Detail publikačního výsledku

Influence of Class C Fly Ash on the Properties of Plastic Clay and Fired Brick Body

SOKOLÁŘ, R.; NGUYEN, M.

Originální název

Influence of Class C Fly Ash on the Properties of Plastic Clay and Fired Brick Body

Anglický název

Influence of Class C Fly Ash on the Properties of Plastic Clay and Fired Brick Body

Druh

Článek WoS

Originální abstrakt

Class C fly ash (CCFA) was used, according to ASTM C618-12a, as an admixture (10 %/w) in calcareous brick clay to determine the difference (in comparison with pure clay) in the clay body plasticity (CCFA increases the water content, decreases the drying shrinkage, drying sensitivity and bulk density of a green body) and in the properties of a fired body (since CCFA acts as a pore-forming agent, we can expect a lower bulk density and better thermal insulation). Due to low firing temperatures of the brick body (850 °C and 1000 °C), there is no risk of an anhydrite decomposition as Class C fly ash does not increase the SO2 content in flue gas during the firing and efflorescence.

Anglický abstrakt

Class C fly ash (CCFA) was used, according to ASTM C618-12a, as an admixture (10 %/w) in calcareous brick clay to determine the difference (in comparison with pure clay) in the clay body plasticity (CCFA increases the water content, decreases the drying shrinkage, drying sensitivity and bulk density of a green body) and in the properties of a fired body (since CCFA acts as a pore-forming agent, we can expect a lower bulk density and better thermal insulation). Due to low firing temperatures of the brick body (850 °C and 1000 °C), there is no risk of an anhydrite decomposition as Class C fly ash does not increase the SO2 content in flue gas during the firing and efflorescence.

Klíčová slova

fly ash; brick body; sulphur-dioxide emissions; firing

Klíčová slova v angličtině

fly ash; brick body; sulphur-dioxide emissions; firing

Autoři

SOKOLÁŘ, R.; NGUYEN, M.

Rok RIV

2021

Vydáno

17.02.2020

Nakladatel

Institute of Metals and Technology

Místo

Ljubljana, Slovenia

ISSN

1580-2949

Periodikum

Materiali in Tehnologije

Svazek

54

Číslo

1

Stát

Slovinská republika

Strany od

107

Strany do

111

Strany počet

5

URL

http://mit.imt.si/izvodi/mit201/sokolar.pdf

BibTex

@article{BUT162341,
  author="Radomír {Sokolář} and Martin {Nguyen}",
  title="Influence of Class C Fly Ash on the Properties of Plastic Clay and Fired Brick Body",
  journal="Materiali in Tehnologije",
  year="2020",
  volume="54",
  number="1",
  pages="107--111",
  doi="10.17222/mit.2019.148",
  issn="1580-2949",
  url="http://mit.imt.si/izvodi/mit201/sokolar.pdf"
}