Detail publikačního výsledku

Design of Atomizer for Waste Fuel Combustion with Decreased Exhaust Gas Emissions

JEDELSKÝ, J.; JÍCHA, M.

Originální název

Design of Atomizer for Waste Fuel Combustion with Decreased Exhaust Gas Emissions

Anglický název

Design of Atomizer for Waste Fuel Combustion with Decreased Exhaust Gas Emissions

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

Combustion of waste fuels becomes more and more commonplace. The waste liquids often have low heating value, variable physical properties and may contain solid particles. It is necessary to account for these features when selecting an appropriate atomizer. Our task was to design an atomizer for simultaneous atomization of polymer solution and cracked oil. The polymer solution has high viscosity, low heating value and contains particles up to 2mm in diameter. The oil has a higher heating value and is used to assure an effective combustion. It is important to enable independent control of both liquid flow-rates. The atomizer should be operated under low fluid pressure about 0.2-0.3 MPa and should provide a stable spray of good quality to improve combustion efficiency and decrease exhaust gas emissions compared to the current design.

Anglický abstrakt

Combustion of waste fuels becomes more and more commonplace. The waste liquids often have low heating value, variable physical properties and may contain solid particles. It is necessary to account for these features when selecting an appropriate atomizer. Our task was to design an atomizer for simultaneous atomization of polymer solution and cracked oil. The polymer solution has high viscosity, low heating value and contains particles up to 2mm in diameter. The oil has a higher heating value and is used to assure an effective combustion. It is important to enable independent control of both liquid flow-rates. The atomizer should be operated under low fluid pressure about 0.2-0.3 MPa and should provide a stable spray of good quality to improve combustion efficiency and decrease exhaust gas emissions compared to the current design.

Klíčová slova

effervescent atomization, waste fuel, exhaust gas emissions, spray

Klíčová slova v angličtině

effervescent atomization, waste fuel, exhaust gas emissions, spray

Autoři

JEDELSKÝ, J.; JÍCHA, M.

Vydáno

06.09.2006

Nakladatel

University of Heidelberg, Germany

Místo

Heidelberg, Germany

Kniha

Proceedings 31st International Symposium on Combustion

Edice

1

Strany od

34

Strany do

34

Strany počet

1

BibTex

@inproceedings{BUT19885,
  author="Jan {Jedelský} and Miroslav {Jícha}",
  title="Design of Atomizer for Waste Fuel Combustion with Decreased Exhaust Gas Emissions",
  booktitle="Proceedings 31st International Symposium on Combustion",
  year="2006",
  series="1",
  number="1",
  pages="34--34",
  publisher="University of Heidelberg, Germany",
  address="Heidelberg, Germany"
}