Detail publikačního výsledku

DYNAMIC POSITION MEASUREMENT OF THE CNC MACHINE USING LASER INTERFEROMETRY

VIROSTKOVÁ, K.; HOLUB, M.; MAREK, T.; KROUPA, J.; MAREK, J.

Originální název

DYNAMIC POSITION MEASUREMENT OF THE CNC MACHINE USING LASER INTERFEROMETRY

Anglický název

DYNAMIC POSITION MEASUREMENT OF THE CNC MACHINE USING LASER INTERFEROMETRY

Druh

Článek WoS

Originální abstrakt

Currently, emphasis is placed on the ever-higher accuracy and speed of measuring the geometric accuracy of CNC machine tools. Achieving the highest possible accuracy is often time-consuming, which results in higher financial costs. The purpose of this study was to verify the suitability of the dynamic measurement of the position CNC machine based on laser interferometry using angular optics concerning static measurement. In the case of both measurements, a commercially available laser interferometer XL-80 was used. First, a static measurement was performed on the horizontal X axis, then a set of dynamic measurements was performed, and the last static measurement was evaluated as a control. The test therefore assesses the accuracy of dynamic position measurement in accordance with ISO 230-2 parameters. The advantage of dynamic measurement is the provision of a more realistic and detailed view of CNC machine tool errors thanks to the high resolution of the measurement itself. At the same time, this research opens another unexplored area of mutual synchronization of data obtained from the CNC machine and data from the reference method.

Anglický abstrakt

Currently, emphasis is placed on the ever-higher accuracy and speed of measuring the geometric accuracy of CNC machine tools. Achieving the highest possible accuracy is often time-consuming, which results in higher financial costs. The purpose of this study was to verify the suitability of the dynamic measurement of the position CNC machine based on laser interferometry using angular optics concerning static measurement. In the case of both measurements, a commercially available laser interferometer XL-80 was used. First, a static measurement was performed on the horizontal X axis, then a set of dynamic measurements was performed, and the last static measurement was evaluated as a control. The test therefore assesses the accuracy of dynamic position measurement in accordance with ISO 230-2 parameters. The advantage of dynamic measurement is the provision of a more realistic and detailed view of CNC machine tool errors thanks to the high resolution of the measurement itself. At the same time, this research opens another unexplored area of mutual synchronization of data obtained from the CNC machine and data from the reference method.

Klíčová slova

dynamic measurement; static measurement; position deviation; large CNC machine tools; laser interferometry

Klíčová slova v angličtině

dynamic measurement; static measurement; position deviation; large CNC machine tools; laser interferometry

Autoři

VIROSTKOVÁ, K.; HOLUB, M.; MAREK, T.; KROUPA, J.; MAREK, J.

Rok RIV

2025

Vydáno

11.12.2024

Nakladatel

MM Publishing

Místo

Praha

ISSN

1805-0476

Periodikum

MM Science Journal

Svazek

2024

Číslo

December 2024

Stát

Česká republika

Strany od

7975

Strany do

7980

Strany počet

6

URL

https://www.mmscience.eu/journal/issues/december-2024/articles/dynamic-position-measurement-of-the-cnc-machine-using-laser-interferometry

BibTex

@article{BUT193568,
  author="Kristína {Virostková} and Michal {Holub} and Tomáš {Marek} and Jiří {Kroupa} and Jiří {Marek}",
  title="DYNAMIC POSITION MEASUREMENT OF THE CNC MACHINE USING LASER INTERFEROMETRY",
  journal="MM Science Journal",
  year="2024",
  volume="2024",
  number="December 2024",
  pages="7975--7980",
  doi="10.17973/MMSJ.2024\{_}12\{_}2024091",
  issn="1803-1269",
  url="https://www.mmscience.eu/journal/issues/december-2024/articles/dynamic-position-measurement-of-the-cnc-machine-using-laser-interferometry"
}