Detail publikačního výsledku

Influence of Production Parameters on the Properties of 3D Printed Magnesium Alloy Mg-4Y-3RE-Zr (WE43)

KRIŠTOFOVÁ, P.; ROUDNICKÁ, M.; KUBÁSEK, J.; PALOUŠEK, D.; SUCHÝ, J.; VOJTĚCH, D.

Originální název

Influence of Production Parameters on the Properties of 3D Printed Magnesium Alloy Mg-4Y-3RE-Zr (WE43)

Anglický název

Influence of Production Parameters on the Properties of 3D Printed Magnesium Alloy Mg-4Y-3RE-Zr (WE43)

Druh

Článek Scopus

Originální abstrakt

This paper reports on the influence of production parameters on the properties of 3D printed magnesium alloy Mg-4Y-3RE-Zr (WE43) produced by the selective laser melting method. We present microstructures and mechanical properties of four selected samples prepared under various production parameters. Optical and scanning electron microscopy together with energy-dispersive X-ray spectrometry were used for microstructure analysis. Porosity was evaluated based on image analysis. To represent differences in mechanical properties, microhardness measurement and compression tests were performed. Based on our observations of microstructure quality and performed tests, the results of the parameter impact study are further applied to the production of products of the required quality.

Anglický abstrakt

This paper reports on the influence of production parameters on the properties of 3D printed magnesium alloy Mg-4Y-3RE-Zr (WE43) produced by the selective laser melting method. We present microstructures and mechanical properties of four selected samples prepared under various production parameters. Optical and scanning electron microscopy together with energy-dispersive X-ray spectrometry were used for microstructure analysis. Porosity was evaluated based on image analysis. To represent differences in mechanical properties, microhardness measurement and compression tests were performed. Based on our observations of microstructure quality and performed tests, the results of the parameter impact study are further applied to the production of products of the required quality.

Klíčová slova

Magnesium, WE43; Production parameters; Properties; Selective Laser Melting

Klíčová slova v angličtině

Magnesium, WE43; Production parameters; Properties; Selective Laser Melting

Autoři

KRIŠTOFOVÁ, P.; ROUDNICKÁ, M.; KUBÁSEK, J.; PALOUŠEK, D.; SUCHÝ, J.; VOJTĚCH, D.

Vydáno

01.04.2019

Nakladatel

J. E. Purkyne University in Usti nad Labem

Místo

Usti nad Labem

ISSN

1213-2489

Periodikum

Manufacturing Technology

Svazek

19

Číslo

4

Stát

Česká republika

Strany od

613

Strany do

618

Strany počet

6

URL

https://www.journalmt.com/artkey/mft-201904-0012_influence-of-production-parameters-on-the-properties-of-3d-printed-magnesium-alloy-mg-4y-3re-zr-we43.php

BibTex

@article{BUT177083,
  author="Patrícia {Krištofová} and Michaela {Roudnická} and Jiří {Kubásek} and David {Paloušek} and Jan {Suchý} and Dalibor {Vojtěch}",
  title="Influence of Production Parameters on the Properties of 3D Printed Magnesium Alloy Mg-4Y-3RE-Zr (WE43)",
  journal="Manufacturing Technology",
  year="2019",
  volume="19",
  number="4",
  pages="613--618",
  doi="10.21062/ujep/343.2019/a/1213-2489/MT/19/4/613",
  issn="1213-2489",
  url="https://www.journalmt.com/artkey/mft-201904-0012_influence-of-production-parameters-on-the-properties-of-3d-printed-magnesium-alloy-mg-4y-3re-zr-we43.php"
}