Publication result detail

Test of the tensile load capacity of a timber structure joint with an inserted nail plate

SCHMID, P.; DANĚK, P.; ROZSYPALOVÁ, I.; PLAČEK, V.

Original Title

Test of the tensile load capacity of a timber structure joint with an inserted nail plate

English Title

Test of the tensile load capacity of a timber structure joint with an inserted nail plate

Type

Paper in proceedings (conference paper)

Original Abstract

The aim of this paper was to determine the axial tensile load capacity of timber structure elements with inserted metal plates with welded nails. The tests were performed on three specimens in the laboratory of the AdMaS centre of the Faculty of Civil Engineering, Brno University of Technology. The tensile force was applied on the specimen by increasing the force up to the specimen failure. The inductive displacement transducers continuously measured the displacement of the inserted joint plates with regard to timber prisms. The tensile load-bearing capacity of the tested joint was determined at 205.0 kN. Due to the advantages, the tested joints with inserted nail plates seem to be appropriate for joining suitable timber elements

English abstract

The aim of this paper was to determine the axial tensile load capacity of timber structure elements with inserted metal plates with welded nails. The tests were performed on three specimens in the laboratory of the AdMaS centre of the Faculty of Civil Engineering, Brno University of Technology. The tensile force was applied on the specimen by increasing the force up to the specimen failure. The inductive displacement transducers continuously measured the displacement of the inserted joint plates with regard to timber prisms. The tensile load-bearing capacity of the tested joint was determined at 205.0 kN. Due to the advantages, the tested joints with inserted nail plates seem to be appropriate for joining suitable timber elements

Keywords

Test of the tensile load, timber structure

Key words in English

Test of the tensile load, timber structure

Authors

SCHMID, P.; DANĚK, P.; ROZSYPALOVÁ, I.; PLAČEK, V.

RIV year

2020

Released

29.05.2019

Publisher

IOP Publishing

Location

Bristol

Book

IOP Conference Series: Materials Science and Engineering

ISBN

1757-8981

Periodical

IOP Conference Series: Materials Science and Engineering

Volume

549

Number

1

State

United Kingdom of Great Britain and Northern Ireland

Pages from

1

Pages to

6

Pages count

6

URL

https://iopscience.iop.org/article/10.1088/1757-899X/549/1/012035/pdf

BibTex

@inproceedings{BUT157353,
  author="Pavel {Schmid} and Petr {Daněk} and Iva {Čairović} and Vladimír {Plaček}",
  title="Test of the tensile load capacity of a timber structure joint with an inserted nail plate",
  booktitle="IOP Conference Series: Materials Science and Engineering",
  year="2019",
  journal="IOP Conference Series: Materials Science and Engineering",
  volume="549",
  number="1",
  pages="1--6",
  publisher="IOP Publishing",
  address="Bristol",
  doi="10.1088/1757-899X/549/1/012035",
  issn="1757-8981",
  url="https://iopscience.iop.org/article/10.1088/1757-899X/549/1/012035/pdf"
}

Documents

Schmid_2019_IOP_Conf._Ser.__Mater._Sci._Eng._549_012035