Detail publikačního výsledku

THE INFLUENCE OF THE HUMAN FACTOR ON THE MEASUREMENT RESULTS ACQUIRED BY USING THE RESISTANCE DRILLING DEVICE RINNTECH RESISTOGRAPH R650-EA

DZIADKOVÁ, A.; HEŘMÁNKOVÁ, V.; ANTON, O.; SZÓRÁD, M.

Originální název

THE INFLUENCE OF THE HUMAN FACTOR ON THE MEASUREMENT RESULTS ACQUIRED BY USING THE RESISTANCE DRILLING DEVICE RINNTECH RESISTOGRAPH R650-EA

Anglický název

THE INFLUENCE OF THE HUMAN FACTOR ON THE MEASUREMENT RESULTS ACQUIRED BY USING THE RESISTANCE DRILLING DEVICE RINNTECH RESISTOGRAPH R650-EA

Druh

Stať ve sborníku mimo WoS a Scopus

Originální abstrakt

The diagnostics of wooden structures using the detection drill RINNTECH Resistograph R650-EA is one of the popular semi-destructive methods. This article deals with the issue of the influence of the human factor on the measurement results. The recommended testing direction is the radial direction, perpendicular to the grain. However, the desired direction is sometimes difficult to maintain. The experiment takes into account three different factors that may occur during the testing. The goal is to determine to what extent the human factor affects the measured results. Thanks to the conducted research, it was found that gradual tilting of the device during measurements influences the measurements most significantly.

Anglický abstrakt

The diagnostics of wooden structures using the detection drill RINNTECH Resistograph R650-EA is one of the popular semi-destructive methods. This article deals with the issue of the influence of the human factor on the measurement results. The recommended testing direction is the radial direction, perpendicular to the grain. However, the desired direction is sometimes difficult to maintain. The experiment takes into account three different factors that may occur during the testing. The goal is to determine to what extent the human factor affects the measured results. Thanks to the conducted research, it was found that gradual tilting of the device during measurements influences the measurements most significantly.

Klíčová slova

Wood diagnostics, resistance micro-drilling, resistograph, resistance characteristics, human factor influence

Klíčová slova v angličtině

Wood diagnostics, resistance micro-drilling, resistograph, resistance characteristics, human factor influence

Autoři

DZIADKOVÁ, A.; HEŘMÁNKOVÁ, V.; ANTON, O.; SZÓRÁD, M.

Rok RIV

2025

Vydáno

01.04.2024

Nakladatel

Brno University of Technology, Faculty of Civil Engineering

Místo

Brno

ISBN

978-80-86433-83-7

Kniha

JUNIORSTAV 2024

Edice

26

ISSN

3029-5904

Periodikum

Juniorstav 2024

Stát

Česká republika

Strany počet

6

URL

https://juniorstav.fce.vutbr.cz/wp-content/uploads/2024/04/03_DOI_24023-FINAL-Aneta-Dziadek.pdf

Plný text v Digitální knihovně

http://hdl.handle.net/

BibTex

@inproceedings{BUT196516,
  author="Aneta {Dziadková} and Věra {Heřmánková} and Ondřej {Anton} and Martin {Szórád}",
  title="THE INFLUENCE OF THE HUMAN FACTOR ON THE MEASUREMENT RESULTS ACQUIRED BY USING THE RESISTANCE DRILLING DEVICE RINNTECH RESISTOGRAPH R650-EA",
  booktitle="JUNIORSTAV 2024",
  year="2024",
  series="26",
  journal="Juniorstav 2024",
  number="1",
  pages="6",
  publisher="Brno University of Technology, Faculty of Civil Engineering",
  address="Brno",
  doi="10.13164/juniorstav.2024.24023",
  isbn="978-80-86433-83-7",
  issn="3029-5904",
  url="https://juniorstav.fce.vutbr.cz/wp-content/uploads/2024/04/03_DOI_24023-FINAL-Aneta-Dziadek.pdf"
}