Detail publikačního výsledku

New Possible Way for Brazing of Thick Film Cermet Conductors

OTÁHAL, A.; SKÁCEL, J.; SZENDIUCH, I.

Originální název

New Possible Way for Brazing of Thick Film Cermet Conductors

Anglický název

New Possible Way for Brazing of Thick Film Cermet Conductors

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

The main aim of this work was to show a new approach in using brazing technology (hard soldering) on thick film conductors. Metallic leads and thick film conductors on alumina substrate were used to verify brazed joints. A flame and conductive heat transfer methods were used for brazing of three braze alloys such as Ag15CuP, Ag40Sn and Ag45CuZn. The tested pattern was made using silver (Ag) and silver-palladium (AgPd) thick film pastes on 96% Al2O3 substrate by screen printed technique and followed by firing process at temperature 850 °C. Nickel-silver and nickel-chromium-titanium leads were brazed on the thick film conductors with subsequent evaluation of the shear and the pull strength joints. The results of this work demonstrated very effective brazing technology on thick film conductors without usage of protective atmosphere or oven.

Anglický abstrakt

The main aim of this work was to show a new approach in using brazing technology (hard soldering) on thick film conductors. Metallic leads and thick film conductors on alumina substrate were used to verify brazed joints. A flame and conductive heat transfer methods were used for brazing of three braze alloys such as Ag15CuP, Ag40Sn and Ag45CuZn. The tested pattern was made using silver (Ag) and silver-palladium (AgPd) thick film pastes on 96% Al2O3 substrate by screen printed technique and followed by firing process at temperature 850 °C. Nickel-silver and nickel-chromium-titanium leads were brazed on the thick film conductors with subsequent evaluation of the shear and the pull strength joints. The results of this work demonstrated very effective brazing technology on thick film conductors without usage of protective atmosphere or oven.

Klíčová slova

Brazing, Thick films, Cermet, Resistance, Substrates, Conductors

Klíčová slova v angličtině

Brazing, Thick films, Cermet, Resistance, Substrates, Conductors

Autoři

OTÁHAL, A.; SKÁCEL, J.; SZENDIUCH, I.

Rok RIV

2020

Vydáno

26.08.2019

Nakladatel

IEEE

Kniha

42nd International Spring Seminar on Electronics Technology (ISSE)

ISSN

2161-2528

Periodikum

Conference proceedings (International Spring Seminar on Electronics Technology)

Stát

Spojené státy americké

Strany od

1

Strany do

5

Strany počet

5

URL

https://ieeexplore.ieee.org/document/8810246

BibTex

@inproceedings{BUT158362,
  author="Alexandr {Otáhal} and Josef {Skácel} and Ivan {Szendiuch}",
  title="New Possible Way for Brazing of Thick Film Cermet Conductors",
  booktitle="42nd International Spring Seminar on Electronics Technology (ISSE)",
  year="2019",
  journal="Conference proceedings (International Spring Seminar on Electronics Technology)",
  pages="1--5",
  publisher="IEEE",
  doi="10.1109/ISSE.2019.8810246",
  issn="2161-2528",
  url="https://ieeexplore.ieee.org/document/8810246"
}