Detail publikačního výsledku

Experimental determination of the initial compressive strength of concrete using a rebound test hammer

CIKRLE, P.; KOCÁB, D.; MISÁK, P.

Originální název

Experimental determination of the initial compressive strength of concrete using a rebound test hammer

Anglický název

Experimental determination of the initial compressive strength of concrete using a rebound test hammer

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

This paper deals with rebound hammer testing of concrete in the early stage of ageing. Six types of concrete were produced for the purpose of the presented experiment and differed in the water/cement ratio and were otherwise identical as to the input components. SilverSchmidt PC L test hammer was used to determine the rebound coefficient Q and compressive strength of cube test specimens. The aim of the experiment was to verify the possibility of creating a conversion relationship between the determined parameter of the used non-destructive method and the real compressive strength of concrete in the first days of ageing of concrete. Based on the conducted experiment, it may be stated that the SilverSchmidt PC L test hammer with a mushroom plunger is a suitable instrument for determining the initial compressive strength of concrete, starting from the value of about 5 N/mm2. An important conclusion is the fact that it is possible to create a regression model with relatively high accuracy, in this case approximately ± 3 N/mm2.

Anglický abstrakt

This paper deals with rebound hammer testing of concrete in the early stage of ageing. Six types of concrete were produced for the purpose of the presented experiment and differed in the water/cement ratio and were otherwise identical as to the input components. SilverSchmidt PC L test hammer was used to determine the rebound coefficient Q and compressive strength of cube test specimens. The aim of the experiment was to verify the possibility of creating a conversion relationship between the determined parameter of the used non-destructive method and the real compressive strength of concrete in the first days of ageing of concrete. Based on the conducted experiment, it may be stated that the SilverSchmidt PC L test hammer with a mushroom plunger is a suitable instrument for determining the initial compressive strength of concrete, starting from the value of about 5 N/mm2. An important conclusion is the fact that it is possible to create a regression model with relatively high accuracy, in this case approximately ± 3 N/mm2.

Klíčová slova

Concrete;initial compressive strength;rebound test hammer;non-destructive testing

Klíčová slova v angličtině

Concrete;initial compressive strength;rebound test hammer;non-destructive testing

Autoři

CIKRLE, P.; KOCÁB, D.; MISÁK, P.

Rok RIV

2019

Vydáno

16.07.2018

Nakladatel

IOP Publishing

Místo

Bristol

Kniha

Construmat 2018

ISSN

1757-8981

Periodikum

IOP Conference Series: Materials Science and Engineering

Svazek

385

Číslo

1

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1

Strany do

6

Strany počet

6

URL

http://iopscience.iop.org/article/10.1088/1757-899X/385/1/012008

Plný text v Digitální knihovně

http://hdl.handle.net/11012/137116

BibTex

@inproceedings{BUT148844,
  author="Petr {Cikrle} and Dalibor {Kocáb} and Petr {Misák}",
  title="Experimental determination of the initial compressive strength of concrete using a rebound test hammer",
  booktitle="Construmat 2018",
  year="2018",
  journal="IOP Conference Series: Materials Science and Engineering",
  volume="385",
  number="1",
  pages="1--6",
  publisher="IOP Publishing",
  address="Bristol",
  doi="10.1088/1757-899X/385/1/012008",
  issn="1757-8981",
  url="http://iopscience.iop.org/article/10.1088/1757-899X/385/1/012008"
}

Dokumenty

Cikrle_2018_IOP_Conf._Ser.__Mater._Sci._Eng._385_012008