Consideration of stiffness of wall layers is decisive for patient-specific analysis of carotid artery with atheroma

Consideration of stiffness of wall layers is decisive for patient-specific analysis of carotid artery with atheroma

Článek WoS

The paper deals with the impact of chosen geometric and material factors on maximal stresses in carotid atherosclerotic plaque calculated using patient-specific finite element models. These stresses are believed to be decisive for the plaque vulnerability but all applied models suffer from inaccuracy of input data, especially when obtainedin vivoonly. One hundred computational models based onex vivoMRI are used to investigate the impact of wall thickness, MRI slice thickness, lipid core and fibrous tissue stiffness, and media anisotropy on the calculated peak plaque and peak cap stresses. The investigated factors are taken as continuous in the range based on published experimental results, only the impact of anisotropy is evaluated by comparison with a corresponding isotropic model. Design of Experiment concept is applied to assess the statistical significance of these investigated factors representing uncertainties in the input data of the model. The results show that consideration of realistic properties of arterial wall in the model is decisive for the stress evaluation; assignment of properties of fibrous tissue even to media and adventitia layers as done in some studies may induce up to eightfold overestimation of peak stress. The impact of MRI slice thickness may play a key role when local thin fibrous cap is present. Anisotropy of media layer is insignificant, and the stiffness of fibrous tissue and lipid core may become significant in some combinations.

The paper deals with the impact of chosen geometric and material factors on maximal stresses in carotid atherosclerotic plaque calculated using patient-specific finite element models. These stresses are believed to be decisive for the plaque vulnerability but all applied models suffer from inaccuracy of input data, especially when obtainedin vivoonly. One hundred computational models based onex vivoMRI are used to investigate the impact of wall thickness, MRI slice thickness, lipid core and fibrous tissue stiffness, and media anisotropy on the calculated peak plaque and peak cap stresses. The investigated factors are taken as continuous in the range based on published experimental results, only the impact of anisotropy is evaluated by comparison with a corresponding isotropic model. Design of Experiment concept is applied to assess the statistical significance of these investigated factors representing uncertainties in the input data of the model. The results show that consideration of realistic properties of arterial wall in the model is decisive for the stress evaluation; assignment of properties of fibrous tissue even to media and adventitia layers as done in some studies may induce up to eightfold overestimation of peak stress. The impact of MRI slice thickness may play a key role when local thin fibrous cap is present. Anisotropy of media layer is insignificant, and the stiffness of fibrous tissue and lipid core may become significant in some combinations.

BIAXIAL MECHANICAL-PROPERTIES; FIBROUS CAP THICKNESS; IN-VIVO; ATHEROSCLEROTIC PLAQUES; STRESS; MODEL; MICROCALCIFICATIONS; RESOLUTION; STRAIN; INTACT

BIAXIAL MECHANICAL-PROPERTIES; FIBROUS CAP THICKNESS; IN-VIVO; ATHEROSCLEROTIC PLAQUES; STRESS; MODEL; MICROCALCIFICATIONS; RESOLUTION; STRAIN; INTACT

LISICKÝ, O.; MALÁ, A.; BEDNAŘÍK, Z.; NOVOTNÝ, T.; BURŠA, J.

2021

29.09.2020

PLOS

1932-6203

PLoS One

15

9

Spojené státy americké

1

18

18

https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0239447

http://hdl.handle.net/11012/196570

pone.0239447