• Measurement of electrical conductivity of human tissue: A feasibility study of a novel time-domain approach

  Publikační výsledkyRok: 2025

  DOLEŽAL, T.; ŠTUMPF, M.; QIRUI, H.; FRANEK, O. Measurement of electrical conductivity of human tissue: A feasibility study of a novel time-domain approach. MEASUREMENT, 2025, vol. 242, iss. Part A, p. 1-7. ISSN: 1873-412X.

• The Potential of Using Birotor Machines in Modern Transport Means

  Publikační výsledkyRok: 2025

  FOMIN, O.; CHUBYKALO, M.; LOHVINENKO, O.; PÍŠTĚK, V.; KUČERA, P. The Potential of Using Birotor Machines in Modern Transport Means. Machines, 2025, vol. 13, iss. 11, p. 1-18.

• Open-cell bipolar anodization of W and Ti: effect of bipolar electrode position

  Publikační výsledkyRok: 2025

  SEPÚLVEDA SEPÚLVEDA, L.; BAISHYA, K.; CICMANCOVA, V.; MACÁK, J. Open-cell bipolar anodization of W and Ti: effect of bipolar electrode position. Journal of Electroanalytical Chemistry, 2025, iss. 999, p. 1-8.

• Low-temperature sintered boron-doped S53P4 bioactive glass scaffolds fabricated by robocasting

  Publikační výsledkyRok: 2025

  VARLIK, E.; DROTÁROVÁ, L.; OURGESSA, A.; VITAZKOVA, M.; NAWAZ, Q.; CHEN, S.; MONTUFAR JIMENEZ, E.; GALUSEK, D.; BOCCACCINI, A.; MICHALEK, M. Low-temperature sintered boron-doped S53P4 bioactive glass scaffolds fabricated by robocasting. Journal of the American Ceramic Society, 2025, vol. 1, iss. 109, p. 1-20.

• Modelling structural material damage using the cohesive zone approach under operational conditions

  Publikační výsledkyRok: 2025

  KOZÁK, V. ; VALA, J.; DEREVIANKO, A. Modelling structural material damage using the cohesive zone approach under operational conditions. Materials, 2025, vol. 18, iss. 17, p. 4039-1 (4039-19 p.)

• Comparative analysis of machinability and microstructure in LPBF and conventionally processed M300 maraging steel

  Publikační výsledkyRok: 2025

  KOLOMÝ, Š.; SLANÝ, M.; DOUBRAVA, M.; SEDLÁK, J.; ZOUHAR, J.; ŘEHOŘEK, L. Comparative analysis of machinability and microstructure in LPBF and conventionally processed M300 maraging steel. Scientific Reports, 2025, vol. 15, iss. October, p. 1-21.

• Bioinspired Approach to 3D-Printed Auxetic Polymer- Hydrogel Composite via Frontal Polymerisation for Robust Scaffolds

  Publikační výsledkyRok: 2025

  BEČKA, F.; SEVRIUGINA, V.; LEPCIO, P.; WEITER, M. Bioinspired Approach to 3D-Printed Auxetic Polymer- Hydrogel Composite via Frontal Polymerisation for Robust Scaffolds. Book of Abstracts; 34th Annual Conference of the European Society for Biomaterials. 2025. p. 746.

• Gate-Controlled 3.3V CMOS Transistor-Based Constant Phase Element Design

  Publikační výsledkyRok: 2025

  SEMENOV, D.; ŠOTNER, R.; JEŘÁBEK, J.; THEUMER, R. Gate-Controlled 3.3V CMOS Transistor-Based Constant Phase Element Design. In Proceedings of 2025 International Conference on Applied Electronics. IEEE, 2025. p. 1-6. ISBN: 979-8-3315-3647-3.

• Data-Driven Prediction of Stress Response for Inelastic Discrete RVE

  Publikační výsledkyRok: 2025

  RAISINGER, J.; NOVÁK, L.; ELIÁŠ, J. Data-Driven Prediction of Stress Response for Inelastic Discrete RVE. 2025. p. 169.ISBN: 978-80-86246-96-3.

• Relationship Between Architectural Style and Property Value in the Czech Republic

  Publikační výsledkyRok: 2025

  Pavel KLIKA, David BRANDEJS, Karla HÁVA, Sofie POKORNÁ, Monika DOLEŽALOVÁ, Vítězslava HLAVINKOVÁ. Relationship Between Architectural Style and Property Value in the Czech Republic. Civil and Environmental Engineering, 2025, vol. 21, iss. 2, p. 825-839.

• An Eye-Tracking Analysis of Rider Behavior and Handling Strategy in Motorcycle Racing

  Publikační výsledkyRok: 2025

  BÖHM, M.; FOJTÁŠEK, J. An Eye-Tracking Analysis of Rider Behavior and Handling Strategy in Motorcycle Racing. Engineering Proceedings, 2025, vol. 113, iss. 1, p. 1-8.

• Development of a Data-Driven Methodology for Rapid Identification of Key Performance Indicators in Motorcycle Racing

  Publikační výsledkyRok: 2025

  FOJTÁŠEK, J.; BÖHM, M. Development of a Data-Driven Methodology for Rapid Identification of Key Performance Indicators in Motorcycle Racing. Engineering Proceedings, 2025, vol. 113, iss. 1, p. 1-10.

• 𝗙𝗿𝗼𝗺 𝗪𝗶𝗹𝗱 𝗧𝘆𝗽𝗲 𝘁𝗼 𝗣𝗛𝗔 𝗙𝗮𝗰𝘁𝗼𝗿𝘆: 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴 𝑪𝒂𝒍𝒅𝒊𝒎𝒐𝒏𝒂𝒔 𝒕𝒉𝒆𝒓𝒎𝒐𝒅𝒆𝒑𝒐𝒍𝒚𝒎𝒆𝒓𝒂𝒏𝒔

  Publikační výsledkyRok: 2025

  ŠLOSÁROVÁ, K.; IEREMENKO, A.; PACASOVÁ, V.; BERGER, M.; DVOŘÁK, P.; OBRUČA, S. 𝗙𝗿𝗼𝗺 𝗪𝗶𝗹𝗱 𝗧𝘆𝗽𝗲 𝘁𝗼 𝗣𝗛𝗔 𝗙𝗮𝗰𝘁𝗼𝗿𝘆: 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴 𝑪𝒂𝒍𝒅𝒊𝒎𝒐𝒏𝒂𝒔 𝒕𝒉𝒆𝒓𝒎𝒐𝒅𝒆𝒑𝒐𝒍𝒚𝒎𝒆𝒓𝒂𝒏𝒔. Lisbon: NOVA School of Science and Technoloígy, 2025. p. 88.

• Crack arrest in nanoceramic multilayers via precipitation-controlled sublayer design

  Publikační výsledkyRok: 2025

  KUTLESA, K.; KECKES, J.; DANIEL, R.; ZITEK, M.; TKADLETZ, M.; SCHIESTER, M.; ZIEGELWANGER, T.; LASSNIG, A.; BURGHAMMER, M.; MEINDLHUMER, M. Crack arrest in nanoceramic multilayers via precipitation-controlled sublayer design. Materials & Design, 2025, vol. 255, iss. March, p. 1-15.

• Analysis of the Possible Use of Straw from Agriculture as an Environmental Insulation Material in Buildings

  Publikační výsledkyRok: 2025

  PETERKOVÁ, J.; KORJENIC, A.; ZACH, J.; BYDŽOVSKÝ, J.; HALÁSOVÁ, S.; SESTO, E. Analysis of the Possible Use of Straw from Agriculture as an Environmental Insulation Material in Buildings. Sustainability, 2025, vol. 17, iss. 8, p. 1-22.

Zobrazeny výsledky 1531 - 1545 z (ze) 10000 výsledků.