Detail publikačního výsledku

APPLICATION OF ACOUSTIC EMISSION METHOD DURING HIGH CYCLE FATIGUE OF ALUMINIUM ALLOY

VLAŠIC, F.; MAZAL, P.; LIŠKUTÍN, P.

Originální název

APPLICATION OF ACOUSTIC EMISSION METHOD DURING HIGH CYCLE FATIGUE OF ALUMINIUM ALLOY

Anglický název

APPLICATION OF ACOUSTIC EMISSION METHOD DURING HIGH CYCLE FATIGUE OF ALUMINIUM ALLOY

Druh

Článek recenzovaný mimo WoS a Scopus

Originální abstrakt

This paper deals with evaluation of degradation processes, which occur at cyclic loading of samples of Al alloy EN AW-2017/T4. NDT procedure - acoustic emission (AE) method was used for detection of microstructure changes during stages of fatigue damage accumulation and micro-cracks initialisation. This measurement was completed with analysis of loading frequency changes of the fatigue test device. AE signal records obtained with use of the newly developed AE analyser with continual recording of signal are commented and showed other parameters of AE sample in detail.

Anglický abstrakt

This paper deals with evaluation of degradation processes, which occur at cyclic loading of samples of Al alloy EN AW-2017/T4. NDT procedure - acoustic emission (AE) method was used for detection of microstructure changes during stages of fatigue damage accumulation and micro-cracks initialisation. This measurement was completed with analysis of loading frequency changes of the fatigue test device. AE signal records obtained with use of the newly developed AE analyser with continual recording of signal are commented and showed other parameters of AE sample in detail.

Klíčová slova

fatigue of materials, acoustic emission, crack, sensor

Klíčová slova v angličtině

fatigue of materials, acoustic emission, crack, sensor

Autoři

VLAŠIC, F.; MAZAL, P.; LIŠKUTÍN, P.

Rok RIV

2011

Vydáno

05.11.2010

Nakladatel

TU VSB Ostrava

Místo

Ostrava

ISSN

1210-0471

Periodikum

Transaction of the VŠB-Technical university of Ostrava, Mechanical series

Svazek

56

Číslo

2

Stát

Česká republika

Strany od

187

Strany do

196

Strany počet

10

BibTex

@article{BUT49959,
  author="František {Vlašic} and Pavel {Mazal} and Petr {Liškutín}",
  title="APPLICATION OF ACOUSTIC EMISSION METHOD DURING HIGH CYCLE FATIGUE OF ALUMINIUM ALLOY",
  journal="Transaction of the VŠB-Technical university of Ostrava, Mechanical series",
  year="2010",
  volume="56",
  number="2",
  pages="187--196",
  issn="1210-0471"
}