Publikace

• 2025

  ZIKMUND, P.; KOFLER, M.; NAVRÁTIL, J.; HRSTKA, M.; POLLÁK, J.; VAN KAMPEN, E. Multidisciplinary Design Optimization Framework for Morphing Wing using Metamaterials. In 2024 New Trends in Aviation Development (NTAD). 2024 New Trends in Aviation Development (NTAD). IEEE, 2025. s. 236-241. ISBN: 979-8-3315-2774-7. ISSN: 2836-2764.
  Detail | WWW | Plný text v Digitální knihovně

• 2024

  Jan Bajer; Miroslav Hrstka; Zahra Sharif Khodaei; M.H. Aliabadi; Zdenek Hadas. Geometry Optimization of a Highly Flexible Gradient Metamaterial Structure Using a Differential Evolution Algorithm. In 2024 21st International Conference on Mechatronics - Mechatronika (ME). 21. Brno, Czech Republic: IEEE, 2024. s. 186-191. ISBN: 979-8-3503-9490-0.
  Detail | WWW

  HRSTKA, M.; BAJER, J.; HADAŠ, Z.; KHODAEI, Z.; ALIABADI, F.; KOTOUL, M. Modelling of leading edge morphing by using geometrically exact beam theory. In Engineering Mechanics 2024. Engineering Mechanics .... 1. Milovy: Institute of Solid Mechanics, Mechatronics and Biomechanics, Faculty of Mechanical Engineering, Brno University of Technology, 2024. s. 134-137. ISBN: 978-80-214-6235-9. ISSN: 1805-8248.
  Detail | WWW

• 2023

  HRSTKA, M.; KOTOUL, M.; PROFANT, T. Analysis of effect of domain polarization switching near sharp piezoelectric bi-material notches. In 20th International Conference on Fracture and Damage Mechanics, DM 2022. AIP conference proceedings. AIP Conference Proceedings. Melville, NY, USA: American Institute of Physics Inc., 2023. s. 020004-1 (020004-17 s.)ISBN: 9780735445482. ISSN: 0094-243X.
  Detail | WWW

  BAJER, J.; KŠICA, F.; MARCIÁN, P.; HRSTKA, M.; NAVRÁTIL, J.; HADAŠ, Z. Concept of Autonomous Self-Sensing Metamaterial Structures for Future Aircraft. In 2023 IEEE 10th International Workshop on Metrology for AeroSpace (MetroAeroSpace). Milan, Italy: IEEE, 2023. s. 424-429. ISBN: 978-1-6654-5690-6.
  Detail | WWW

• 2022

  ŽÁK, S.; LASSNIG, A.; HRSTKA, M.; CORDILL, M. Buckling-induced delamination: Connection between mode-mixity and Dundurs parameters. Theoretical and Applied Fracture Mechanics, 2022, roč. 122, č. 12, s. 1-9. ISSN: 0167-8442.
  Detail | WWW | Plný text v Digitální knihovně

• 2020

  HADAŠ, Z.; MARCIÁN, P.; RUBEŠ, O.; HRSTKA, M. CONCEPT OF METAMATERIAL WITH PIEZOELECTRIC ELEMENTS FOR CYBER-PHYSICAL SYSTEM APPLICATIONS. In ENGINEERING MECHANICS 2020. Engineering Mechanics .... BRNO: BRNO UNIV TECHNOL, FAC MECHANICAL ENGINEERING, 2020. s. 174-177. ISBN: 978-80-214-5896-3. ISSN: 1805-8256.
  Detail | WWW

  ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T.; HRSTKA, M. Crack kinking out of interface of two orthotropic materials under combined thermal/mechanical loading. Theoretical and Applied Fracture Mechanics, 2020, roč. 105, č. 1, s. 1-18. ISSN: 0167-8442.
  Detail | WWW

• 2019

  HRSTKA, M.; PROFANT, T.; KOTOUL, M. Electro-mechanical singularities of piezoelectric bi-material notches and cracks. Engineering Fracture Mechanics, 2019, roč. 216, č. 1, s. 1-23. ISSN: 0013-7944.
  Detail | WWW

  PROFANT, T.; HRSTKA, M.; KLUSÁK, J. An asymptotic analysis of crack initiation from an interfacial zone surrounding the circular inclusion. COMPOSITE STRUCTURES, 2019, roč. 208, č. 1, s. 479-497. ISSN: 0263-8223.
  Detail | WWW

  PROFANT, T.; HRSTKA, M.; KLUSÁK, J. Microcrack interaction with circular inclusion and interfacial zone. Frattura ed Integrita Strutturale, 2019, roč. 13, č. 48, s. 503-512. ISSN: 1971-8993.
  Detail | WWW | Plný text v Digitální knihovně

  VOJTEK, T.; HRSTKA, M. How to get a correct estimate of the plastic zone size for shear- mode fatigue cracks?. Theoretical and Applied Fracture Mechanics, 2019, roč. 104, č. 1, s. 1-16. ISSN: 0167-8442.
  Detail | WWW

  HRSTKA, M.; KOTOUL, M.; PROFANT, T. Notch Tip Singularities of Elastic Piezoelectric Bi-materials. In 9th International Conference Materials Structure & Micromechanics of Fracture (MSMF9). Procedia Structural Integrity. Procedia Structural Integrity, 2019. s. 419-424. ISSN: 2452-3216.
  Detail | WWW

• 2018

  HRSTKA, M.; ŽÁK, S.; VOJTEK, T. Large plastic zones and extensive influence of notch under near-threshold mode II and mode III loading of fatigue cracks. Procedia Structural Integrity, 2018, roč. 13, č. special, s. 1123-1128. ISSN: 2452-3216.
  Detail

• 2017

  PROFANT, T.; HRSTKA, M.; KLUSÁK, J.; KERŠNER, Z. On the Energy Release Rate of the Crack Emanating from the Inclusion Interphase. In ENGINEERING MECHANICS 2017. Engineering mechanics 2014. Dolejškova 5, Prague 8, 182 00, Czech Republic: ACAD SCI CZECH REPUBLIC, INST THERMOMECHANICS, 2017. s. 806-809. ISBN: 978-80-214-5497-2. ISSN: 1805-8248.
  Detail | WWW

• 2015

  SVATOŠ, V.; NEUŽIL, P.; HRSTKA, M.; HUBÁLEK, J. Effective simulation approach for study of carbon nanotube mechanical properties. In Proceedings of abstracts. Ostrava: Tanger, 2015. s. 111-115. ISBN: 978-80-87294-59-8.
  Detail | WWW

• 2014

  KLUSÁK, J.; HRSTKA, M.; PROFANT, T.; KREPL, O.; ŠEVEČEK, O.; KOTOUL, M. The influence of the first non-singular stress terms on crack initiation direction in an orthotropic bi-material plate. Theoretical and Applied Fracture Mechanics, 2014, roč. 71, č. 2014, s. 67-75. ISSN: 0167-8442.
  Detail

  PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; KOTOUL, M.; HRSTKA, M.; MARCIÁN, P. An effect of the first non-singular term of the Williams asymptotic expansion to the stability of the bi- material orthotropic notch. In Materials Structure & Micromechanics of Fracture VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. s. 745-748. ISSN: 1013-9826.
  Detail

  MARCIÁN, P.; VALÁŠEK, J.; HRSTKA, M.; MAJER, Z.; ŠEVEČEK, O.; PROFANT, T.; DLOUHÝ, I.; FLORIAN, Z. Computational Modeling of Porous Ceramics with Bioactive Layer. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. s. 378-381. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.
  Detail

  HRSTKA, M.; PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; KOTOUL, M. A Stability Criterion of an Orthotropic Bi-Material Notch Based on the Strain Energy Density. In Engineering Mechanics 2014. 1. Svratka: BUT, 2014. s. 232-235. ISBN: 978-80-214-4871-1.
  Detail

  KREPL, O.; KLUSÁK, J.; PROFANT, T.; HRSTKA, M. Stress distribution and fracture parameters of orthotropic bi-material notches determination. 2014.
  Detail

• 2013

  PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; HRSTKA, M.; KOTOUL, M. An energetic criterion for a micro-crack of finite length initiated in orthotropic bi- material notches. Engineering Fracture Mechanics, 2013, roč. 110, č. 2013, s. 396-409. ISSN: 0013- 7944.
  Detail

*) Citace publikací se generují jednou za 24 hodin.