Detail publikačního výsledku

Experimental Technique for Heat Transfer Measurements on Fast Moving Sprayed Surfaces

POHANKA, M.; BELLEROVÁ, H.; RAUDENSKÝ, M.

Originální název

Experimental Technique for Heat Transfer Measurements on Fast Moving Sprayed Surfaces

Anglický název

Experimental Technique for Heat Transfer Measurements on Fast Moving Sprayed Surfaces

Druh

Článek recenzovaný mimo WoS a Scopus

Originální abstrakt

Experimental technique for the measurements of heat transfer distribution at spray cooled surfaces is described. The measurements were done at moving surfaces up to a velocity of 12 m/s. The samples of different cross sections (flat, profile, rail, etc.) can move linearly. Different approaches are used for the measurements of heat transfer coefficient (HTC) distribution or heat flux distribution at rotating cylindrical body. The results of HTC distribution for spray cooling are shown and are compared to water impingement density. Influence of water impingement density, water pressure, spray configuration and surface velocity is studied. Examples for water nozzles and for mist nozzles (water-air) are given. Emulsions and oils are beneficial for some industrial applications of spray cooling. The cooling experiments performed with these liquids provide information about decrease of cooling intensity even for a low concentration of the oils in water. The results comparing the cooling properties of these liquids and their comparison to water are presented.

Anglický abstrakt

Experimental technique for the measurements of heat transfer distribution at spray cooled surfaces is described. The measurements were done at moving surfaces up to a velocity of 12 m/s. The samples of different cross sections (flat, profile, rail, etc.) can move linearly. Different approaches are used for the measurements of heat transfer coefficient (HTC) distribution or heat flux distribution at rotating cylindrical body. The results of HTC distribution for spray cooling are shown and are compared to water impingement density. Influence of water impingement density, water pressure, spray configuration and surface velocity is studied. Examples for water nozzles and for mist nozzles (water-air) are given. Emulsions and oils are beneficial for some industrial applications of spray cooling. The cooling experiments performed with these liquids provide information about decrease of cooling intensity even for a low concentration of the oils in water. The results comparing the cooling properties of these liquids and their comparison to water are presented.

Klíčová slova

heat transfer, spray cooling, coolants

Klíčová slova v angličtině

heat transfer, spray cooling, coolants

Autoři

POHANKA, M.; BELLEROVÁ, H.; RAUDENSKÝ, M.

Rok RIV

2010

Vydáno

16.05.2009

Nakladatel

Journal of ASTME International

Místo

US

ISSN

1546-962X

Periodikum

Journal of ASTM International

Svazek

6

Číslo

4

Stát

Spojené státy americké

Strany od

1

Strany do

9

Strany počet

9

BibTex

@article{BUT48806,
  author="Michal {Pohanka} and Hana {Bellerová} and Miroslav {Raudenský}",
  title="Experimental Technique for Heat Transfer Measurements on Fast Moving Sprayed Surfaces",
  journal="Journal of ASTM International",
  year="2009",
  volume="6",
  number="4",
  pages="1--9",
  issn="1546-962X"
}