Detail publikačního výsledku

Shell-and-tube polymeric hollow fiber heat exchangers with parallel and crossed fibers

BARTULI, E.; KŮDELOVÁ, T.; RAUDENSKÝ, M.

Originální název

Shell-and-tube polymeric hollow fiber heat exchangers with parallel and crossed fibers

Anglický název

Shell-and-tube polymeric hollow fiber heat exchangers with parallel and crossed fibers

Druh

Článek WoS

Originální abstrakt

In this work shell-and-tube type polymeric hollow fibers heat exchangers (PHFHE) are described and investigated. These heat exchangers utilize polymeric micmchannels with outer diameter of 0.8 mm as the heat transfer surface. Heat exchangers are made of hundreds of such fibers, which are situated in the heat exchanger shell. The main purpose of this work was to conduct a comparative study of two PHFHE: the first one had parallel hollow fibers inside the shell; the second one is a new type of PHFHE having cross-wound structure where hollow fibers were placed at an angle to the heat exchanger axis. Due to the new developed method of separation hollow fibers inside the shell - cross-wound method it was possible to create an arranged structure of hollow fibers. Experimental results has shown that the overall heat transfer coefficient for PHFHE with cross-wound hollow fibers was about 6 times higher than for PHFHE with a parallel fibers at the same average shell water flow velocity. For a shell water velocity of 0.08 m/s the overall heat transfer coefficient for cross-wound PHFHE was equal to 1170 W/m(2)K at a water temperature inside hollow fiber of 11 degrees C and a shell water temperature of 70 degrees C.

Anglický abstrakt

In this work shell-and-tube type polymeric hollow fibers heat exchangers (PHFHE) are described and investigated. These heat exchangers utilize polymeric micmchannels with outer diameter of 0.8 mm as the heat transfer surface. Heat exchangers are made of hundreds of such fibers, which are situated in the heat exchanger shell. The main purpose of this work was to conduct a comparative study of two PHFHE: the first one had parallel hollow fibers inside the shell; the second one is a new type of PHFHE having cross-wound structure where hollow fibers were placed at an angle to the heat exchanger axis. Due to the new developed method of separation hollow fibers inside the shell - cross-wound method it was possible to create an arranged structure of hollow fibers. Experimental results has shown that the overall heat transfer coefficient for PHFHE with cross-wound hollow fibers was about 6 times higher than for PHFHE with a parallel fibers at the same average shell water flow velocity. For a shell water velocity of 0.08 m/s the overall heat transfer coefficient for cross-wound PHFHE was equal to 1170 W/m(2)K at a water temperature inside hollow fiber of 11 degrees C and a shell water temperature of 70 degrees C.

Klíčová slova

Polymeric heat exchanger; Shell-and-tube heat exchanger; Hollow fiber; Heat transfer coefficient; Structure optimization

Klíčová slova v angličtině

Polymeric heat exchanger; Shell-and-tube heat exchanger; Hollow fiber; Heat transfer coefficient; Structure optimization

Autoři

BARTULI, E.; KŮDELOVÁ, T.; RAUDENSKÝ, M.

Rok RIV

2021

Vydáno

05.01.2021

Nakladatel

PERGAMON-ELSEVIER SCIENCE LTD

Místo

OXFORD

ISSN

1359-4311

Periodikum

APPLIED THERMAL ENGINEERING

Svazek

182

Číslo

1

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1

Strany do

7

Strany počet

7

URL

https://www.sciencedirect.com/science/article/pii/S1359431120334827?dgcid=author

BibTex

@article{BUT165334,
  author="Erik {Bartuli} and Tereza {Kůdelová} and Miroslav {Raudenský}",
  title="Shell-and-tube polymeric hollow fiber heat exchangers with parallel and crossed fibers",
  journal="APPLIED THERMAL ENGINEERING",
  year="2021",
  volume="182",
  number="1",
  pages="1--7",
  doi="10.1016/j.applthermaleng.2020.116001",
  issn="1359-4311",
  url="https://www.sciencedirect.com/science/article/pii/S1359431120334827?dgcid=author"
}