKOVÁ, J.; ŠANDERA, P.; PANTĚLEJEV, L.; POKLUDA, J. Geometrical Shielding Produced by Intergranular Crack-tip Branching in Fe-V-P Alloy. Key Engineering Materials (print), 2011, vol. 465, no. 1, p. 574-577. ISSN: 1013-9826.Detail
ŘEHÁK, P.; ČERNÝ, M.; POKLUDA, J. The [100] Compressive Strength of Perfect Cubic Crystals under Superimposed Biaxial Stresses. Key Engineering Materials (print), 2011, vol. 465, no. 1, p. 183-186. ISSN: 1013-9826.Detail
UHNÁKOVÁ, A.; POKLUDA, J.; MACHOVÁ, A.; HORA, P. 3D Atomistic Simulation of Fatigue Behaviour of Cracked Single Crystal of bcc Iron Loaded in Mode III. International Journal of Fatigue, 2011, vol. 33, no. 1, p. 1564-1573. ISSN: 0142-1123.Detail
HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Stress Intensity Factors for Surface Semi-elliptical Crack in Cylindrical Specimen under Combined Torsion and Axial Compression. Key Engineering Materials (print), 2011, vol. 452-453, no. 1, p. 673-676. ISSN: 1013-9826.Detail
SLÁMEČKA, K.; POKLUDA, J.; BONAVENTUROVÁ, K.; ČELKO, L. Microfractography of Fish-Eye Fractures in Nitrided Steel. CHEMICKE LISTY, 2011, vol. 105, no. S, p. 721-724. ISSN: 0009-2770.Detail
POKLUDA, J. Dislocation-based and Continuum Models of Crack tip Shielding in Fatigue. Zeszyty naukowe politechniki Opolskiej seria Mechanika. Opole: Politechnika Opole, 2011. no. 343, p. 44-45. ISSN: 1429-6055.Detail
KIANICOVÁ, M.; SLÁMEČKA, K.; POKLUDA, J. Damage of Diffusion Coatings on Turbine Blades. In METAL 2011 Conference Proceedings. Metal. Ostrava: Tanger sro, 2011. p. 840-846. ISBN: 978-80-87294-24-6.Detail
SLÁMEČKA, K.; BONAVENTUROVÁ, K.; POKLUDA, J. Bending and Torsion Fatigue of Inconel 713LC with and withouth Diffusion Coating. In METAL 2011 Conference Proceedings. Metal. Ostrava: Tanger sro, 2011. p. 692-697. ISBN: 978-80-87294-24-6.Detail
ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. Can twinning stabilize B19' structure in NiTi martensite?. INTERMETALLICS, 2011, vol. 2011, no. 19, p. 1567-1572. ISSN: 0966-9795.Detail
ČERNÝ, M.; POKLUDA, J. The theoretical strength of fcc crystals under multiaxial loading. COMPUTATIONAL MATERIALS SCIENCE, 2011, vol. 50, no. 3, p. 2257-2261. ISSN: 0927-0256.Detail
POKLUDA, J.; KIANICOVÁ, M. A New Method for Assessment of Residual Stresses in Reinforced Surface Layers. In Proceedings of the 9th International Conference on Barkhausen Noise and Micromagnetic Testing. 1. Vaajakoski: Stresstech, 2011. p. 02_1 (02_6 p.)ISBN: 978-952-67247-4-4.Detail
SLÁMEČKA, K.; KIANICOVÁ, M.; POKLUDA, J. Fractography of Fish-eye Cracks in Nitride Steel Specimens: Assessment of Residual Fatigue Life. Zeszyty naukowe politechniki Opolskiej seria Mechanika, 2011, vol. z98, no. 1, p. 1-10. ISSN: 1429-6055.Detail
2010
POKLUDA, J.; KIANICOVÁ, M. Assessment of Performance Capability of Turbine Blades with Protective Coatings after Overheating Events. Engineering Failure Analysis, 2010, vol. 17, no. 1, p. 1389-1396. ISSN: 1350-6307.Detail
ŠANDERA, P.; POKLUDA, J.; HORNÍKOVÁ, J.; VLACH, B.; LEJČEK, P.; JENKO, M. Fracture of Polycrystalline Fe-2.3%V-0.12%P Alloy. ENGINEERING FRACTURE MECHANICS, 2010, vol. 77, no. 1, p. 385-392. ISSN: 0013-7944.Detail
POKLUDA, J.; SLÁMEČKA, K.; ŠANDERA, P. Mechanism of Factory-Roof Formation. ENGINEERING FRACTURE MECHANICS, 2010, vol. 77, no. 1, p. 1763-1771. ISSN: 0013-7944.Detail
ČERNÝ, M.; POKLUDA, J. Ideal tensile strength of cubic crystals under superimposed transverse biaxial stresses from first principles. PHYSICAL REVIEW B, 2010, vol. 82, no. 17, p. 174106-174106. ISSN: 1098-0121.Detail
POKLUDA, J.; ŠANDERA, P. Micromechanisms of Fracture and Fatigue: In a Multiscale Context. 1. 1. London: Springer, 2010. 295 p. ISBN: 978-1-84996-265-0.Detail
HOLÁŇ, L.; POKLUDA, J.; PIPPAN, R. Mikromechanismy šíření únavových trhlin ve smykových módech v austenitické oceli. In Víceúrovňový design pokrokových materiálů 10. 2010. s. 107-114. ISBN: 978-80-87434-02-4.Detail
SLÁMEČKA, K.; POKLUDA, J.; KIANICOVÁ, M.; MAJOR, Š.; DVOŘÁK, I. Quantitative fractography of fish-eye crack formation under bending-torsion fatigue. International Journal of Fatigue, 2010, vol. 32, no. 6, p. 921-928. ISSN: 0142-1123.Detail
HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Linear-Elastic and Elastoplastic Mode II and III Crack Tip Stress-Strain Fields in Cylindrical Specimens with Circumferential Crack. Key Engineering Materials (print), 2010, vol. 417-418, no. 1, p. 321-324. ISSN: 1013-9826.Detail
HOLÁŇ, L.; POKLUDA, J.; SLÁMEČKA, K. Local Aspects of Shear-Mode Crack Propagation in Austenitic Steel. CHEMICKE LISTY, 2010, vol. 104, no. 15, p. 314-317. ISSN: 0009-2770.Detail
POKLUDA, J.; KIANICOVÁ, M. Damage and Performance Assessment of Protective Coatings on Turbine Blades. In Gas Turbines. 1. Rijeka: SCIYO, 2010. p. 283-306. ISBN: 978-953-307-146-6.Detail
ČERNÝ, M.; ŠESTÁK, P.; POKLUDA, J. Influence of superimposed normal stress on shear strength of perfect bcc crystals. COMPUTATIONAL MATERIALS SCIENCE, 2010, vol. 47, no. 4, p. 907-910. ISSN: 0927-0256.Detail
ČERNÝ, M.; POKLUDA, J. The theoretical shear strength of fcc crystals under superimposed triaxial stress. ACTA MATERIALIA, 2010, vol. 58, no. 2, p. 3117-3123. ISSN: 1359-6454.Detail
2009
ČERNÝ, M.; POKLUDA, J. The theoretical tensile strength of fcc crystals predicted from shear strength calculations. JOURNAL OF PHYSICS-CONDENSED MATTER, 2009, vol. 21, no. 14, p. 145406-145406. ISSN: 0953-8984.Detail
HOLÁŇ, L.; PIPPAN, R.; POKLUDA, J.; HORNÍKOVÁ, J.; HOHENWARTER, A.; SLÁMEČKA, K. Near-Threshold Propagation of Mode II and Mode III Cracks. In Crack Paths. Vicenza, Italy: University of Parma, 2009. p. 585-592. ISBN: 0000000000000.Detail
SLÁMEČKA, K.; MAJOR, Š.; POKLUDA, J. SEM-stereofotogrammetrie únavových lomu krutove zatežovaných vzorku s obvodovým vrubem. In FSI Junior konference. Brno: VUTIUM, 2009. s. 56-63. ISBN: 978-80-214-3834-7.Detail
ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. Elastic Constants of Austenitic and Martensitic Phases of NiTi Shape Memory Alloy. In Recent Advances in Mechatronics 2008-2009. 1. Berlin: Springer, 2009. p. 1-6. ISBN: 978-3-642-05021-3.Detail
ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. Influence of compound twinning on Young's moduli in NiTi martensite. In ESOMAT 2009 - 8th European Symposium on Martensitic Transformations Prague, Czech Republic, September 7-11, 2009. EDP Sciences, 2009. p. 1-5. ISBN: 978-2-7598-0480-1.Detail
ČERNÝ, M.; POKLUDA, J. Elasticity and Strength of Nano-Fiber Reinforced Composites from First Principles. In Proceedings of the 12th International Conference on Fracture. 2009. p. T03.002 (T03.002 p.)ISBN: 0000000000000.Detail
HOLÁŇ, L.; POKLUDA, J.; SLÁMEČKA, K. Local Aspects of Shear-mode Crack Propagation in Austenitic Steel. In Víceúrovňový design pokrokových materiálů 09. Brno: ÚFM AVČR, 2009. s. 123-130. ISBN: 978-80-254-6070-2.Detail
POKLUDA, J.; SLÁMEČKA, K.; ŠANDERA, P. On the Mechanism of Factory-Roof Formation. In Crack Paths. Vicenza, Italy: University of Parma, 2009. p. 155-166. ISBN: 0000000000000.Detail
HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J.; LEJČEK, P. Phosphorus-Induced Quasi-Brittle Fracture of Fe-2.3% V-0.12% P Alloy. In Fractography. 1. Košice: IMR SAS, 2009. p. 9-16. ISBN: 978-80-968543-8-7.Detail
2008
MAJOR, Š.; PAPUGA, J.; HORNÍKOVÁ, J.; POKLUDA, J. Comparison of Fatigue Criteria for Combined Bending-torsion Loading of Nitrided and Virgin Specimens. Strength of Materials, 2008, vol. 40, no. 1, p. 64-66. ISSN: 0556-171X.Detail
JANOVEC, J.; POKLUDA, J.; LEJČEK, P. Influence of Phosphorus Grain Boundary Segregation on Fracture Behaviour of Iron-base Alloy. Materials Science Forum, 2008, vol. 567-568, no. 1, p. 33-38. ISSN: 0255-5476.Detail
POKLUDA, J.; KIANICOVÁ, M.; ŠVEJCAR, J. Degradation of Protective Coatings of Turbine Blades during Exploitation. In Failures 2008. 1. 2008. p. 231-252. ISBN: 0000000000000.Detail
HOLÁŇ, L.; HOHENWARTER, A.; SLÁMEČKA, K.; PIPPAN, R.; POKLUDA, J. On the Micromechanisms of Fatigue Long Crack Growth under Remote Shear Loading Modes. In Multilevel Approach to Fracture of Materials, Components and Structures (ECF17). 1. Brno: Vutium, 2008. p. 2437-2442. ISBN: 9781617823190.Detail
HÉGR, E.; POKLUDA, J. Slitiny s tvarovou pamětí ve Stewartově plošině. In Víceúrovňový design pokrokových materiálů 2008. Brno, Česká republika: Ústav fyziky materiálů, AVČR, Žižkova 22, Brno 616 62, 2008. s. 163-166. ISBN: 978-80-254-3492-5.Detail
ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. Vliv dvojčete typu (100) na mechanické charakteristiky martenzitické fáze slitiny NiTi. In Víceúrovňový design pokrokových materiálů 2008. Brno, Česká republika: Ústav fyziky materiálů, AVČR, Žižkova 22, Brno 616 62, 2008. s. 211-218. ISBN: 978-80-254-3492-5.Detail
POKLUDA, J.; KIANICOVÁ, M. Degradation of Protective Al-Si Coatings during Exploatation of Gas Turbine Blades. Materials Science Forum, 2008, vol. 567-568, no. 1, p. 309-312. ISSN: 0255-5476.Detail
HOLÁŇ, L.; HOHENWARTER, A.; SLÁMEČKA, K.; PIPPAN, R.; POKLUDA, J. Experimental Evaluation of Fatigue Long Crack Propagation under Remote Shear Loading Modes II and III. Internetový časopis Materiálovotechnologická fakulta STU so sídlom v Trnave, 2008, vol. 8, no. 4, p. 55-59. ISSN: 1335-9053.Detail
ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. Elastic Properties of B19' Structure of NiTi Alloy under Uniaxial and Hydrostatic Loading from First Principles. STRENGTH OF MATERIALS, 2008, vol. 40, no. 1, p. 12-15. ISSN: 0039-2316.Detail
POKLUDA, J.; KONDO, Y.; SLÁMEČKA, K.; KOZÁK, V.; HORNÍKOVÁ, J.; ŠANDERA, P. Microstructural Interpretation of Effective Fatigue Threshold of Structural Steel. In Multilevel Approach to Fracture of Materials, Components and Structures (ECF17). 1. Brno: Vutium, 2008. p. 2216-2219. ISBN: 9781617823190.Detail
POKLUDA, J.; TRATTNIG, G.; MARTINSCHITZ, C.; PIPPAN, R. Straightforward Comparison of Fatigue Crack Growth under Modes II and III. International Journal of Fatigue, 2008, vol. 30, no. 8, p. 1498-1506. ISSN: 0142-1123.Detail
MAJOR, Š.; SLÁMEČKA, K.; KIANICOVÁ, M.; POKLUDA, J. Fractografical Analysis of Fish-eye Formation under Multiaxial Fatigue. In Multilevel Approach to Fracture of Materials, Components and Structures (ECF17). 1. Brno: Vutium, 2008. p. 1143-1149. ISBN: 9781617823190.Detail
ČERNÝ, M.; POKLUDA, J. A Simple Prediction of the Theoretical Tensile Strength of Cubic Crystals based on the Shear Strength Calculations. In Proceedings of 17th European Conference on Fracture: Multilevel Approach to Fracture of Materials, Components and Structures. Brno: VUTIUM, 2008. p. 199-204. ISBN: 9781617823190.Detail
POKLUDA, J.; PODRÁBSKÝ, T.; SLÁMEČKA, K.; POSPÍŠILOVÁ, S.; CHAI, G. Microstructure-aided Analysis of Fatigue Thresholds in Duplex Stainless Steel. Materials Science Forum, 2008, vol. 567-568, no. 1, p. 101-104. ISSN: 0255-5476.Detail
SLÁMEČKA, K.; CHAI, G.; POKLUDA, J. Analysis of Fatigue Crack Propagation and Crack Shielding in Super Duplex Stainless Steel and its Welds. In Multilevel Approach to Fracture of Materials, Components and Structures (ECF17). 1. Brno: Vutium, 2008. p. 2401-2406. ISBN: 9781617823190.Detail
KOTOUL, M.; POKLUDA, J.; ŠANDERA, P.; DLOUHÝ, I.; CHLUP, Z.; BOCCACCINI, A. Toughening effects quantification in glass matrix composite reinforced by alumina platelets. ACTA MATERIALIA, 2008, vol. 56, no. 12, p. 2908-2918. ISSN: 1359-6454.Detail
HOLÁŇ, L.; HOHENWARTER, A.; SLÁMEČKA, K.; PIPPAN, R.; POKLUDA, J. Quantitative Fractography of Fatigue Long Crack Growth under Remote Shear Loading Modes. In 25th Danubia-Adria Symposium on Advances in Experimental Mechanics. 2008. p. 87-88. ISBN: 978-80-01-04162-8.Detail
HORNÍKOVÁ, J.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Multiscale Modelling of Nanoindentation Test in Copper Crystal. ENGINEERING FRACTURE MECHANICS, 2008, vol. 75, no. 12, p. 3755-3762. ISSN: 0013-7944.Detail
ČERNÝ, M.; POKLUDA, J. Tensile Strength of Perfect Cubic Crystals under Superimposed Transverse Plain Stress. Materials Science Forum, 2008, vol. 567-568, no. 1, p. 73-76. ISSN: 0255-5476.Detail
ČERNÝ, M.; POKLUDA, J. Influence of superimposed normal stress on the <112>{111} shear strength in perfect fcc metals. COMPUTATIONAL MATERIALS SCIENCE, 2008, vol. 44, no. 10, p. 127-130. ISSN: 0927-0256.Detail
POKLUDA, J.; KONDO, Y.; SLÁMEČKA, K.; ŠANDERA, P.; HORNÍKOVÁ, J. Assessment of Extrinsic Crack Tip Shielding in Austenitic Steel near Fatigue Threshold. Key Engineering Materials (print), 2008, vol. 385-387, no. 1, p. 49-52. ISSN: 1013-9826.Detail
POKLUDA, J.; KONDO, Y.; SLÁMEČKA, K.; ŠANDERA, P.; HORNÍKOVÁ, J. Assessment of Extrinsic Crack Tip Shielding in Austenitic Steel near Fatigue Threshold. In Fracture and Damage Mechanics. 1. Seoul: TransTech Publication, 2008. p. 49-52. ISBN: 978-0-87849-369-2.Detail
2007
SLÁMEČKA, K.; PONÍŽIL, P.; POKLUDA, J. Quantitative Fractography in Bending-Torsion Fatigue. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, vol. 462, no. 2, p. 359-362. ISSN: 0921-5093.Detail
ČERNÝ, M.; POKLUDA, J. Tensile Strength of Perfect Cubic Crystals under Superimposed Transverse Plain Stress. Brno MSMF5: 2007. 1 p.Detail
ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. Influence of Normal Stress on Shear Strength along (110) and (112) Deformation Paths in B2 NiTi Alloy from First Principles. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, vol. 481-482C, no. 1, p. 247-249. ISSN: 0921-5093.Detail
HORNÍKOVÁ, J.; BURŠÍKOVÁ, V.; ČERNÝ, M.; ŠANDERA, P.; POKLUDA, J. On the Relation between Pop-Ins in Nanoindentation Tests and the Ideal Shear Strength. Dar es Salaam: University of Dar es Salaam, 2007. p. o-88 (o-88 p.)Detail
SLÁMEČKA, K.; POKLUDA, J.; PONÍŽIL, P.; ŠANDERA, P. Reconstruction and Evaluation of 3D Fracture Surface Morphology. In Advances in Computational & Experimental Engineering and Sciences. 2007. p. 1507-1513. ISBN: 0-9717880-3-0.Detail
POKLUDA, J.; ŠANDERA, P.; OHLÍDAL, M.; ČERNÝ, M.; PILCH, J.; FLORIAN, Z.; SLÁMEČKA, K.; ŠESTÁK, P.; DOLOŽÍLEK, M.; HORNÍKOVÁ, J. Physical Engineering: Research Support of Mechatronic Models. In Simulation Modelling of Mechatronic Systems II. mechatronika. Brno: VUT v Brně, 2007. p. 15-27. ISBN: 978-80-214-3559-9.Detail
SLÁMEČKA, K.; POKLUDA, J.; PONÍŽIL, P.; MAJOR, Š.; ŠANDERA, P. On the topography of fracture surfaces in bending-torsion fatigue. ENGINEERING FRACTURE MECHANICS, 2007, vol. 75, no. 1, p. 760-767. ISSN: 0013-7944.Detail
POKLUDA, J.; PIPPAN, R. Analysis of Roughness-Induced Crack Closure Based on Asymmetric Crack-Wake Plasticity and Size Ratio Effect. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, vol. 462, no. 1, p. 355-358. ISSN: 0921-5093.Detail
HORNÍKOVÁ, J.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Multiscale modelling of nanoindentation test in Cu crystal. ENGINEERING FRACTURE MECHANICS, 2007, vol. 76, no. 1, 8 p. ISSN: 0013-7944.Detail
JANOVEC, J.; JENKO, M.; LEJČEK, P.; POKLUDA, J. Grain Boundary Segregation of Phosphorus and Silicon in Polycrystals and Bicrystals of the Fe-2.6Si-0.055P Alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, vol. 462, no. 1, p. 441-445. ISSN: 0921-5093.Detail
ČERNÝ, M.; POKLUDA, J. Influence of normal stress on theoretical shear strength of fcc metals. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, vol. 483-484C, no. 1, p. 692-694. ISSN: 0921-5093.Detail
HORNÍKOVÁ, J.; BURŠÍKOVÁ, V.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Multiscale Modelling of Nanoindentation Test in Nickel Crystal. Acta Metallurgica Slovaca, 2007, vol. 13, no. 6, p. 65-69. ISSN: 1335-1532.Detail
HORNÍKOVÁ, J.; ČERNÝ, M.; ŠANDERA, P.; POKLUDA, J. Onset of Microplasticity in Copper Crystal during Nanoindentation. Key Engineering Materials (print), 2007, vol. 348-349, no. 1, p. 801-804. ISSN: 1013-9826.Detail
HORNÍKOVÁ, J.; BURŠÍKOVÁ, V.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Multiscale Modelling of Nanoindentation Test in Nickel Crystal. Brno: Vutium, 2007. p. 24-24. Detail
ČERNÝ, M.; POKLUDA, J. Influence of superimposed biaxial stress on the tensile strength of perfect crystals from first principles. PHYSICAL REVIEW B, 2007, vol. 76, no. 2, 5 p. ISSN: 1098-0121.Detail
MAJOR, Š.; PAPUGA, J.; HORNÍKOVÁ, J.; POKLUDA, J. Comparison of Fatigue Criteria for Combined Bending-torsion Loading of Nitrided and Virgin Specimens. Brno: Vutium, 2007. p. 148-148. Detail
PILCH, J.; POKLUDA, J.; FLORIAN, Z.; HELLER, L.; ŠANDERA, P.; HORNÍKOVÁ, J. Thermomechanical Properties of Nitinol Wires for Stewart Platform. AT&P journal PLUS, 2007, vol. 2007, no. 1, p. 63-66. ISSN: 1336-5010.Detail
ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. Ab-initio modeling deformations of NiTi. AT&P journal PLUS, 2007, vol. 2007, no. 1, p. 67-69. ISSN: 1336-5010.Detail
HORNÍKOVÁ, J.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Multiscale Modelling of Nanoindentation Test in Copper Crystal. Brno: Vutium, 2007. p. 45-45. Detail
ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. Vliv dvojčatění na mechanické vlastnosti martenzitické struktury B19' slitiny Niti Z prvních principů. In Víceúrovňový design pokrokových materiálů 07. Brno: Ústav fyziky materiálů AVČR, 2007. s. 31-36. ISBN: 978-80-254-0793-6.Detail
KOTOUL, M.; POKLUDA, J.; ŠANDERA, P.; DLOUHÝ, I.; CHLUP, Z.; BOCCACCINI, A. Experimental and theoretical investigation of fracture in glass matrix composites reinforced by alumina platelets. In Fracture Mechanics of Concrete and Concrete Structures. Taylor&Francis, 2007. p. 1691-1698. ISBN: 978-0-415-44066-0.Detail
2006
HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Computation of Effective Fatigue Thresholds Based on a New Concept of Crack Closure. In 5th International Conference on Fracture and Damage Mechanics. 1. Harbin: Trans Tech Publications, 2006. p. 803-806. ISBN: 0-87849-413-8.Detail
POKLUDA, J. Šíření a zastavování únavových trhlin. In Letná škola únavy materiálov 06. 2006. Žilina: Žilinská univerzita, 2006. s. 1-10. ISBN: 80-8070-582-8.Detail
MAJOR, Š.; PONÍŽIL, P.; SLÁMEČKA, K.; POKLUDA, J. 3D-Fractography in Bending-Torsion Fatigue. In Crack Paths. Parma: University of Parma, 2006. 8 p.Detail
HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Modelling Crack-Tip Shielding Effects in Particle Reinforced Composites. In ECF 16. Alexandroupolis: ESIS, 2006. 7 p.Detail
POKLUDA, J.; ŠANDERA, P.; PIPPAN, R. Analysis of Crack Closure Level in Terms of Crack-Wake Plasticity. In 9th International Fatigue Congress. Atlanta (USA): Elsevier, 2006. 9 p.Detail
SLÁMEČKA, K.; MAJOR, Š.; PONÍŽIL, P.; POKLUDA, J. Roughness and Fractal Analysis in Bending-Torsion Fatigue. In Fractography 2006. 1. Stará Lesná: ÚMV SAV, 2006. p. 90-96. ISBN: 80-968543-5-6.Detail
POKLUDA, J.; SLÁMEČKA, K.; HORNÍKOVÁ, J.; ŠANDERA, P. On the Reconstruction of Crack Paths in Biaxial Fatigue. In Fractography 2006. 1. Stará Lesná: ÚMV SAV, 2006. p. 497-500. ISBN: 80-968543-5-6.Detail
ČERNÝ, M.; POKLUDA, J. Ab initio Study of Elasticity and Strength of Nano-fibre Reinforced Composites. In Fracture of Nano and Engineering Materials and Structures. Alexandroupolis: Springer, 2006. 6 p. ISBN: 1-4020-4971-4.Detail
ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. MECHANICKÉ CHARAKTERISTIKY KRYSTALŮ SLITINY NITI STANOVENÉ POMOCÍ AB-INITIO METOD. In Víceúrovňový design pokrokových materiálů 06. Brno: Ústav fyziky materiálů AVČR, 2006. s. 31-38. ISBN: 80-239-8271-0.Detail
POKLUDA, J. Šíření a zastavování únavových trhlin. In Letná škola únavy materiálov 06. 1. Žilina: Žilinská univerzita, 2006. s. 9-18. ISBN: 80-8070-582-8.Detail
ČERNÝ, M.; POKLUDA, J. Elasticity and Strength of Nano-Fibre Reinforced Composites from First Principles. In From the Science of Composites to Engineering Applications: the dawning future of composites. Biarritz, France: 2006. 7 p.Detail
ŠANDERA, P.; HORNÍKOVÁ, J.; POKLUDA, J. On the Correspondence of 2D and 3D Grain Size Statistics in Ultra-fine Grain Materials. S4G. Praha: 2006.Detail
CHAI, G.; POKLUDA, J. Influence of Temperature on Fatigue Thresholds of Duplex Stainless Steel. In Fatigue 06. Atlanta (USA): Elsevier, 2006. 9 p.Detail
POKLUDA, J.; HORÁKOVÁ, H.; SLÁMEČKA, K. Predikce únavové životnosti při zatížení v kombinaci ohyb-krut a fraktografická analýza oceli ČSN 41 5340. In Víceúrovňový design pokrokových materiálů 06. 1. Brno: ÚFM AV ČR, 2006. s. 135-142. ISBN: 80-239-8271-0.Detail
ŠANDERA, P.; PONÍŽIL, P.; POKLUDA, J. Change of 3D Grain Structure of Cu Specimens Prepared by ECAP Caused by Cyclic Deformation. Nano06. 1. VUTIUM, 2006. 1 p. ISBN: 80-214-3308-6.Detail
SLÁMEČKA, K.; PONÍŽIL, P.; POKLUDA, J. Quantitative Fractography in Bending-Torsion Fatigue. 2006.Detail
ČERNÝ, M.; POKLUDA, J. Influence of Normal Stress on Theoretical Shear Strength of fcc Metals. ICSMA14 abstract booklet. Xian, Čína: 2006. 1 p.Detail
ČERNÝ, M.; POKLUDA, J. First Principles Study of Vanadium Based Composites Reinforced by Tungsten Nano-fibres. PSIK/COST workshop booklet. Wroclaw: 2006. 1 p.Detail
POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J. Low Fatigue Crack Growth Thresholds in ultra-Fine Grained Metallic Materials. Advances in Nanostructured Materials, Processing - Microstructure - Properties (Nanoved06). 1. Stará Lesná: 2006.Detail
POKLUDA, J.; ŠANDERA, P.; OHLÍDAL, M.; DOLOŽÍLEK, M.; RYNDOVÁ, A.; VLACH, B. Physical Engineering: Research Support of Mechatronic Models. In Simulation Modelling of Mechatronic Systems II. mechatronika. Brno: VUT v Brně, 2006. p. 15-30. ISBN: 80-214-3341-8.Detail
JANOVEC, J.; LEJČEK, P.; POKLUDA, J.; JENKO, M. Effects of Grain Size and Grain Boundary Segregation on Fracture Behaviour of a Polycrystalline Fe-2.65Si-0.028P Alloy. KOVOVE MATERIALY-METALLIC MATERIALS, 2006, vol. 44, no. 1, p. 81-87. ISSN: 0023-432X.Detail
POKLUDA, J.; MAJOR, Š.; HORNÍKOVÁ, J. Biaxial Fatigue Life of Plasma-Nitrided and Virgin Specimens. In Životnost materiálů a konstrukcí. 1. Brno: ÚFM AV ČR, 2006. p. 23-27. ISBN: 80-239-6751-7.Detail
JANOVEC, J.; POKLUDA, J.; JENKO, M.; LEJČEK, P.; VLACH, B.; HORNÍKOVÁ, J. Influence of Phosphorus Enrichment at Grain Boundaries on Energy of Intergranular Fracture in Fe-Si-P Alloys. SURFACE AND INTERFACE ANALYSIS, 2006, vol. 38, no. 4, p. 401-405. ISSN: 0142-2421.Detail
POKLUDA, J.; DVOŘÁK, I.; HORÁKOVÁ, H.; MAJOR, Š. Influence of Plasma-Nitriding Surface Layer on Fatigue Life of Steel Specimens under Push-Pull and Bending-Torsion. In Fatigue 06. Atlanta (USA): Elsevier, 2006. 10 p.Detail
ČERNÝ, M.; POKLUDA, J. Influence of Superimposed Normal Loading on the Shear Strength in bcc Metals. In Conference proceedings MMM2006. Stuttgart: Fraunhofer IRB Verlag, 2006. p. 414-417. ISBN: 3-8167-7206-4.Detail
ŠANDERA, P.; POKLUDA, J. Relationships between 2D and 3D Grain Size Statistics. Nanostructured Materials. Indian Institute of Science, 2006. 1 p.Detail
ČERNÝ, M.; POKLUDA, J. First Principles Study of Vanadium Based Composites Reinforced by Tungsten Nano-fibers. In Nano 06. FSI VUT Brno: VUTIUM, 2006. p. 297-300. ISBN: 80-214-3331-0.Detail
HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Computation of Effective Fatigue Thresholds Based on a New Concept of Crack Closure. Key Engineering Materials (print), 2006, vol. 324-325, no. 1, p. 324-325. ISSN: 1013-9826.Detail
SLÁMEČKA, K.; POKLUDA, J. On the Fracture Morphology in Bending-Torsion Fatigue. In New Methods of Damage and Failure Analysis of Structural Parts. 1. Ostrava: VŠB-TU, 2006. p. 111-117. ISBN: 80-248-1126-X.Detail
ŠANDERA, P.; PONÍŽIL, P.; POKLUDA, J. Change of 3D Grain Structure of Cu Specimens Prepared by ECAP Caused by Cyclic Deformation. In Nano 06. 1. Brno: Vutium, 2006. p. 194-197. ISBN: 80-214-3331-0.Detail
2005
ČERNÝ, M., POKLUDA, J. Elasticity and stability of Fe-P ordered systems from first principles. Materials Science Forum, 2005, vol. 482, no. 3, 138 p. ISSN: 0255-5476.Detail
ČERNÝ, M., POKLUDA, J. Ab initio Study of Elasticity of Nano-Fibre Reinforced Composites. In Nano 05. Brno: Auda, 2005. p. 161-166. ISBN: 80-214-3085-0.Detail
POKLUDA, J.; ŠANDERA, P. On the Crack Closure Effect in Metallic Nanomaterials. In Nano 05. 1. Brno: Vutium, 2005. p. 213-218. ISBN: 80-214-3085-0.Detail
HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Influence of Tempering Temperature on Mechanical Properties of Ultra-High Strength Low-Alloy Steels. In Super-High Strength Steels 05. 1. Rome: AIM & CSM Italy, 2005. 11 p. ISBN: 80-214-3085-0.Detail
HORÁKOVÁ, H.; POKLUDA, J.; DVOŘÁK, I. Improvement of Biaxial Fatigue Live of Steel Specimens by Surface Nitriding. In Juniormat 05. Brno: 2005. p. 111-114. ISBN: 80-214-2984-4.Detail
JANOVEC, J.; JENKO, M.; POKLUDA, J.; VLACH, B.; LEJČEK, P.; SVOBODA, M.; ŠANDERA, P. Effect of Grain Boundary Segregation on Mechanical Properties of P-Doped Fe-Si Base Alloys. Materials Science Forum, 2005, vol. 482, no. 0, p. 191-194. ISSN: 0255-5476.Detail
HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J.; KOTOUL, M. On the Crack Tip Shielding in Particle Reinforced Composites. In 4th International Conference on Fracture and Damage Mechanics. 1. Mallorca, Spain: 2005. p. 509-512. ISBN: 0-9547783-1-6.Detail
ČERNÝ, M.; ŠESTÁK, P.; POKLUDA, J. First Principles Study of Ni-Ti Ordered Systems under Isotropic Loading. In Juniormat'05. Brno: Vysoké učení technické v Brně, Fakulta strojního inženýrství, 2005. 4 p. ISBN: 80-214-2984-4.Detail
HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. On the Crack Tip Shielding in Particle Reinforced Composites. Materials Science Forum, 2005, vol. 482, no. 0, p. 311-314. ISSN: 0255-5476.Detail
POKLUDA, J. Physical Support of Mechatronic Models. In Simulation Modelling of Mechatronic Systems I. Mechatronika. Brno: Faculty of Mechanical Engineering, Brno University of Technology, 2005. p. 11-16. ISBN: 80-214-3144-X.Detail
ČERNÝ, M.; POKLUDA, J. Ab initio study of shear strength of fcc metals: influence of normal stress. Schwaebisch Gmuend: 2005. 1 p.Detail
ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. First Principles Study of Shear Deformation Path in NiTi Alloy in B2 Structure: Influence of Normal Stress. In Víceúrovňový design pokrokových materiálů. Brno: ÚFM AV ČR, 2005. p. 27-34. ISBN: 80-239-6145-4.Detail
POKLUDA, J.; PIPPAN, R. Can a Pure Mode III Fatigue Loading Contribute to Crack Propagation in Metallic Materials?. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2005, vol. 28, no. 0, p. 179-186. ISSN: 8756-758X.Detail
HORÁKOVÁ, H.; MAJOR, Š.; POKLUDA, J. Vliv plazmové nitridace ocelových vzorků na únavovou životnost při biaxiálním zatěžování. In Víceúrovňový design pokrokových materiálů. 1. 2005. s. 155-162. ISBN: 80-239-6145-4.Detail
HORÁKOVÁ, H.; POKLUDA, J.; DVOŘÁK, I. Influence of Plasma-Nitriding Surface Layer on Fatigue Life of Steel Specimens under Biaxial Loading. Materiálové inžinierstvo, 2005, vol. 12, no. 3, p. 123-125. ISSN: 1335-0803.Detail
POKLUDA, J.; ŠANDERA, P. Simple Method for Estimation of Fatigue Loading and Useful Life from Fracture Morphology. In International Congres on Fracture (ICF 11). Torino: Centro Congressi Internazionale, 2005. p. 5548_1 (5548_4 p.)Detail
POKLUDA, J.; PIPPAN, R. Analysis of Roughness-Induced Crack Closure Based on Asymmetric Crack-Wake Plasticity and Size Ratio Effect. 2005.Detail
SLÁMEČKA, K.; POKLUDA, J. Analysis of Fracture Morphology and Local Loading Modes in Torsional Fatigue. Materials Science Forum, 2005, vol. 482, no. 0, p. 263-266. ISSN: 0255-5476.Detail
POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J. Analysis of Roughness-Induced Crack-Tip Shielding in Terms of Size Ratio Effect. Journal of ASTM International, 2005, vol. 2, no. 4, p. 1-15. ISSN: 1546-962X.Detail
ŠOB, M.; POKLUDA, J.; ČERNÝ, M.; ŠANDERA, P.; VÍTEK, V. Theoretical Strength of Metals and Intermetallics from First Principles. Materials Science Forum, 2005, vol. 482, no. 0, 4 p. ISSN: 0255-5476.Detail
2004
POKLUDA, J. Theoretical Strength of Solids. Communications, 2004, vol. 5, no. 2, 7 p. ISSN: 1335-4205.Detail
SLÁMEČKA, K., POKLUDA, J. 3D Analysis of Fatigue Fracture Morphology Generated by Combined Bending - Torsion. In Advanced Fracture Mechanics for Life and Safety Assesments (ECF15). Stockholm: 2004. 6 p.Detail
ČERNÝ, M., POKLUDA, J. Elastic and magnetic stability of crystals under compression. Europhysic conference abstract. Italy: European Physical Society, 2004. 2 p. ISBN: 2-914771-19-3.Detail
POKLUDA, J. ŠANDERA, P. HORNÍKOVÁ, J. Statistical Approach to Roughness-Induced Shielding Effects. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2004, vol. 27, no. 2, 17 p. ISSN: 8756-758X.Detail
ČERNÝ, M.; POKLUDA, J.; ŠANDERA, P. Ab initio analysis of theoretical isotropic strength and elasticity of nickel aluminide compounds. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, vol. 387-389C, no. 12, 3 p. ISSN: 0921-5093.Detail
ČERNÝ, M.; POKLUDA, J. Stability of FCC crystals under hydrostatic loading. Journal of Alloys and Compounds, 2004, vol. 378, no. 1-2, p. 159-162. ISSN: 0925-8388.Detail
ČERNÝ, M.; ŠOB, M.; POKLUDA, J.; ŠANDERA, P. Ab initio calculations of ideal tensile strength and mechanical stability in copper. JOURNAL OF PHYSICS-CONDENSED MATTER, 2004, vol. 16, no. 2, 8 p. ISSN: 0953-8984.Detail
POKLUDA, J., ČERNÝ, M., ŠANDERA, P., ŠOB, M. Calculations of Theoretical Strength: State of the Art and History. Journal of Computer-Aided Materials Design, 2004, vol. 11, no. 1, 28 p. ISSN: 0928-1045.Detail
2003
POKLUDA, J., ŠANDERA, P., HORNÍKOVÁ, J., VLACH, B. Fracture Surfaces in Fe-0.05%C-2.6%Si Alloy Contaminated by Phosphorus. In Fractography 2003. Košice: 2003. 4 p. ISBN: 80-968543-2-1.Detail
NEMEŠ, R., POKLUDA, J. Životnost válcových vzorků s obvodovým vrubem při víceosém únavovém namáhání. In Degradácia 03. Žilina: 2003. 6 s. ISBN: 80-8070-112-1.Detail
SLÁMEČKA, K.; SABIROV, I.; POKLUDA, J.; PIPPAN, R. 3D Morphology of Fracture Surfaces in Bending-Torsion Fatigue. In Transcom. Žilina: ŽU Žilina, 2003. 4 p. ISBN: 80-8070-084-2.Detail
POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J. Analysis of Roughness-Induced Shielding in Terms of Size Ratio Effect. In nd International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics. Tampa, Florida: 2003. 1 p.Detail
POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J. 3D Statistical Characteristics of Grain Size in Ultra-Fine Grained Ceramics. In Nano03. Brno: 2003. 1 p. ISBN: 80-214-2486-9.Detail
ŠANDERA, P.; POKLUDA, J.; HORNÍKOVÁ, J. 3D Statistical Characteristics of Grain Size in Ultra Fine Grained Ceramics. In Nano 03. Brno: 2003. 6 p. ISBN: 80-214-2527-X.Detail
NEMEŠ, R., POKLUDA, J. Životnost vysocepevné nízkolegované oceli při víceosém únavovém namáhání. In Materiály a technologie ve výrobě speciální techniky - IDET 2003. Brno: 2003. 6 s.Detail
SLÁMEČKA, K.; POKLUDA, J. Stereofotogrammetrická analýza multiaxiálních lomových povrchů oceli ČSN 15340. In Degradácia 03. Žilina: ŽU Žilina, 2003. 5 s. ISBN: 80-8070-112-1.Detail
NEMEŠ, R.; SLÁMEČKA, K.; POKLUDA, J. Biaxial Fatigue of High-Strength Low-Alloy Steel. In Transcom. Žilina: ŽU Žilina, 2003. 4 p. ISBN: 80-8070-084-2.Detail
POKLUDA, J., PIPPAN, R., SLÁMEČKA, K., KOLEDNIK, O. Fatigue Crack Growth in Metals under Pure Mode III: Reality or Fiction?. In Fatigue Crack Paths. Parma: 2003. 1 p.Detail
ČERNÝ, M.; POKLUDA, J. Ab Initio Analysis of Elasticity and Stability of Fe-P Ordered Systems. In Juniormat '03. Neuveden. Brno: Brno University of Technology, Faculty of Mechanical Engineering, 2003. 4 p. ISBN: 80-214-2462-1.Detail
ČERNÝ, M.; POKLUDA, J.; ŠOB, M.; FRIÁK, M.; ŠANDERA, P. Ab initio calculations of elastic and magnetic properties of Fe, Co, Ni, and Cr crystals under isotropic deformation. PHYSICAL REVIEW B, 2003, vol. 67, no. 1, p. 035116-1 (035116-8 p.)ISSN: 1098-0121.Detail
2002
POKLUDA, J., ŠANDERA, P., HORNÍKOVÁ, J. Application of Statistical Concept of Roughness-Induced Crack Closure to Titanium and Aluminium Alloys. In Fatigue 02. Stockholm: EMAS, 2002. 8 p. ISBN: 1-901537-32-3.Detail
ČERNÝ, M.; ŠOB, M.; ŠANDERA, P.; POKLUDA, J. Ab initio Calculations of Theoretical Strength of Copper under Uniaxial Tension. Bulletin of the American Physical Society. 2002. no. 1, 1 p. ISSN: 0003-0503.Detail
ČERNÝ, M., ŠANDERA, P., POKLUDA, J., ŠOB, M. Influence of Magnetism on Results of Ab Initio Calculations of Mechanical Properties of Crystals. In FSI Junior konference 2001. Brno: VUTIUM, 2002. 4 p. ISBN: 80-214-2071-5.Detail
POKLUDA, J. Únavová životnost při víceosém namáhání. Materiálové inžinierstvo, 2002, roč. 9, č. 1, 8 s. ISSN: 1335-0803.Detail
POKLUDA, J.; ŠANDERA, P. Determination of Critical Nanostructure Parameters by Means of Quantitative Metallography and Nanoindentation. Brno: Cerm, 2002. 1 p.Detail
ŠANDERA, P., HORNÍKOVÁ, J., POKLUDA, J. Simple Calculation of Geometrical Shielding at Intergranular Crack Front by Means of Pyramidal Model. In Fracture Mechanics Beyond 2000, ECF 14. Krakow: EMAS, 2002. 8 p. ISBN: -88906-04-6.Detail
POKLUDA, J., ŠANDERA, P. Stanovení kritických parametrů nanostruktury pomocí kvantitativní metalografie a nanoindentace. In Nanovědy, nanotechnologie a nanomateriály v České republice - Nano02. Ostrava: Repronis Ostrava, 2002. 4 s. ISBN: 80-7329-027-8.Detail
2001
GORDIENKO, Y., ZASIMCHUK, E., POKLUDA, J. Multiscale Correlation Effects during Fatigue Damage Evolution Observed by Surface Roughness Analysis. In Materials Structure & Micromechanics of Fracture (MSMF-3). Brno: Vutium, 2001. 8 p. ISBN: 80-214-1892-3.Detail
DOBROVSKÁ, J., DOBROVSKÁ, V., POKLUDA, J., STRÁNSKÝ, K., MANDRINO, D., JENKO, M. Microheterogeneity in the Ultra-High Strength Low Alloy Steel after Three Regimes of Heat-Treatment. In Materials Structure & Micromechanics of Fracture (MSMF-3). Brno: Vutium, 2001. 11 p. ISBN: 80-214-1892-3.Detail
SLÁMEČKA, K., POKLUDA, J., BARTÍK, L. Životnost nízkolegované oceli při kombinovaném namáhání v krutu a ohybu. In Degradácia vlastností konštrukčných materiálov únavou. Žilina: ŽU Žilina, 2001. 6 s. ISBN: 80-7100-873-7.Detail
HORNÍKOVÁ, J., ŠANDERA, P., POKLUDA, J. Effective Stress Intensity Factor for Crack of Intergranular Morphology. In Materials Structure & Micromechanics of Fracture (MSMF-3). Brno: Vutium, 2001. 9 p. ISBN: 80-214-1892-3.Detail
POKLUDA, J., VLACH, B., ŠANDERA, P., JURÁŠEK, L. Contradiction in Fracture- and Notch Toughness of High Purity Low Alloy Steels. In Cleaner Metal for Industrial Exploitation. Řež: Inst. Nuclear Research, 2001. 8 p. ISBN: 92-828-8323-X.Detail
ČERNÝ, M.; ŠANDERA, P.; POKLUDA, J. Ab initio Modelling Deformation of Perfect Cubic Crystals under Triaxial Tension. In Materials Structure & Micromechanics of Fracture (MSMF-3). Brno: Vutium, 2001. 6 p. ISBN: 80-214-1892-3.Detail
ŠANDERA, P., POKLUDA, J., HORNÍKOVÁ, J. Pyramidal Model of Intergranular Crack Front. In Materials Structure & Micromechanics of Fracture (MSMF-3). Brno: Vutium, 2001. 5 p. ISBN: 80-214-1892-3.Detail
DLOUHÝ, I.; VÁLKA, L.; POKLUDA, J. Competition of Transgranular and Intergranular Failure of Brittle Fracture Initiation. In Cleaner Metal for Industrial Exploitation. Řež: Inst. Nuclear Research, 2001. p. 62-73. ISBN: 92-828-8323-X.Detail
ČERNÝ, M.; ŠANDERA, P.; POKLUDA, J.; FRIÁK, M.; ŠOB, M. Ab initio Simulation of Three-Axial Deformation of Perfect Iron Crystal. In Materials Structure & Micromechanics of Fracture (MSMF-3). Brno: Vutium, 2001. p. 146-150. ISBN: 80-214-1892-3.Detail
POKLUDA, J., ŠANDERA, P., HORNÍKOVÁ, J. Kvantitativní interpretace závislosti rozkmitu prahových hodnot K-faktoru na střední velikosti zrna ARMCO železa. In Degradácia vlastností konštrukčných materiálov únavou. Žilina: ŽU Žilina, 2001. 5 s. ISBN: 80-7100-873-7.Detail
POKLUDA, J. Tortuous Cracks under Remote Mode I: the Statistical LEFM Approach. Zeszyty naukowe politechniki Opolskiej seria Mechanika, 2001, vol. 67, no. 7, 20 p. ISSN: 1429-6055.Detail
POKLUDA, J., VLACH, B., ŠANDERA, P., JURÁŠEK, L. Antagonism in Fracture and Notch Toughness of UHSLA Steels. In Charpy Centenary Conference 2001. Les Fontelles: SF2M Les Fontelles, 2001. 8 p.Detail
ŠANDERA, P., HORNÍKOVÁ, J., POKLUDA, J. Aproximální výpočet stínícího efektu na čele interkrystalické trhliny pomocí pyramidálního modelu. In Křehký lom. Brno: ÚFM AV ČR, 2001. 6 s.Detail
2000
POKLUDA, J., ŠANDERA, P. Evolution of Ideal Strength Calculations. In Metal 2000. Ostrava: Tanger Ostrava, 2000. 1 p. ISBN: 80-85988-48-8.Detail
HORNÍKOVÁ, J., ŠANDERA, P., POKLUDA, J. Effective Stress Intensity Factor for the Straight Crack Front with 3D-Ledges. In EUROMAT 99. Muenchen (SRN): Wiley-VCH, 2000. 4 p. ISBN: 3-527-30122-4.Detail
POKLUDA, J., ŠANDERA, P., HORNÍKOVÁ, J. Statistical Model of Roughness Induced Crack Closure. In Fracture Mechanics: Applications and Challenges, ECF 13. San Sebastian: Elsevier, 2000.Detail
POKLUDA, J., VLACH, B., ŠANDERA, P., JANOVÁ, D., HORNÍKOVÁ, J. Fraktografická podpora interpretace anomálního vztahu lomové a vrubové houževnatosti ultrapevné oceli. In Fractography 2000. Košice: ÚMV SAV, 2000. 4 s. ISBN: 80-968468-3-3.Detail
BARTÍK, L., POKLUDA, J., ŠANDERA, P. Mechanical Properties and Structure of Low-Alloy Ultra-High Strength Steels. In Euromat 99. Muenchen (SRN): Wiley-VCH, 2000. 6 p. ISBN: 3-527-30195-X.Detail
POKLUDA, J., SAXL, I., ŠANDERA, P., PONÍŽIL, P., MATOUŠEK, M., PODRÁBSKÝ, T., HORNÍKOVÁ, J. Real-like Polycrystal with Intergranular Crack. In Euromat 2000. Tours (Francie): Elsevier, 2000. 5 p. ISBN: 0-08-042815-0.Detail
POKLUDA, J., UNČOVSKÝ, M., OHLÍDAL, M. Analysis of crack initiation stage by means of laser beam scattering. In Life assessment and management for structural components. Kiev, Ukraine: National Academy of Sciences of Ukraine, Institute of Problems of Strength, 2000. 6 p.Detail
1999
ČERNÝ, M.; ŠANDERA, P.; POKLUDA, J. Ab Initio Calculation of Ideal Strength for Cubic Crystals Under Three-axial Tension. Czechoslovak Journal of Physics, 1999, vol. 49, no. 10, 7 p. ISSN: 0011-4626.Detail
POKLUDA, J., ŠVEJCAR, J. Structural Analysis of Fatigue Crack Growth in Ferritic Ductile Iron. In Fatigue '99. Beijing, China: EMAS, 1999. 6 p. ISBN: 1-901537-0.Detail
HORNÍKOVÁ, J., POKLUDA, J., ŠANDERA, P. Efektivní součinitel intenzity napětí pro dvojnásobně vyhnutou trhlinu ve Voronoiově mozaice. Inženýrská mechanika - Engineering Mechanics, 1999, roč. 6, č. 2, 6 s. ISSN: 1210-2717.Detail
POKLUDA, J., ŠANDERA, P. Three-Dimensional Modelling of Intergranular Fracture. In Physical Metallurgy and Fracture of Materials '99. Herľany, Slovenská republika: TU Košice, 1999. 4 p. ISBN: 80-7099-43.Detail
POKLUDA, J., UNČOVSKÝ, M. Application of Laser Beam Scattering Method to the Analysis of Fatigue Damage Evolution. In Fatigue '99. Beijing, China: EMAS, 1999. 6 p. ISBN: 1-901537-1.Detail
1998
ŠANDERA, P., POKLUDA, J., PONÍŽIL, P. Simulation of 3D Intergranular Crack. In 2nd International Colloquium on Materials Structure & Microm. Brno: VUT Brno, 1998. 1 p.Detail
BARTÍK, L.; POKLUDA, J. Vliv teploty popouštění na nízkocyklovou únavu a cyklický creep nízkolegované ultrapevné oceli. KOVOVE MATERIALY-METALLIC MATERIALS, 1998, roč. 36, č. 2, 1 s. ISSN: 0023-432X.Detail
PONÍŽIL, P.; SAXL, I.; DRUCKMÜLLER, M.; POKLUDA, J. Comparison of Real and Simulated Polycrystalline Grain Structures. KOVOVE MATERIALY-METALLIC MATERIALS, 1998, vol. 36, no. 6, 1 p. ISSN: 0023-432X.Detail
PONÍŽIL, P.; SAXL, I.; SAXL, I.; POKLUDA, J. Srovnání skutečných a simulovaných zrnitých struktur. In 2nd International Colloquium on Materials Structure & Microm. Brno: VUT Brno, 1998. 1 s.Detail
ŠANDERA, P., HORNÍKOVÁ, J., POKLUDA, J. Effective Stress Intensity Factor of a Real-Like 3D Intergranular Crack Front. In ECF 12, Fracture from Defects. UK, Sheffield: Elsevier, 1998. 6 p. ISBN: 190153703.Detail
ŠANDERA, P., PONÍŽIL, P., POKLUDA, J. Simulation of 3D Intergranular Crack. In Materials Structure & Micromechanics of Fracture (MSMF-2). Brno: Vutium, 1998. 1 p. ISBN: 80-214-1181-3.Detail
HORNÍKOVÁ, J., ŠANDERA, P., POKLUDA, J. Stress Intensity Factor of 3D Branched Crack. In Materials Structure & Micromechanics of Fracture (MSMF-2). Brno: Vutium, 1998. 2 p. ISBN: 80-214-1181-3.Detail
ČERNÝ, M., ŠANDERA, P., POKLUDA, J. Ab Initio Modelling of the Theoretical Strength under Three-axial Tension. In Materials structure and micromechanics of fracture (MSMF-2). Brno: 1998.Detail
BARTÍK, L.; POKLUDA, J. Low-Cycle Fatigue and Cyclic Creep of Some UHSLA Steels. KOVOVE MATERIALY-METALLIC MATERIALS, 1998, vol. 36, no. 3-S, 1 p. ISSN: 0023-432X.Detail
1997
ŠANDERA, P., POKLUDA, J., WANG, L., ŠOB, M. Calculation of Theoretical Strength of Solids by Linear Muffin-tin Orbitals (LMTO) Method. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, vol. A234, no. 1, 7 p. ISSN: 0921-5093.Detail
ŠVEJCAR, J., POKLUDA, J., VĚCHET, S. Fatigue Behaviour of ADI; Some Specific Features. In High Cycle Fatigue of Structural Materials. 1. Pennsylvania USA: TMS USA, 1997. p. 427-444. ISBN: 0-87339-38.Detail
ŠANDERA, P., POKLUDA, J., PONÍŽIL, P. Three Dimensional Model of Intergranular Crack Development in the Process Zone. In Fractography 97. Košice: Institute of Materials Research SAV, 1997. 5 p. ISBN: 80-967814-X.Detail
1996
BARTÍK, L.; POKLUDA, J. Fatigue Properties of UHSLA Poldi Steel. In Junior EuroMat 96. Lausanne, Switzerland: Deutsche Gesellschaft für Materialkunde e. V., 1996. 2 p.Detail
ŠANDERA, P., POKLUDA, J. Interkrystalické větvení křehké trhliny ve Voronoiových mozaikách. KOVOVE MATERIALY-METALLIC MATERIALS, 1996, roč. 34, č. 4, 7 s. ISSN: 0023-432X.Detail
PONÍŽIL, P., POKLUDA, J., ŠANDERA, P. On the Inverse Relation between Fracture Toughness and Prior Grain Size in UHSLA Steeels. In Junior EuroMat 96. Lausanne, Switzerland: Deutsche Gesellschaft für Materialkunde e. V., 1996. 2 p. ISBN: 0.Detail
UNČOVSKÝ, M.; POKLUDA, J.; OHLÍDAL, M. Investigation of Fatigue Damage Development by Means of Laser Beam Scattering Method. KOVOVE MATERIALY-METALLIC MATERIALS, 1996, vol. 36, no. 3-S, 1 p. ISSN: 0023-432X.Detail
PONÍŽIL, P., POKLUDA, J., ŠANDERA, P. Inverzní vztah mezi lomovou houževnatostí a velikostí zrna UHSLA ocelí. In Junior Euromat 96. Lausanne, Swiss: Deutsche Gesellschaft fur Materialkunde, 1996. 2 s.Detail
ŠANDERA, P., PONÍŽIL, P., POKLUDA, J. Modelling Intergranular Crack Growth in 2D and 3D Voronoia Cells. In ECF11 Mechanisms and Mechanics of Damage and Failure. London, UK: Engineering Materials Advisory Services Ltd., 1996. 6 p. ISBN: 0-947817-9.Detail
1994
ŠANDERA, P., POKLUDA, J. Intrinsic Brittleness and Ductility of Cubic Crystals. In International Conference on Fractography. Bratislava: Polygrafia SAV, 1994. 5 p.Detail
ŠANDERA, P.; POKLUDA, J. Ideální pevnost kubických krystalů při trojosém tahu. KOVOVE MATERIALY-METALLIC MATERIALS, 1994, roč. 32, č. 4, 10 s. ISSN: 0023-432X.Detail
POKLUDA, J. Intergranular Crack Branching. In International Conference on Fractography. Bratislava: Polygrafia SAV, 1994. 9 p.Detail
POKLUDA, J. Mikromechanismus iniciace cyklického creepu v oblasti časované únavové pevnosti. Materiálové inžinierstvo, 1994, roč. 1, č. 1, 8 s. ISSN: 1335-0803.Detail
POKLUDA, J., KROUPA, F., OBDRŽÁLEK, L. Mechanické vlastnosti a struktura pevných látek. Brno: PC DIR, 1994.Detail
ŠANDERA, P., POKLUDA, J. Ideal Strength of Cubic Crystals under Triaxial Tension. 1994, vol. 32, no. 4, 10 p.Detail
1993
VÁLKA, L.; POKLUDA, J. K problematice vlivu středního napětí na základní únavové charakteristiky. KOVOVE MATERIALY-METALLIC MATERIALS, 1993, roč. 31, č. 3, s. 279-288. ISSN: 0023-432X.Detail
*) Citace se generují jednou za 24 hodin.