Detail publikačního výsledku

Test of the tensile load capacity of a timber structure joint with an inserted nail plate

SCHMID, P.; DANĚK, P.; ROZSYPALOVÁ, I.; PLAČEK, V.

Originální název

Test of the tensile load capacity of a timber structure joint with an inserted nail plate

Anglický název

Test of the tensile load capacity of a timber structure joint with an inserted nail plate

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

The aim of this paper was to determine the axial tensile load capacity of timber structure elements with inserted metal plates with welded nails. The tests were performed on three specimens in the laboratory of the AdMaS centre of the Faculty of Civil Engineering, Brno University of Technology. The tensile force was applied on the specimen by increasing the force up to the specimen failure. The inductive displacement transducers continuously measured the displacement of the inserted joint plates with regard to timber prisms. The tensile load-bearing capacity of the tested joint was determined at 205.0 kN. Due to the advantages, the tested joints with inserted nail plates seem to be appropriate for joining suitable timber elements

Anglický abstrakt

The aim of this paper was to determine the axial tensile load capacity of timber structure elements with inserted metal plates with welded nails. The tests were performed on three specimens in the laboratory of the AdMaS centre of the Faculty of Civil Engineering, Brno University of Technology. The tensile force was applied on the specimen by increasing the force up to the specimen failure. The inductive displacement transducers continuously measured the displacement of the inserted joint plates with regard to timber prisms. The tensile load-bearing capacity of the tested joint was determined at 205.0 kN. Due to the advantages, the tested joints with inserted nail plates seem to be appropriate for joining suitable timber elements

Klíčová slova

Test of the tensile load, timber structure

Klíčová slova v angličtině

Test of the tensile load, timber structure

Autoři

SCHMID, P.; DANĚK, P.; ROZSYPALOVÁ, I.; PLAČEK, V.

Rok RIV

2020

Vydáno

29.05.2019

Nakladatel

IOP Publishing

Místo

Bristol

Kniha

IOP Conference Series: Materials Science and Engineering

ISSN

1757-8981

Periodikum

IOP Conference Series: Materials Science and Engineering

Svazek

549

Číslo

1

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1

Strany do

6

Strany počet

6

URL

https://iopscience.iop.org/article/10.1088/1757-899X/549/1/012035/pdf

BibTex

@inproceedings{BUT157353,
  author="Pavel {Schmid} and Petr {Daněk} and Iva {Čairović} and Vladimír {Plaček}",
  title="Test of the tensile load capacity of a timber structure joint with an inserted nail plate",
  booktitle="IOP Conference Series: Materials Science and Engineering",
  year="2019",
  journal="IOP Conference Series: Materials Science and Engineering",
  volume="549",
  number="1",
  pages="1--6",
  publisher="IOP Publishing",
  address="Bristol",
  doi="10.1088/1757-899X/549/1/012035",
  issn="1757-8981",
  url="https://iopscience.iop.org/article/10.1088/1757-899X/549/1/012035/pdf"
}

Dokumenty

Schmid_2019_IOP_Conf._Ser.__Mater._Sci._Eng._549_012035