Brno University of Technology - Vnitřní projekty VUT

- whole funder (2023-01-01 - 2024-12-31)

FEKT-S-23-8162

Czech

Boušek Jaroslav, prof. Ing., CSc. - fellow researcher
Búran Martin, Ing. - fellow researcher
Duz Aleksei, Ing. - fellow researcher
Dvorský Adam, Ing. - fellow researcher
Fohlerová Zdenka, doc. Mgr., Ph.D. - fellow researcher
Junasová Veronika, Ing. - fellow researcher
Košelová Zuzana, Mgr. - fellow researcher
Řezníček Michal, Ing., Ph.D. - fellow researcher
Šteffan Pavel, doc. Ing., Ph.D. - fellow researcher
Tomíček Pavel, Ing. - fellow researcher
Žilka Martin, Ing. - fellow researcher
Háze Jiří, doc. Ing., Ph.D. - principal person responsible

Department of Microelectronics
- (2023-01-01 - 2025-12-31)
Faculty of Electrical Engineering and Communication
- (2023-01-01 - 2025-12-31)

PHAM, N.; LEUCHTER, J.; DONG, Q. Wireless Battery Management System for Military Unmanned Vehicles. In Proceedings I of the 28th Conference STUDENT EEICT 2022 General papers. 1. Brno: Brno University of Technology, Faculty of Electrical Enmgineering and Communication, 2022. p. 202-206. ISBN: 978-80-214-6029-4.
Detail

PHAM, N.; BLOUDÍČEK, R.; LEUCHTER, J.; RYDLO, S.; DONG, Q. Comparative Analysis of Energy Storage and Buffer Units for Electric Military Vehicle: Survey of Experimental Results. Batteries-Basel, 2024, vol. 10, no. 2, p. 1-29. ISSN: 2313-0105.
Detail

KOŠELOVÁ, Z. Nanoporous Enzyme-Based Impedimetric Biosensor. In Proceedings I of the 28 th Conference STUDENT EEICT 2022 General Papers. 1. Brno: Brno University of Technology, Faculty of Electrical Engineering and Communication, 2022. p. 403-408. ISBN: 978-80-214-6029-4.
Detail

KLEDROWETZ, V.; PROKOP, R.; FUJCIK, L.; HÁZE, J. A Fully Differential Analog Front-End for Signal Processing from EMG Sensor in 28 nm FDSOI Technology. SENSORS, 2023, vol. 23, no. 7, p. 1-20. ISSN: 1424-8220.
Detail

TOMÍČEK, P.; BOUŠEK, J. FET Gate Driver Utilising Transient Gate Overvoltage. In 2023 46th International Spring Seminar on Electronics Technology (ISSE). International Spring Seminar on Electronics Technology ISSE. IEEE, 2023. p. 1-5. ISBN: 979-8-3503-3484-5. ISSN: 2161-2536.
Detail

JUNASOVÁ, V.; LEVEK, V.; ŠTEFFAN, P. The Proposal for Optimalization of Direction of Tilt Measurement in Small Angles. In 2023 46th International Spring Seminar on Electronics Technology (ISSE). International Spring Seminar on Electronics Technology ISSE. IEEE, 2023. p. 1-5. ISBN: 979-8-3503-3484-5. ISSN: 2161-2536.
Detail

ADÁMEK, M.; MLČEK, J.; SKOWRONKOVÁ, N.; ZVONKOVÁ, M.; JAŠŠO, M.; ADÁMKOVÁ, A.; SKÁCEL, J.; BUREŠOVÁ, I.; ŠEBESTÍKOVÁ, R.; ČERNEKOVÁ, M.; BUČKOVÁ, M. 3D Printed Fused Deposition Modeling (FDM) Capillaries for Chemiresistive Gas Sensors. SENSORS, 2023, vol. 23, no. 15, p. 1-17. ISSN: 1424-8220.
Detail

PHAM, N.; LEUCHTER, J.; VÁCLAVÍK, J. Test Bench for Experimental Analysis of Conductive Composite Materials for Aerospace Applications. In Proceedings I of the 28th Conference STUDENT EEICT 2022 General papers. 1. Brno: Brno University of Technology, Faculty of Electronic Engineering and Communication, 2022. p. 220-224. ISBN: 978-80-214-6029-4.
Detail

JUNASOVÁ, V.; LEVEK, V.; ŠTEFFAN, P. The Precise Measurement of Magnetic Azimuth. In Proceedings II of the 29th Conference STUDENT EEICT 2023 Selected Papers. 1. Brno: Brno University of Technology, Faculty of Elektronic Engineering and Communication, 2023. p. 166-170. ISBN: 978-80-214-6154-3.
Detail

KOŠELOVÁ, Z.; HORÁKOVÁ, L.; ALLAHAM, M.; BURDA, D.; KNÁPEK, A.; FOHLEROVÁ, Z. Cleaning of tungsten tips for subsequent cold field emission application. Abstracts Proceedings, International flash conference IMAPS - Czech and Slovak chapter. 9th. nám. Republiky 725/15, Brno: NOVPRESS s.r.o., 2023. p. 50-51. ISBN: 978-80-214-6185-7.
Detail

KOŠELOVÁ, Z.; SOBOLA, D.; HORÁKOVÁ, L.; BURDA, D.; KNÁPEK, A.; FOHLEROVÁ, Z. FUNCTIONAL TUNGSTEN-BASED THIN FILMS AND THEIR CHARACTERIZATION. In Conference Proceedings - METAL 2023. 1st 2023. Ostrava: TANGER Ltd, 2023. ISBN: 978-80-88365-12-9.
Detail

KOŠELOVÁ, Z.; KNÁPEK, A.; FOHLEROVÁ, Z. Fabrication and Characterization of Thermally Oxidized Tungsten-Based Thin Films for Application in Cold Field Emission Sources. Extended Abstract Book of 8th conference SURFINT-SREN VIII. Bratislava, Slovakia: Comenius University, 2023. p. 20-21. ISBN: 978-80-223-5713-5.
Detail

PHAM, N.; LEUCHTER, J.; HÁZE, J. Acquisition Module for Non-Destructive Testing of Aircraft Composite Structures. Brno: Brno University of Technology, 2023. p. 129-132.
Detail

KOŠELOVÁ, Z.; HORÁKOVÁ, L.; BURDA, D.; ALLAHAM, M.; KNÁPEK, A.; FOHLEROVÁ, Z. Cleaning of tungsten tips for subsequent use as cold field emitters or STM probes. Journal of Electrical Engineering, 2024, vol. 75, no. 1, p. 41-46. ISSN: 1339-309X.
Detail

OTÁHAL, A.; GABLECH, I.; SKÁCEL, J.; SZENDIUCH, I. Investigation of the Influence of Dam and Fill Encapsulating Material Shrinkage on a Semiconductor Substrate Warpage. In Proceedings of the International Spring Seminar on Electronics Technology. 2023. ISBN: 979-8-3503-3484-5.
Detail

KOPŘIVA, P.; OTÁHAL, A. Design of a micromanipulator for repairs of printed circuit boards. In Proceedings II of the 28th Conference STUDENT EEICT 2022 Selected papers. 1. Brno: Brno University of Technology, Faculty of Electrical Engineering and Communication, 2022. p. 40-43. ISBN: 978-80-214-6030-0.
Detail

BRANDEJS, P.; SKÁCEL, J. SCRATCH TESTER. In Proceedings II of the 28th Conference STUDENT EEICT 2022 Selected papers. 1. Brno: Brno University of Technology, Faculty of Electrical Engineering and Communication, 2022. p. 136-139. ISBN: 978-80-214-6030-0.
Detail

AUBRECHT, V. Proceedings I of the 29th Conference STUDENT EEICT 2023 General papers. Proceedings I of the 29th Conference STUDENT EEICT 2023 General papers. 1. Brno: Brno University of Technology, Faculty of Electrical Engineering and Communication, 2023. ISBN: 978-80-214-6153-6.
Detail

JANŮŠ, T.: sub-atmospheric pressure for CNC v2; Safety system for CNC vacuum inspection. U autora. (prototyp)
Detail

JANŮŠ, T.: Device for automatic detection of skeletal fiber defects in structured arrays v2.1; Device for automatic detection of skeletal fiber defects in structured arrays. U autora. (funkční vzorek)
Detail