Publikační výsledky

• 2025

  AARNIOVUORI, L.; TIIHONEN, M.; AHMED, S.; KÄRKKÄINEN, H.; BÁRTA, J.; VÍTEK, O. Segregation of Additional High Frequency Harmonic Losses Created by PWM Supply. In 2024 IEEE 65th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON). 2025. 6 p. ISBN: 979-8-3503-6577-1.
  Detail

  AHMED, S.; AARNIOVUORI, L.; NERG, J.; BÁRTA, J.; VÍTEK, O. Emerging Trends in High-Speed Induction Machines and Converter Technologies for Industrial Applications. In Conference proceedings. IEEE, 2025. 6 p. ISBN: 979-8-3503-7659-3.
  Detail

• 2024

  SIZONENKO, V.; VÍTEK, O.; KLÍMA, P.; BIANCHI, N. Design and Optimization of PMaSynRM with Short-circuit Fault Tolerance. In 2024 IEEE International Conference on Electrical Machines (ICEM). Turin, Italy: IEEE, 2024. 7 p. ISBN: 979-8-3503-7060-7.
  Detail

  BÁRTA, J.; TOMAN, M.; LOŠÁK, P.; AARNIOVUORI, L.; VÍTEK, O. Line-Start Permanent Magnet Machines for Low-Power Applications. In 2024 International Conference on Electrical Machines (ICEM). New York: IEEE, 2024. 7 p. ISBN: 979-8-3503-7060-7.
  Detail

  MERGL, V.; PROCHÁZKA, P.; NAGY, M.; ZEIZINGER, L.; VÍTEK, O.; GULAN, L. Power Curve Determination and Electrification of Powertrain System of Harvester Crane Swinging. Croatian Journal of Forest Engineering, 2024, vol. 45, no. 2, p. 293-304. ISSN: 1845-5719.
  Detail

• 2023

  SIZONENKO, V.; VÍTEK, O.; HUTÁK, P. Comparison of Demagnetization Behavior of Radial and Halbach Array PMs in Fault-Tolerant Synchronous Machines Operating with Open Phases. In 2023 IEEE 14th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED). Chania, Greece: IEEE, 2023. 7 p. ISBN: 979-8-3503-2077-0.
  Detail

• 2022

  KLÍMA, P.; VÍTEK, O. Influence of the magnet shape on the rotor eddy-current losses in the outer rotor permanent magnet synchronous motor. In PROCEEDINGS I OF THE 28TH STUDENT EEICT 2022 GENERAL PAPERS. 1. Brno: Brno University of Technology, Faculty of Electrical Engineering and Communication, 2022. p. 326-330. ISBN: 978-80-214-6029-4.
  Detail

  PRIBULLA, D.; VÍTEK, O. Design of a High-speed Solid-rotor Asynchronous Generator for an Expansion Turbine. In Proceedings I of the 28 th Conference STUDENT EEICT 2022 General Papers. 1. Brno: Brno University of Technology, Faculty of Electrical Engineering and Communication, 2022. p. 316-320. ISBN: 978-80-214-6029-4.
  Detail

  PRIBULLA, D.; VÍTEK, O. Metódy výpočtu vírivých strát v permanentných magnetoch synchrónnych strojov. Elektrorevue - Internetový časopis (http://www.elektrorevue.cz), 2022, roč. 24, č. 1, s. 21-28. ISSN: 1213-1539.
  Detail

  ZEMÁNEK, T.; PROCHÁZKA, P.; PAZDERA, I.; MERGL, V.; NERUDA, J.; VÍTEK, O.; ULRICH, R.; STANĚK, L. Operating Characteristics of a Timber Trailer with a Hybrid Drive. Forests, 2022, vol. 13, no. 8, p. 1-15. ISSN: 1999-4907.
  Detail

  SIZONENKO, V.; VÍTEK, O. Preliminary Design and Comparison of 5 Phase and 6 Phase Fault Tolerant Outer Rotor Permanent Magnet Synchronous Machines with Different Electrical Steel. In 2022 IEEE 20th International Power Electronics and Motion Control Conference (PEMC). Brasov, Romania: IEEE, 2022. p. 390-395. ISBN: 978-1-6654-9681-0.
  Detail

  SIZONENKO, V.; VÍTEK, O. Literature Overview of Fault Tolerant Electrical Machines. In Proceedings I of the 28th student EEICT 2022 General papers. 1. Brno: Brno University of Technology, Faculty of Electrical Engineering and Communication, 2022. p. 311-315. ISBN: 978-80-214-6029-4.
  Detail

  LOLOVÁ, I.; BÁRTA, J.; BRAMERDORFER, G.; BÍLEK, V.; VÍTEK, O. The Optimization of Single-Phase Line-Start Permanent Magnet Synchronous Motor for Household Applications. In 2022 International Conference on Electrical Machines (ICEM). Valencie, Španělsko: IEEE, 2022. p. 774-779. ISBN: 978-1-6654-1432-6.
  Detail

  KLÍMA, P.; RÚRA, D.; VÍTEK, O. Analysis and Reduction of Eddy Current Losses in High-Speed Solid Outer Rotor Induction Machine. In 2022 International Conference on Electrical Machines (ICEM). Proceedings on International Conference on Electrical Machines. Valencie, Španělsko: Institute of Electrical and Electronics Engineers Inc., 2022. p. 1022-1026. ISBN: 978-1-6654-1432-6. ISSN: 2381-4802.
  Detail

• 2021

  BÁRTA, J.; KNEBL, L.; BRAMERDORFER, G.; LOLOVÁ, I.; SILBER, S.; VÍTEK, O. Topology Optimization of Rotor Bars Geometry and Arrangement for a Line-Start Permanent Magnet Synchronous Machine. IEEE Access, 2021, vol. 9, no. 1, p. 115192-115204. ISSN: 2169-3536.
  Detail

  KNEBL, L.; BÁRTA, J.; ONDRŮŠEK, Č.; VÍTEK, O.; BRAMERDORFER, G. Multi-objective Optimization of a Line-start Synchronous Machine Using a Self-organizing Algorithm. IEEE TRANSACTIONS ON MAGNETICS, 2021, vol. 57, no. 6, p. 1-4. ISSN: 0018-9464.
  Detail

• 2020

  KNEBL, L.; BÁRTA, J.; VÍTEK, O.; ONDRŮŠEK, Č. High-torque Ferrite Assisted Reluctance Machine Winding Comparison. In USB Proceedings2020 International Conference onElectrical Machines (ICEM). New York: IEEE, 2020. p. 1567-1572. ISBN: 978-1-7281-9945-0.
  Detail

  BÁRTA, J.; KNEBL, L.; VÍTEK, O.; BRAMERDORFER, G.; SILBER, S. Optimization of Line-Start Synchronous Reluctance Machine Amended From an Induction Machine. In USB Proceedings2020 International Conference onElectrical Machines (ICEM). New York: IEEE, 2020. p. 272-277. ISBN: 978-1-7281-9945-0.
  Detail

• 2019

  MACH, M.; VÍTEK, O. Vliv magnetického obvodu na přesnost resolveru. Elektrorevue - Internetový časopis (http://www.elektrorevue.cz), 2019, roč. 21, č. 4, s. 107-113. ISSN: 1213-1539.
  Detail

• 2018

  KLÍMA, J.; NERG, J.; BÁRTA, J.; VÍTEK, O. The impact of the rotor slit number on the behavior of high-speed induction motor. Przeglad Elektrotechniczny, 2018, vol. 2018, no. 5, p. 7-13. ISSN: 0033-2097.
  Detail

• 2017

  CHERNYAVSKA, I.; VÍTEK, O. Analysis of Air-gap Eccentricity in Inverter Fed Induction Motor by Means of Motor Current Signature Analysis and Stray Flux of Motor. In 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED). 1. Tinos, Greece: Michigan State University, 2017. p. 72-76. ISBN: 978-1-5090-0409-6.
  Detail

  PROCHÁZKA, P.; PAZDERA, I.; VÍTEK, O.; HUTÁK, P. Forwarder Trailer with Auxiliary Electric Drive Unit. ECS Transactions, 2017, no. 1, p. 1-6. ISSN: 1938-5862.
  Detail

  PROCHÁZKA, P.; PAZDERA, I.; VÍTEK, O.; HUTÁK, P. Electric Drive Unit for Forwarder Trailer. In Conference proceeding ABAF. 2017. p. 1-3. ISBN: 978-80-214-5529-0.
  Detail

• 2016

  ISHKOVA, I.; VÍTEK, O. Detection and classification of faults in induction motor by means of motor current signature analysis and stray flux monitoring. Przeglad Elektrotechniczny, 2016, vol. 92, no. 4/2016, p. 166-170. ISSN: 0033-2097.
  Detail

  ISHKOVA, I.; VÍTEK, O. Analysis of Induction Motor Faults by Means of Monitoring the Current and Magnetic Flux Density Spectrums. In Speedam 2016 - Proceedings. DIETI - Engimeering School - University of Naples ''Federico II'', 2016. p. 605-610. ISBN: 978-1-5090-4181-7.
  Detail

  KLÍMA, J.; VÍTEK, O. The influence of the rotor slits on the performance of high-speed solid-rotor induction machine. In 17th Mechatronika 2016. first edition. Institute of Electrical and Electronics Engineers Inc.: 2016. p. 206-210. ISBN: 978-80-01-05882-4.
  Detail

  CHERNYAVSKA, I.; VÍTEK, O. Analysis of Broken Rotor Bar Fault in a Squirrel-Cage Induction Motor by Means of Stator Current and Stray Flux Measurement. In USB Proceedings 2016 IEEE International Power Electronics and Motion Control Conference (PEMC). 1. Varna, Bulgaria: The Institute of Electrical and Electronics Engineers, 2016. p. 532-537. ISBN: 978-1-5090-1797-3.
  Detail

• 2015

  KLÍMA, J.; VÍTEK, O.; MACH, M. Analysis of high speed squirrel cage induction motors. In 2015 IEEE 15th International Conference on Environment and Electrical Engineering. 1. 2015. p. 1302-1305. ISBN: 978-1-4799-7992-9.
  Detail

  ISHKOVA, I.; VÍTEK, O. Diagnosis of eccentricity and broken rotor bar related faults of induction motor by means of motor current signature analysis. In Proceedings of the 2015 16th International Scientific Conference on Electric Power Engineering (EPE). první. Ostrava, Czech Republic: VSB – Technical University of Ostrava, Faculty of Electrical Engineering and Computer Science, 2015. p. 682-686. ISBN: 978-1-4673-6787-5.
  Detail

  PROCHÁZKA, P.; PAZDERA, I.; VÍTEK, O. Development and experience with ICT based education in sustainably energy. In 2015 IEEE International Conference on Industrial Technology, ICIT 2015. 2015. p. 3264-3269. ISBN: 9781479978014.
  Detail

• 2014

  KLÍMA, J.; VÍTEK, O. Analysis of high-speed induction motor. In 16th Mechatronika 2014. first edition. 2014. p. 1-7. ISBN: 978-80-214-4817-9.
  Detail

• 2013

  HÁJEK, V.; VÍTEK, O.; MACH, M. Brushless Alternator in Automotive Applications. In 2013 Eighth International Conference and Exhibition on Ecological Vehicles and Renewable Energies. 2013. p. 1-4. ISBN: 978-1-4673-5270-3.
  Detail

  HÁJEK, V.; KUCHAŘ, L.; MACH, M.; VÍTEK, O. Small Electric Motors with Integrated Electronic Unit. In 17th International Conference on Electrical Drives and Power Electronics 6th joint Croatian-Slovak Conference EDPE 2013. 2013. p. 200-204. ISBN: 978-953-56937-8-9.
  Detail

• 2012

  JANDA, M.; VÍTEK, O.; HÁJEK, V. Noise of Induction Machines. In INDUCTION MOTORS - MODELLING AND CONTROL. 1. 2012. p. 207-224. ISBN: 978-953-51-0843-6.
  Detail

• 2011

  VÍTEK, O.; JANDA, M.; HÁJEK, V.; BAUER, P. Detection of Eccentricity and Bearings Fault Using Stray Flux Monitoring. In Proceedings of the 8th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives. Bologna, IT: IEEE, 2011. p. 456-461. ISBN: 978-1-4244-9302-9.
  Detail

• 2010

  HÁJEK, V.; KUCHYŇKOVÁ, H.; VÍTEK, O. NEW TYPE OF AXIAL STARTER. Zeszyty Problemowe - Maszyny Elektryczne, 2010, vol. 2010, no. 87, p. 59-62. ISSN: 0239-3646.
  Detail

  HUZLÍK, R.; HÁJEK, V.; VÍTEK, O.; BAUER, P. Virtual laboratory of DC machine and Automotive electrical engineering. In Proceedings of EPE- PEMC 2010. Skopje, Republic of Macedonia: 2010. p. S5-19 (S5-23 p.)ISBN: 978-1-4244-7854-5.
  Detail

  VÍTEK, O.; JANDA, M.; HÁJEK, V. Effects of Eccentricity on External Magnetic Field of Induction Machine. In 15th IEEE Mediterranean Electrotechnical Conference. Valletta, Malta: IEEE, 345 E 47TH ST, NEW YORK, NY 10017 USA, 2010. p. 939-943. ISBN: 978-1-4244-5794-6.
  Detail

• 2009

  VÍTEK, O. Induction machine diagnosis using stator current and magnetic field analysis. Zeszyty Problemowe - Maszyny Elektryczne, 2009, vol. 2009, no. 82, p. 263-264. ISSN: 0239-3646.
  Detail

• 2008

  VÍTEK, O.; HÁJEK, V.; MELICHAR, P.; DUROŇ, J. Design and measurement of the low voltage EC-motor. Prace Naukowe Instytutu Maszin, Napedów i Pomiarów Elektrycznych Politechniki Wroclawskiej, 2008, vol. 1, no. 62, p. 216-221. ISSN: 1733-0718.
  Detail

  VÍTEK, O.; HÁJEK, V. Design and analysis of an automotive alternator. Prace Naukowe Instytutu Maszin, Napedów i Pomiarów Elektrycznych Politechniki Wroclawskiej, 2008, vol. 1, no. 62, p. 222-226. ISSN: 1733-0718.
  Detail

• 2007

  VÍTEK, O.; HÁJEK, V. DESIGN AND OPTIMIZATION OF THE BRUSHLESS ALTERNATOR. In XV. International Symposium on Electric Machinery in Prague ISEM 2007. Praha: Czech Technical University in Prague, 2007. p. 172-176. ISBN: 978-80-01-03807-9.
  Detail

  VÍTEK, O.; HÁJEK, V. DETECTION OF THE DYNAMIC ROTOR ECCENTRICITY BASED ON THE EXTERNAL MAGNETIC FIELD MEASUREMENT. In XLIII International Symposium on Electrical Machines. Poznan, Poland: PTETiS Publishers, 2007. p. 63-64. ISBN: 978-83-921340-3-9.
  Detail

  DUROŇ, J.; VÍTEK, O.; MELICHAR, P. Auxiliary Brushless Drive for Motor Vehicles. In 16th International Conference on Electrical Drives and Power Electronics. 1. Košice, Slovak Republic: Slovenská elektrotechnická spoločnosť, pobočka pri Fakulte elektrotechniky a informatiky Technickej univerzity v Košiciach, Slovenská republika, 2007. p. 1-4. ISBN: 978-80-8073-868-6.
  Detail

  DUROŇ, J. AUXILIARY BRUSHLESS DRIVE FOR MOTOR VEHICLES. In XV. International Symposium on Electric Machinery in Prague ISEM 2007. Praha: CVUT Praha, 2007. p. 29-34. ISBN: 978-80-01-03807-9.
  Detail

  VÍTEK, O.; HÁJEK, V. Analysis, Design and Optimization of the Automotive Slipringless Alternator. In 16th International Conference on Electrical Drives and Power Electronics. Košice: TULIP reklama, 2007. p. 1-4. ISBN: 978-80-8073-868-6.
  Detail

  VÍTEK, O.; HÁJEK, V. HIGH SPEED INDUCTION MACHINES FOR SAWMILL APPLICATIONS. In International Conference on Low Voltage Electrical Machines. Brno: Brno University of Technology, 2007. p. 106-107. ISBN: 978-80-214-3560-5.
  Detail

  VÍTEK, O.; HÁJEK, V. Detection of the dynamic rotor eccentricity based on the external magnetic field analysis. Prace Naukowe Politechniki Śląskiej. Elektryka, 2007, vol. 2007, no. 203, p. 63-70. ISSN: 1897-8827.
  Detail

• 2006

  Ondrej VITEK, Vitezslav HAJEK. Magnetic Circuit Asymmetry Determination by External Magnetic Field of Induction Motor Analysis. In XLII International Symposium on Electrical Machines SME 2006. 2006. 4 p.
  Detail

  Ondřej Vítek, Vítězslav Hájek. Examination of the rotor eccentricity of the induction motor. In International Conference on Low Voltage Electrical Machines. Brno University of Technology, 2006. 4 p.
  Detail

• 2005

  Ondřej VÍTEK, Vítězslav HÁJEK. Induction machine analysis provided by magnetic field measurement. In XLI Internacional Symposium on Electrical Machines. Technical University of Opole, Poland, 2005. 4 p. ISBN: 83-88492-74-8.
  Detail

  VÍTEK Ondřej, HÁJEK Vítězslav. Rotor eccentricity determination by measurement of magnetic field. In XIII. International Symposium On Electric Machinery In Prague ISEM 2005. Czech Technical University in Prague, 2005. 4 p. ISBN: 80-01-03328-7.
  Detail

  SIKORA, L., VÍTEK, O., HÁJEK, V. Brushless alternators. In SME 2005 - XLI MIEDZYNARODOWE SYMPOZJUM MASZYN ELEKTRYCZNYCH. Opole - Jarnołtówek, Poland: Polytechnika Opolska, 2005. 3 p. ISBN: 83-88492-74-8.
  Detail

  Ondřej Vítek, Vítězslav Hájek. Úvod do diagnostiky asynchronních motorů. In EPVE 2005 Elektrické pohony a výkonová elektronika. Vysoké učení technické v Brně, 2005. 3 s. ISBN: 80-214-3052-4.
  Detail

  Ondřej Vítek, Vítězslav Hájek. Induction Motor Condition Monitoring by Leakage Magnetic Field Analysis. In Low Voltage Electrical Machines. Department of Power Electrical and Electronic Engineering, 2005. 4 p. ISBN: 80-214-3047-8.
  Detail

• 2004

  VÍTEK, O., HÁJEK, V. MEASUREMENT OF EXTERNAL MAGNETIC FIELD AROUND ELECTRICAL MACHINES. In XII. International Symposium on Electric Machinery in Prague ISEM 2004. Czech Technical University in Prague, 2004. 6 p. ISBN: 80-01-03061-X.
  Detail

  VÍTEK, O. EXTERNAL MAGNETIC FIELD ANALYSIS OF INDUCTION MOTOR. In Student EEICT 2004, Volume 3. Brno: 2004. 4 p. ISBN: 80-214-2636-5.
  Detail

  VÍTEK, O., HÁJEK, V. PRACTICAL MEASUREMENT OF MAGNETIC FIELD AROUND ELECTRICAL APPLIANCES. In Low Voltage Eletrical Machines. Department of Power Electrical and Electronic Engineering, Faculty of Electrical Engineering and Communication, Brno University of Technology, 2004. 4 p. ISBN: 80-214-2632-2.
  Detail

  VÍTEK, O., HÁJEK, V. TIME BEHAVIOURS MEASUREMENT OF EXTERNAL MAGNETIC FIELD OF INDUCTION MOTOR. In EPVE 2004 Elektrické pohony a výkonová elektronika. Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, Ústav výkonové elektrotechniky a elektroniky, 2004. 4 p. ISBN: 80-214-2766-3.
  Detail

• 2003

  VÍTEK, O., HÁJEK, V. External magnetic field analysis of electrical machines. In Low Voltage Electrical Machines. Brno: 2003. 6 p. ISBN: 80-214-2308-0.
  Detail

*) Citace se generují jednou za 24 hodin.