Detail publikace

Comparison of the effect of different additives on acoustic emission parameters obtained during three-point bending tests of alkali-activated slag composites

TOPOLÁŘ, L. ROVNANÍK, P. SCHMID, P.

Originální název

Comparison of the effect of different additives on acoustic emission parameters obtained during three-point bending tests of alkali-activated slag composites

Typ

abstrakt

Jazyk

angličtina

Originální abstrakt

The development of failure in quazi-brittle materials is associated with the formation of microcracks, which is followed by the release of energy in the form of elastic ultrasonic waves. The acoustic emission method is an effective non-destructive method for the detection and determination of different damage mechanisms not only in composite materials. This experimental work presents results from the acoustic emission measurements obtained during three-point bending tests without the central notch on alkali-activated materials with various additives. The acoustic emission activity was monitored using piezoelectric sensors, and the way of damage based on parameters of acoustic emission signals was investigated. The preliminary results showed that the addition of carbon black significantly reduced the maximal stress, whereas the addition of graphite increased the brittleness of the alkali-activated material. The higher brittleness is determined by the lower number of overshoots of acoustic emission signals before the fracture of the specimens.

Klíčová slova

acoustic emission method; alkali-activated material; three-point bending test; microcrack; failure

Autoři

TOPOLÁŘ, L.; ROVNANÍK, P.; SCHMID, P.

Vydáno

8. 7. 2018

Nakladatel

Elsevier

Strany od

12

Strany do

12

Strany počet

1

BibTex

@misc{BUT151982,
  author="Libor {Topolář} and Pavel {Rovnaník} and Pavel {Schmid}",
  title="Comparison of the effect of different additives on acoustic emission parameters obtained during three-point bending tests of alkali-activated slag composites",
  year="2018",
  pages="12--12",
  publisher="Elsevier",
  note="abstract"
}