Detail publikačního výsledku

Effect Of Heat Treatment On Mechanical Properties Of AlSi7Mg0,6 Aluminium Alloy Processed By SLM

VAVERKA, O.; ZABLOUDIL, J.; KOUTNÝ, D.; PANTĚLEJEV, L.; PALOUŠEK, D.; DOČEKALOVÁ, K.

Originální název

Effect Of Heat Treatment On Mechanical Properties Of AlSi7Mg0,6 Aluminium Alloy Processed By SLM

Anglický název

Effect Of Heat Treatment On Mechanical Properties Of AlSi7Mg0,6 Aluminium Alloy Processed By SLM

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

Due to specific conditions during the Selective Laser Melting (SLM) process such aslocal melting and solidification, high thermal gradients and repetitive thermal loading high residual stresses areinduced in the fabricated components. Thermal post processing aiming atrelieving residual stress from the component is necessary to prevent part distortion. Commonly used heat treatments for additively manufactured aluminium components are based on a simple annealing, which also significantly reduces mechanical properties such asproofstress or ultimate tensile strength. The paper presents a comparison of different ways of thermal post-processing of AlSi7Mg0.6 aluminium alloy fabricated by SLM. Cantilever specimens and tensile testing specimens were used to evaluate the effect of four different heat treatments. The positive effect of solution treatment with quenching and artificial ageing on strength properties with simultaneous induction of compressive residual stress in the top surface of the specimen is presented.

Anglický abstrakt

Due to specific conditions during the Selective Laser Melting (SLM) process such aslocal melting and solidification, high thermal gradients and repetitive thermal loading high residual stresses areinduced in the fabricated components. Thermal post processing aiming atrelieving residual stress from the component is necessary to prevent part distortion. Commonly used heat treatments for additively manufactured aluminium components are based on a simple annealing, which also significantly reduces mechanical properties such asproofstress or ultimate tensile strength. The paper presents a comparison of different ways of thermal post-processing of AlSi7Mg0.6 aluminium alloy fabricated by SLM. Cantilever specimens and tensile testing specimens were used to evaluate the effect of four different heat treatments. The positive effect of solution treatment with quenching and artificial ageing on strength properties with simultaneous induction of compressive residual stress in the top surface of the specimen is presented.

Klíčová slova

Selective Laser Melting; heat treatment; AlSi7Mg0,6 alloy; aluminium alloy; residual stress

Klíčová slova v angličtině

Selective Laser Melting; heat treatment; AlSi7Mg0,6 alloy; aluminium alloy; residual stress

Autoři

VAVERKA, O.; ZABLOUDIL, J.; KOUTNÝ, D.; PANTĚLEJEV, L.; PALOUŠEK, D.; DOČEKALOVÁ, K.

Rok RIV

2020

Vydáno

13.10.2019

Nakladatel

European Powder Metallurgy Association (EPMA)

Místo

Maastricht

ISBN

978-1-899072-51-4

Kniha

Euro PM2019 Proceedings

Strany od

1

Strany do

6

Strany počet

6

URL

https://www.europm2019.com/

Plný text v Digitální knihovně

http://hdl.handle.net/

BibTex

@inproceedings{BUT159446,
  author="Ondřej {Vaverka} and Jan {Zabloudil} and Daniel {Koutný} and Libor {Pantělejev} and David {Paloušek} and Kateřina {Dočekalová}",
  title="Effect Of Heat Treatment On Mechanical Properties Of AlSi7Mg0,6 Aluminium Alloy Processed By SLM",
  booktitle="Euro PM2019 Proceedings",
  year="2019",
  pages="1--6",
  publisher="European Powder Metallurgy Association (EPMA)",
  address="Maastricht",
  isbn="978-1-899072-51-4",
  url="https://www.europm2019.com/"
}