Software for passive network synthesis from two-terminal measured impedance characteristic

Software for passive network synthesis from two-terminal measured impedance characteristic

Software

This software was developed for a linear lumped-element circuit model calculation of a two-terminal measured impedance frequency characteristic. The linear lumped element model is extracted by an improved element-by-element extraction method. This extraction method is extended to series and shunt resistors extractions. The extracted circuit model from measured two-terminal impedance characteristic can be used for a printed circuit board (PCB) modeling and for more accurate electromagnetic compatibility (EMC) simulations of integrated circuits including external passive networks.

This software was developed for a linear lumped-element circuit model calculation of a two-terminal measured impedance frequency characteristic. The linear lumped element model is extracted by an improved element-by-element extraction method. This extraction method is extended to series and shunt resistors extractions. The extracted circuit model from measured two-terminal impedance characteristic can be used for a printed circuit board (PCB) modeling and for more accurate electromagnetic compatibility (EMC) simulations of integrated circuits including external passive networks.

Circuit modeling, element-by-element extraction, EMC, passive network synthesis, lumped-element model, transmission line

Circuit modeling, element-by-element extraction, EMC, passive network synthesis, lumped-element model, transmission line

ON Design Czech, s.r.o., Videnska 204/125, 619 00 Brno, Czech Republic

K využití výsledku jiným subjektem je vždy nutné nabytí licence

https://www.vutbr.cz/www_base/vutdisk.php?i=141562ae71

ImpedanceSynthesisSW_EN_DKrolak