Detail publikačního výsledku

Applying RP-FDM technology to produce prototype castings using investment casting method

MACKŮ, M.; HORÁČEK, M.

Originální název

Applying RP-FDM technology to produce prototype castings using investment casting method

Anglický název

Applying RP-FDM technology to produce prototype castings using investment casting method

Druh

Článek recenzovaný mimo WoS a Scopus

Originální abstrakt

The research focused on the production of prototype castings, which is mapped out starting from the drawing documentation up to the production of the casting itself. The FDM method was applied for the production of the 3D pattern. Its main objective was to find out, what dimensional changes happened during individual production stages starting from the 3D pattern printing, through a silicon mould production, wax patterns casting, making shells, melting out wax from shells and drying, up to the production of the final casting itself. 5 measurements of determined dimensions were made during the production, which were processed and evaluated mathematically. A determination of shrinkage and a proposal of measures to maintain the dimensional stability of the final casting so as to meet requirements specified by a customer were the results.

Anglický abstrakt

The research focused on the production of prototype castings, which is mapped out starting from the drawing documentation up to the production of the casting itself. The FDM method was applied for the production of the 3D pattern. Its main objective was to find out, what dimensional changes happened during individual production stages starting from the 3D pattern printing, through a silicon mould production, wax patterns casting, making shells, melting out wax from shells and drying, up to the production of the final casting itself. 5 measurements of determined dimensions were made during the production, which were processed and evaluated mathematically. A determination of shrinkage and a proposal of measures to maintain the dimensional stability of the final casting so as to meet requirements specified by a customer were the results.

Klíčová slova

Rapid prototyping, a 3D pattern, an ABS pattern, a silicon mould, a casting, a dimensional stabilit

Klíčová slova v angličtině

Rapid prototyping, a 3D pattern, an ABS pattern, a silicon mould, a casting, a dimensional stabilit

Autoři

MACKŮ, M.; HORÁČEK, M.

Rok RIV

2013

Vydáno

15.11.2012

Nakladatel

Foundry Commission of the Polish Academy of Sciences

Místo

Polsko

ISSN

1897-3310

Periodikum

Archives of Foundry Engineering

Svazek

12

Číslo

3

Stát

Polská republika

Strany od

75

Strany do

82

Strany počet

7

BibTex

@article{BUT98364,
  author="Martin {Macků} and Milan {Horáček}",
  title="Applying RP-FDM technology to produce prototype castings using investment casting method",
  journal="Archives of Foundry Engineering",
  year="2012",
  volume="12",
  number="3",
  pages="75--82",
  issn="1897-3310"
}