Detail publikačního výsledku

A Flickermeter based on Voltage Peak Detection Method - Part II: Standardized Verification and Performance in Real Deployment

ŠLEZINGR, J.; DRÁPELA, J.

Originální název

A Flickermeter based on Voltage Peak Detection Method - Part II: Standardized Verification and Performance in Real Deployment

Anglický název

A Flickermeter based on Voltage Peak Detection Method - Part II: Standardized Verification and Performance in Real Deployment

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

The paper deals with a standardized verification proce-dure applied on an alternative digital time domain based flickermeter type having response to high-frequency inter-harmonics and its performance testing in real deployment. The flickermeter utilizes a Voltage Peak Detection (VPD) method and the signal processing is realized using virtual instrumentation in LabView together with a NI cDAQ plat-form. Standardize verification is performed by means of tests and requirements defined in the standard IEC 61000-4-15. The performance in the real deployment was tested by a set of tests focused mainly on cumulative disturbances includ-ing interharmonic distortion and by a long time measure-ment in the supply network with the simultaneous deployment of other types of flickermeters. The results of all measurements are compared and discussed.

Anglický abstrakt

The paper deals with a standardized verification proce-dure applied on an alternative digital time domain based flickermeter type having response to high-frequency inter-harmonics and its performance testing in real deployment. The flickermeter utilizes a Voltage Peak Detection (VPD) method and the signal processing is realized using virtual instrumentation in LabView together with a NI cDAQ plat-form. Standardize verification is performed by means of tests and requirements defined in the standard IEC 61000-4-15. The performance in the real deployment was tested by a set of tests focused mainly on cumulative disturbances includ-ing interharmonic distortion and by a long time measure-ment in the supply network with the simultaneous deployment of other types of flickermeters. The results of all measurements are compared and discussed.

Klíčová slova

Voltage fluctuation, Interharmonics, VPD Flickermeter, Test system, LabView

Klíčová slova v angličtině

Voltage fluctuation, Interharmonics, VPD Flickermeter, Test system, LabView

Autoři

ŠLEZINGR, J.; DRÁPELA, J.

Rok RIV

2013

Vydáno

23.05.2012

Nakladatel

Brno University of Tecnology

Místo

Brno

ISBN

978-80-214-4514-7

Kniha

Proceedings of the 13th International Scientific Conference Electric Power Engineering 2012

Edice

Vol. 1

Strany od

443

Strany do

448

Strany počet

6

BibTex

@inproceedings{BUT92251,
  author="Jan {Šlezingr} and Jiří {Drápela}",
  title="A Flickermeter based on Voltage Peak Detection Method - Part II: Standardized Verification and Performance in Real Deployment",
  booktitle="Proceedings of the 13th International Scientific Conference Electric Power Engineering 2012",
  year="2012",
  series="Vol. 1",
  number="1",
  pages="443--448",
  publisher="Brno University of Tecnology",
  address="Brno",
  isbn="978-80-214-4514-7"
}