Detail publikačního výsledku

Silicate Sprayed Mixture Based on Secondary Raw Materials

FIGALA, P.; DROCHYTKA, R.; HERMANN, R.; KOLÍSKO, J.

Originální název

Silicate Sprayed Mixture Based on Secondary Raw Materials

Anglický název

Silicate Sprayed Mixture Based on Secondary Raw Materials

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

This paper studies the fundamental research and development of sprayed cement-based mixture designed to withstand the chemically aggressive conditions. The aim of this paper is to verify the possibilities of usage of suitable secondary raw materials as a substitution of a binder and filler of the original mixture while preserving or improving the physical-mechanical properties. In this part of the research was studied the possibility to substitute the binder in rate of 20-60 wt.% by high temperature fly ash and the whole filler by foundry sand and slag. Test samples were made from nine recipes, in which was monitored the influence of secondary raw materials on the compressive strength and the water absorption after 28 days of curing. The results of this paper show, it is possible to successfully substitute part of the binder by high temperature fly ash and the filler wholly by foundry sand in the sprayed mixture. These optimized recipes showed positive influence mainly in the long-term on mechanical properties.

Anglický abstrakt

This paper studies the fundamental research and development of sprayed cement-based mixture designed to withstand the chemically aggressive conditions. The aim of this paper is to verify the possibilities of usage of suitable secondary raw materials as a substitution of a binder and filler of the original mixture while preserving or improving the physical-mechanical properties. In this part of the research was studied the possibility to substitute the binder in rate of 20-60 wt.% by high temperature fly ash and the whole filler by foundry sand and slag. Test samples were made from nine recipes, in which was monitored the influence of secondary raw materials on the compressive strength and the water absorption after 28 days of curing. The results of this paper show, it is possible to successfully substitute part of the binder by high temperature fly ash and the filler wholly by foundry sand in the sprayed mixture. These optimized recipes showed positive influence mainly in the long-term on mechanical properties.

Klíčová slova

Secondary raw material, sprayed mixture, fly ash, slag, foundry sand, substitution, cement

Klíčová slova v angličtině

Secondary raw material, sprayed mixture, fly ash, slag, foundry sand, substitution, cement

Autoři

FIGALA, P.; DROCHYTKA, R.; HERMANN, R.; KOLÍSKO, J.

Rok RIV

2020

Vydáno

21.06.2019

Nakladatel

Trans Tech Publications Ltd

Místo

Switzerland

ISBN

978-3-0357-1492-0

Kniha

Key Engineering Materials

ISSN

1013-9826

Periodikum

Key Engineering Materials (print)

Svazek

808

Stát

Švýcarská konfederace

Strany od

129

Strany do

135

Strany počet

7

URL

https://www.scientific.net/KEM.808.129

BibTex

@inproceedings{BUT156978,
  author="Petr {Figala} and Rostislav {Drochytka} and Radek {Hermann} and Jiří {Kolísko}",
  title="Silicate Sprayed Mixture Based on Secondary Raw Materials",
  booktitle="Key Engineering Materials",
  year="2019",
  journal="Key Engineering Materials (print)",
  volume="808",
  pages="129--135",
  publisher="Trans Tech Publications Ltd",
  address="Switzerland",
  doi="10.4028/www.scientific.net/KEM.808.129",
  isbn="978-3-0357-1492-0",
  issn="1013-9826",
  url="https://www.scientific.net/KEM.808.129"
}