Mechanical fracture parameters of hemp fibre reinforced cement-based composites with recycled aggregate

Mechanical fracture parameters of hemp fibre reinforced cement-based composites with recycled aggregate

Stať ve sborníku mimo WoS a Scopus

This paper aims to evaluate the effect of replacement of aggregate by recycled one on fracture response of selected composites. These are hemp fibre reinforced cement-based composites. Four different mixtures were prepared: in reference one, the only natural aggregate was used whereas in the other three mixtures, the natural aggregate was replaced by recycled one in the amount of 10, 25 and 50 %, respectively. All mixtures contained hemp fibres with a length of 10 mm in the dosage of 1 % by volume. In order to determine the selected mechanical fracture characteristics of the investigated composites, three-point bending fracture tests were carried out on prismatic specimens with nominal dimensions 40 × 40 × 160 mm3 provided with an initial notch. During the whole course of the testing, the loading process was governed by a constant displacement increment of 0.02 mm/min. The vertical displacement (midspan deflection) was measured using the inductive sensor mounted on a special measurement frame placed on the specimens. The fracture tests were terminated when the midspan deflection reached 0.5 mm. The mechanical fracture parameters were obtained through a direct evaluation of the fracture test data via the effective crack model and the work-of-fracture method. The paper shows that composites with a higher dosage of recycled aggregate (25 and 50 wt%) achieve similar values of mechanical fracture properties, so this replacement can be recommended.

This paper aims to evaluate the effect of replacement of aggregate by recycled one on fracture response of selected composites. These are hemp fibre reinforced cement-based composites. Four different mixtures were prepared: in reference one, the only natural aggregate was used whereas in the other three mixtures, the natural aggregate was replaced by recycled one in the amount of 10, 25 and 50 %, respectively. All mixtures contained hemp fibres with a length of 10 mm in the dosage of 1 % by volume. In order to determine the selected mechanical fracture characteristics of the investigated composites, three-point bending fracture tests were carried out on prismatic specimens with nominal dimensions 40 × 40 × 160 mm3 provided with an initial notch. During the whole course of the testing, the loading process was governed by a constant displacement increment of 0.02 mm/min. The vertical displacement (midspan deflection) was measured using the inductive sensor mounted on a special measurement frame placed on the specimens. The fracture tests were terminated when the midspan deflection reached 0.5 mm. The mechanical fracture parameters were obtained through a direct evaluation of the fracture test data via the effective crack model and the work-of-fracture method. The paper shows that composites with a higher dosage of recycled aggregate (25 and 50 wt%) achieve similar values of mechanical fracture properties, so this replacement can be recommended.

cement-based composite, fracture, hemp fibre, recycled aggregate

cement-based composite, fracture, hemp fibre, recycled aggregate

ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; POLETANOVIC, B.; MERTA, I.; KERŠNER, Z.

27.11.2022

IOP Publishing

Bristol

IOP Conference Series: Materials Science and Engineering

Spojené království Velké Británie a Severního Irska

1

6

6