Detail publikačního výsledku

Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand

ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; BÍLEK, V., Jr.; KOCÁB, D.

Originální název

Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand

Anglický název

Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

This paper is focused on the development of the physical, mechanical and fracture characteristics of alkali-activated slag (AAS) mortars during ageing. The two AAS mortars were selected for the purpose of the experiment. The difference was in a type of used sand: first mortar was made using the standardized siliceous sand with the maximum nominal grain size of 2 mm and the second mortar using the natural sand with a maximum grain size of 4 mm. The results of the elastic, fracture and strength parameters determined within the time interval of 3 to 330 days of ageing are summarized in the paper. All experimental results were evaluated for the prismatic specimens with dimensions of 40 × 40 × 160 mm and were expressed by the average value and sample standard deviation calculated from three independent measurements

Anglický abstrakt

This paper is focused on the development of the physical, mechanical and fracture characteristics of alkali-activated slag (AAS) mortars during ageing. The two AAS mortars were selected for the purpose of the experiment. The difference was in a type of used sand: first mortar was made using the standardized siliceous sand with the maximum nominal grain size of 2 mm and the second mortar using the natural sand with a maximum grain size of 4 mm. The results of the elastic, fracture and strength parameters determined within the time interval of 3 to 330 days of ageing are summarized in the paper. All experimental results were evaluated for the prismatic specimens with dimensions of 40 × 40 × 160 mm and were expressed by the average value and sample standard deviation calculated from three independent measurements

Klíčová slova

slag, alkali-activation, mortar, fracture

Klíčová slova v angličtině

slag, alkali-activation, mortar, fracture

Autoři

ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; BÍLEK, V., Jr.; KOCÁB, D.

Rok RIV

2021

Vydáno

05.03.2020

Nakladatel

EDP Sciences

Místo

France

Kniha

SPACE 2019

ISSN

2261-236X

Periodikum

MATEC web of conferences

Svazek

310

Stát

Francouzská republika

Strany od

1

Strany do

9

Strany počet

9

URL

https://www.matec-conferences.org/articles/matecconf/abs/2020/06/matecconf_space20_00021/matecconf_space20_00021.html

Plný text v Digitální knihovně

http://hdl.handle.net/11012/193481

BibTex

@inproceedings{BUT162766,
  author="Hana {Šimonová} and Barbara {Kucharczyková} and Vlastimil {Bílek} and Dalibor {Kocáb}",
  title="Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand",
  booktitle="SPACE 2019",
  year="2020",
  journal="MATEC web of conferences",
  volume="310",
  pages="1--9",
  publisher="EDP Sciences",
  address="France",
  doi="10.1051/matecconf/202031000021",
  issn="2274-7214",
  url="https://www.matec-conferences.org/articles/matecconf/abs/2020/06/matecconf_space20_00021/matecconf_space20_00021.html"
}

Dokumenty

matecconf_space20_00021