Detail publikačního výsledku

MODELING AND NUMERICAL SIMULATION OF LITHIUM ION BATTERY

VYROUBAL, P.; MAXA, J.; VONDRÁK, J.; KAZDA, T.

Originální název

MODELING AND NUMERICAL SIMULATION OF LITHIUM ION BATTERY

Anglický název

MODELING AND NUMERICAL SIMULATION OF LITHIUM ION BATTERY

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

Lithium-ion batteries are incredibly popular these days. You can find them in laptops, PDAs, cell phones, iPods and so on. The energy density of lithium-ion is typically twice as high as of the standard nickelcadmium cell. Most of today's mobile phones run on a single cell. A nickel-based pack would require three 1.2 volt cells connected in series. Despite its overall advantages, lithium-ion has its drawbacks. It is fragile and requires a protection circuit to maintain safe operation. Built into each pack, the protection circuit limits the peak voltage of each cell during charge and prevents the cell voltage from dropping too low on discharge. In addition, the cell temperature is monitored to prevent temperature extremes. The maximum charge and discharge current on most packs is limited to between 1C and 2C.

Anglický abstrakt

Lithium-ion batteries are incredibly popular these days. You can find them in laptops, PDAs, cell phones, iPods and so on. The energy density of lithium-ion is typically twice as high as of the standard nickelcadmium cell. Most of today's mobile phones run on a single cell. A nickel-based pack would require three 1.2 volt cells connected in series. Despite its overall advantages, lithium-ion has its drawbacks. It is fragile and requires a protection circuit to maintain safe operation. Built into each pack, the protection circuit limits the peak voltage of each cell during charge and prevents the cell voltage from dropping too low on discharge. In addition, the cell temperature is monitored to prevent temperature extremes. The maximum charge and discharge current on most packs is limited to between 1C and 2C.

Klíčová slova

Lithium-ion battery, simulation, Matlab, Comsol

Klíčová slova v angličtině

Lithium-ion battery, simulation, Matlab, Comsol

Autoři

VYROUBAL, P.; MAXA, J.; VONDRÁK, J.; KAZDA, T.

Rok RIV

2013

Vydáno

18.10.2012

Nakladatel

Brno University of Technology

Místo

Brno

ISBN

978-80-214-4610-6

Kniha

Advanced Batteries Accumulators and Fuel Cells - 13th ABAF Book of Proceedings

Strany od

118

Strany do

124

Strany počet

7

BibTex

@inproceedings{BUT94513,
  author="Petr {Vyroubal} and Jiří {Maxa} and Jiří {Vondrák} and Tomáš {Kazda}",
  title="MODELING AND NUMERICAL SIMULATION OF LITHIUM ION BATTERY",
  booktitle="Advanced Batteries Accumulators and Fuel Cells - 13th ABAF Book of Proceedings",
  year="2012",
  pages="118--124",
  publisher="Brno University of Technology",
  address="Brno",
  isbn="978-80-214-4610-6"
}