Detail publikačního výsledku

Injection Moulding of Alumina Bioceramics

TRUNEC, M., CIHLÁŘ, J.

Originální název

Injection Moulding of Alumina Bioceramics

Anglický název

Injection Moulding of Alumina Bioceramics

Druh

Kapitola, resp. kapitoly v odborné knize

Originální abstrakt

Alumina ceramics were prepared by injection moulding of mixtures of 63 vol% of alumina powders and 37 vol% of thermoplastic binder. The mixture of paraffin wax and ethylene-vinylacetate copolymer was used as thermoplastic binder. Several types of alumina powders were tested. Debinding and sintering of alumina ceramics were made in the air atmosphere. The physical and mechanical properties of the ceramics - bulk density, shrinkage, bending strength, fracture toughness and microstructure - were studied. The relations between properties of the alumina powders, parameters of injection moulding process and properties of the alumina ceramics were discussed. The alumina bioceramics prepared by powder injection moulding process were found suitable for dental application.

Anglický abstrakt

Alumina ceramics were prepared by injection moulding of mixtures of 63 vol% of alumina powders and 37 vol% of thermoplastic binder. The mixture of paraffin wax and ethylene-vinylacetate copolymer was used as thermoplastic binder. Several types of alumina powders were tested. Debinding and sintering of alumina ceramics were made in the air atmosphere. The physical and mechanical properties of the ceramics - bulk density, shrinkage, bending strength, fracture toughness and microstructure - were studied. The relations between properties of the alumina powders, parameters of injection moulding process and properties of the alumina ceramics were discussed. The alumina bioceramics prepared by powder injection moulding process were found suitable for dental application.

Klíčová slova

bioceramics, injection moulding, properties

Klíčová slova v angličtině

bioceramics, injection moulding, properties

Autoři

TRUNEC, M., CIHLÁŘ, J.

Vydáno

01.01.1995

Nakladatel

Techna Srl.

Místo

Florencie, Itálie

ISBN

88-86538-0

Kniha

Materials in Clinical Applications

Strany od

99

Strany počet

8

Plný text v Digitální knihovně

http://hdl.handle.net/

BibTex

@inbook{BUT51735,
  author="Martin {Trunec} and Jaroslav {Cihlář}",
  title="Injection Moulding of Alumina Bioceramics",
  booktitle="Materials in Clinical Applications",
  year="1995",
  publisher="Techna Srl.",
  address="Florencie, Itálie",
  pages="8",
  isbn="88-86538-0"
}