Detail publikace

The influence of plate corrugations geometry scale factor on performance of plate heat exchanger as condenser of vapour from its mixture with noncondensing gas

Kapustenko, P.O., Klemeš, J.J., Arsenyeva, O.P., Kusakov, S.K., Tovazhnyanskyy, L.L.

Originální název

The influence of plate corrugations geometry scale factor on performance of plate heat exchanger as condenser of vapour from its mixture with noncondensing gas

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

The condensation of steam from a steam-air mixture is studied experimentally at three samples of Plate Heat Exchanger (PHE) channel. For three test samples corrugations are similar but differ in scale with the height 5, 7.5 and 10 mm. The results of tests are compared to calculations with one dimensional mathematical model of the process. The identification of correlations for local heat and mass transfer coefficients, as also friction factor in condensing two-phase flow, is made by comparison of computed results with tests data. The correlations for condensing two-phase flow are based on single-phase correlations for considered channels. For mass transfer coefficients, the best results are obtained using a stagnant film model for accounting transverse mass flux influence. For the prediction of pressure losses in two-phase condensing flow, the correlation with Lockhart-Martinelli parameters is used for zones of low liquid flow rates. For other channelzones are proposed its combination with an equation based on a dispersed annular model of flow structure. The presented equations can be used for calculation of heat and mass transfer intensity and pressure losses in two-phase condensing flow when designing PHE for condensation of steam from its mixture with air by local process parameters.

Klíčová slova

Plate heat exchanger; Heat transfer; Mass transfer; Condensation; Two-phase flow; Pressure drop; MASS-TRANSFER ANALOGY; PRESSURE-DROP; EXPERIMENTAL VALIDATION; WASTE HEAT; STEAM; EXHAUST; TUBE; FLOW; RECOVERY; CHANNELS

Autoři

Kapustenko, P.O., Klemeš, J.J., Arsenyeva, O.P., Kusakov, S.K., Tovazhnyanskyy, L.L.

Vydáno

15. 6. 2020

Nakladatel

Elsevier Ltd

Místo

PERGAMON-ELSEVIER SCIENCE LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND

ISSN

0360-5442

Periodikum

Energy

Číslo

201

Stát

Spojené království Velké Británie a Severního Irska

Strany od

117661

Strany do

117661

Strany počet

11

URL

https://www.sciencedirect.com/science/article/pii/S0360544220307684?via%3Dihub

BibTex

@article{BUT165855,
  author="Jiří {Klemeš}",
  title="The influence of plate corrugations geometry scale factor on performance of plate heat exchanger as condenser of vapour from its mixture with noncondensing gas",
  journal="Energy",
  year="2020",
  number="201",
  pages="117661--117661",
  doi="10.1016/j.energy.2020.117661",
  issn="0360-5442",
  url="https://www.sciencedirect.com/science/article/pii/S0360544220307684?via%3Dihub"
}