Přístupnostní navigace
E-přihláška
Vyhledávání Vyhledat Zavřít
Ing.
Ph.D.
FSI, ÚMTMB OMPM – odborný asistent
+420 54114 2871Miroslav.Hrstka1@vutbr.cz
Odeslat VUT zprávu
2026
SLABÝ, V.; BAJER, J.; MARCIÁN, P.; HRSTKA, M.; HADAŠ, Z. Novel metamaterial platform with piezoelectric sensors for self-sensing mechanical support. International Journal of Mechanical Sciences, 2026, vol. 314, iss. March, p. 1-15.
Článek Scopus
Hrstka, Kotoul, Profant, Aliabadi. Influence of initial misfit strains on small scale domain switching ahead of interface crack between piezoelectric layer and dielectric isotropic substrate. Procedia Structural Integrity. Elsevier BV, 2026. p. 471.
Článek - ostatní
PROFANT, T.; HRSTKA, M.; SLÁDEK, J.; SLÁDEK, V.; KOTOUL, M. Asymptotic solution for crack in orthotropic material and strain gradient elasticity. European journal of mechanics, A, Solids, 2026, vol. 119, iss. April, p. 1-23.
Článek WoS
2025
HRSTKA, M.; KOTOUL, M.; PROFANT, T.; KIANICOVÁ, M. Small-scale domain switching near sharp piezoelectric bi-material notches. INTERNATIONAL JOURNAL OF FRACTURE, 2025, vol. 250, iss. 1, p. 1-30. ISSN: 0376-9429.
ZIKMUND, P.; KOFLER, M.; NAVRÁTIL, J.; HRSTKA, M.; POLLÁK, J.; VAN KAMPEN, E. Multidisciplinary Design Optimization Framework for Morphing Wing using Metamaterials. In 2024 New Trends in Aviation Development (NTAD). Proceedings (New Trends in Aviation Development). IEEE, 2025. p. 236-241. ISBN: 979-8-3315-2774-7. ISSN: 2836-2764.
Stať ve sborníku v databázi WoS či Scopus
BAJER, J.; HRSTKA, M.; KHODAEI, Z.; ALIABADI, M.; HADAŠ, Z. Design of kinematic mechanism of morphing wing with functionally gradient metamaterial skin. In Engineering Materials, Structures, Systems and Methods for a More Sustainable Future. London: CRC Press, 2025. p. 928-933. ISBN: 9781003677895.
2024
HRSTKA, M.; BAJER, J.; HADAŠ, Z.; KHODAEI, Z.; ALIABADI, F.; KOTOUL, M. Modelling of leading edge morphing by using geometrically exact beam theory. In Engineering Mechanics 2024. Engineering Mechanics. 1. Milovy: Institute of Solid Mechanics, Mechatronics and Biomechanics, Faculty of Mechanical Engineering, Brno University of Technology, 2024. iss. 1, p. 134-137. ISBN: 978-80-214-6235-9. ISSN: 1805-8248.
Jan Bajer; Miroslav Hrstka; Zahra Sharif Khodaei; M.H. Aliabadi; Zdenek Hadas. Geometry Optimization of a Highly Flexible Gradient Metamaterial Structure Using a Differential Evolution Algorithm. In 2024 21st International Conference on Mechatronics - Mechatronika (ME). 21. Brno, Czech Republic: IEEE, 2024. p. 186-191. ISBN: 979-8-3503-9490-0.
2023
HRSTKA, M.; KOTOUL, M.; PROFANT, T. Analysis of effect of domain polarization switching near sharp piezoelectric bi-material notches. In 20th International Conference on Fracture and Damage Mechanics, DM 2022. AIP conference proceedings. AIP Conference Proceedings. Melville, NY, USA: American Institute of Physics Inc., 2023. p. 020004-1 (020004-17 p.)ISBN: 9780735445482. ISSN: 0094-243X.
BAJER, J.; KŠICA, F.; MARCIÁN, P.; HRSTKA, M.; NAVRÁTIL, J.; HADAŠ, Z. Concept of Autonomous Self-Sensing Metamaterial Structures for Future Aircraft. In 2023 IEEE 10th International Workshop on Metrology for AeroSpace (MetroAeroSpace). Milan, Italy: IEEE, 2023. p. 424-429. ISBN: 978-1-6654-5690-6.
2022
ŽÁK, S.; LASSNIG, A.; HRSTKA, M.; CORDILL, M. Buckling-induced delamination: Connection between mode-mixity and Dundurs parameters. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2022, vol. 122, iss. 12, p. 1-9. ISSN: 0167-8442.
2020
HADAŠ, Z.; MARCIÁN, P.; RUBEŠ, O.; HRSTKA, M. CONCEPT OF METAMATERIAL WITH PIEZOELECTRIC ELEMENTS FOR CYBER-PHYSICAL SYSTEM APPLICATIONS. In ENGINEERING MECHANICS 2020. Engineering Mechanics .... BRNO: BRNO UNIV TECHNOL, FAC MECHANICAL ENGINEERING, 2020. iss. 2020, p. 174-177. ISBN: 978-80-214-5896-3. ISSN: 1805-8256.
ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T.; HRSTKA, M. Crack kinking out of interface of two orthotropic materials under combined thermal/mechanical loading. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, vol. 105, iss. 1, p. 1-18. ISSN: 0167-8442.
2019
PROFANT, T.; HRSTKA, M.; KLUSÁK, J. An asymptotic analysis of crack initiation from an interfacial zone surrounding the circular inclusion. Composite structures, 2019, vol. 208, iss. 1, p. 479-497. ISSN: 0263-8223.
HRSTKA, M.; KOTOUL, M.; PROFANT, T. Notch Tip Singularities of Elastic Piezoelectric Bi-materials. In 9th International Conference Materials Structure & Micromechanics of Fracture (MSMF9). Procedia Structural Integrity. Procedia Structural Integrity, 2019. iss. special, p. 419-424. ISSN: 2452-3216.
VOJTEK, T.; HRSTKA, M. How to get a correct estimate of the plastic zone size for shear- mode fatigue cracks?. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2019, vol. 104, iss. 1, p. 1-16. ISSN: 0167-8442.
HRSTKA, M.; PROFANT, T.; KOTOUL, M. Electro-mechanical singularities of piezoelectric bi-material notches and cracks. Engineering fracture mechanics, 2019, vol. 216, iss. 1, p. 1-23. ISSN: 0013-7944.
PROFANT, T.; HRSTKA, M.; KLUSÁK, J. Microcrack interaction with circular inclusion and interfacial zone. Fracture and structural integrity, 2019, vol. 13, iss. 48, p. 503-512. ISSN: 1971-8993.
2018
HRSTKA, M.; ŽÁK, S.; VOJTEK, T. Large plastic zones and extensive influence of notch under near-threshold mode II and mode III loading of fatigue cracks. Procedia Structural Integrity, 2018, vol. 13, iss. special, p. 1123-1128. ISSN: 2452-3216.
2017
PROFANT, T.; HRSTKA, M.; KLUSÁK, J.; KERŠNER, Z. On the Energy Release Rate of the Crack Emanating from the Inclusion Interphase. In ENGINEERING MECHANICS 2017. Engineering Mechanics. Dolejškova 5, Prague 8, 182 00, Czech Republic: ACAD SCI CZECH REPUBLIC, INST THERMOMECHANICS, 2017. iss. 1, p. 806-809. ISBN: 978-80-214-5497-2. ISSN: 1805-8248.
2015
SVATOŠ, V.; NEUŽIL, P.; HRSTKA, M.; HUBÁLEK, J. Effective simulation approach for study of carbon nanotube mechanical properties. In Proceedings of abstracts. Ostrava: Tanger, 2015. p. 111-115. ISBN: 978-80-87294-59-8.
2014
KREPL, O.; KLUSÁK, J.; PROFANT, T.; HRSTKA, M. Stress distribution and fracture parameters of orthotropic bi-material notches determination. 2014.
Abstrakt
PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; KOTOUL, M.; HRSTKA, M.; MARCIÁN, P. An effect of the first non-singular term of the Williams asymptotic expansion to the stability of the bi-material orthotropic notch. In Materials Structure & Micromechanics of Fracture VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. iss. 2014, p. 745-748. ISSN: 1013-9826.
KLUSÁK, J.; HRSTKA, M.; PROFANT, T.; KREPL, O.; ŠEVEČEK, O.; KOTOUL, M. The influence of the first non-singular stress terms on crack initiation direction in an orthotropic bi-material plate. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2014, vol. 71, iss. 2014, p. 67-75. ISSN: 0167-8442.
MARCIÁN, P.; VALÁŠEK, J.; HRSTKA, M.; MAJER, Z.; ŠEVEČEK, O.; PROFANT, T.; DLOUHÝ, I.; FLORIAN, Z. Computational Modeling of Porous Ceramics with Bioactive Layer. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. iss. 2014, p. 378-381. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.
HRSTKA, M.; PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; KOTOUL, M. A Stability Criterion of an Orthotropic Bi-Material Notch Based on the Strain Energy Density. In Engineering Mechanics 2014. 1. Svratka: BUT, 2014. p. 232-235. ISBN: 978-80-214-4871-1.
2013
PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; HRSTKA, M.; KOTOUL, M. An energetic criterion for a micro-crack of finite length initiated in orthotropic bi-material notches. Engineering fracture mechanics, 2013, vol. 110, iss. 2013, p. 396-409. ISSN: 0013-7944.
Článek recenzovaný mimo WoS a Scopus
*) Citace se generují jednou za 24 hodin.