Detail publikačního výsledku

Influence of Firing Regime and Potassium Ions on Synthetic Preparation of Belite Clinker

GAZDIČ, D.; FRIDRICHOVÁ, M.; DVOŘÁK, K.; HALEŠOVÁ, A.; VŠIANSKÝ, D.

Originální název

Influence of Firing Regime and Potassium Ions on Synthetic Preparation of Belite Clinker

Anglický název

Influence of Firing Regime and Potassium Ions on Synthetic Preparation of Belite Clinker

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

The study of the influence of selected temperature regime and potassium ions on the process of synthesis of belite (2CaO·SiO2, C2S) was carried out. The basic raw material was calcium carbonate (CaCO3) and amorphous silica (SiO2). The dosage of both components was based on the stoichiometric ratio of CaO:SiO2 in belite. The modification of the raw meal was carried out in the form of potash, K2O. Potash was dosed in the form of potassium carbonate, K2CO3, and potassium sulfate, K2SO4. The firing process was performed in a superkanthal furnace with two temperature modes, firing temperature: 1150 °C / 3 hours soaking and 1450 °C / 5 hours soaking. The evaluation performed by the experiment was based on mineralogical analysis by XRD analysis.

Anglický abstrakt

The study of the influence of selected temperature regime and potassium ions on the process of synthesis of belite (2CaO·SiO2, C2S) was carried out. The basic raw material was calcium carbonate (CaCO3) and amorphous silica (SiO2). The dosage of both components was based on the stoichiometric ratio of CaO:SiO2 in belite. The modification of the raw meal was carried out in the form of potash, K2O. Potash was dosed in the form of potassium carbonate, K2CO3, and potassium sulfate, K2SO4. The firing process was performed in a superkanthal furnace with two temperature modes, firing temperature: 1150 °C / 3 hours soaking and 1450 °C / 5 hours soaking. The evaluation performed by the experiment was based on mineralogical analysis by XRD analysis.

Klíčová slova

belite; temperature; potassium;

Klíčová slova v angličtině

belite; temperature; potassium;

Autoři

GAZDIČ, D.; FRIDRICHOVÁ, M.; DVOŘÁK, K.; HALEŠOVÁ, A.; VŠIANSKÝ, D.

Rok RIV

2020

Vydáno

19.08.2019

Nakladatel

Trans Tech Publications

Místo

Switzerland

ISBN

978-3-0357-1550-7

Kniha

Binders, Materials and Technologies in Modern construction V

Edice

2019

ISSN

1012-0394

Periodikum

Solid State Phenomena

Svazek

296

Stát

Švýcarská konfederace

Strany od

64

Strany do

69

Strany počet

6

URL

https://www.scientific.net/SSP.296.64

BibTex

@inproceedings{BUT157026,
  author="Dominik {Gazdič} and Marcela {Fridrichová} and Karel {Dvořák} and Adéla {Halešová} and Dalibor {Všianský}",
  title="Influence of Firing Regime and Potassium Ions on Synthetic Preparation of Belite Clinker",
  booktitle="Binders, Materials and Technologies in Modern construction V",
  year="2019",
  series="2019",
  journal="Solid State Phenomena",
  volume="296",
  number="296",
  pages="64--69",
  publisher="Trans Tech Publications",
  address="Switzerland",
  doi="10.4028/www.scientific.net/SSP.296.64",
  isbn="978-3-0357-1550-7",
  issn="1012-0394",
  url="https://www.scientific.net/SSP.296.64"
}