Detail publikačního výsledku

Transmission error analysis for heavy-duty gearbox

KUČERA, P.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K.

Originální název

Transmission error analysis for heavy-duty gearbox

Anglický název

Transmission error analysis for heavy-duty gearbox

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

This paper deals with an analysis of the transmission error. For this purpose, the measuring loop was assembled from two gear boxes. Subsequently, angles, torque and shaft speed were set or measured. For the evaluation a calculation method was used and the impact of the different transmitted torque was evaluated. The measuring loop enables to test at different operation conditions of torque and shaft rotation direction. In this paper, the static transmission error analysis for braking mode at 50 rpm shaft speed and torque range from 600 to 2400 Nm is described.

Anglický abstrakt

This paper deals with an analysis of the transmission error. For this purpose, the measuring loop was assembled from two gear boxes. Subsequently, angles, torque and shaft speed were set or measured. For the evaluation a calculation method was used and the impact of the different transmitted torque was evaluated. The measuring loop enables to test at different operation conditions of torque and shaft rotation direction. In this paper, the static transmission error analysis for braking mode at 50 rpm shaft speed and torque range from 600 to 2400 Nm is described.

Klíčová slova

transmission error, gearbox, Matlab, measurement, torque, tooth

Klíčová slova v angličtině

transmission error, gearbox, Matlab, measurement, torque, tooth

Autoři

KUČERA, P.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K.

Rok RIV

2019

Vydáno

22.05.2018

Nakladatel

JVE Intenational

Místo

Kaunas, Lithuania

Kniha

Vibroengineering PROCEDIA

ISSN

2345-0533

Periodikum

Vibroengineering Procedia

Svazek

18

Číslo

1

Stát

Litevská republika

Strany od

113

Strany do

116

Strany počet

4

URL

https://www.jvejournals.com/article/19919/

Plný text v Digitální knihovně

http://hdl.handle.net/11012/84191

BibTex

@inproceedings{BUT147700,
  author="Pavel {Kučera} and Václav {Píštěk} and Aleš {Prokop} and Kamil {Řehák}",
  title="Transmission error analysis for heavy-duty gearbox",
  booktitle="Vibroengineering PROCEDIA",
  year="2018",
  journal="Vibroengineering Procedia",
  volume="18",
  number="1",
  pages="113--116",
  publisher="JVE Intenational",
  address="Kaunas, Lithuania",
  doi="10.21595/vp.2018.19919",
  issn="2345-0533",
  url="https://www.jvejournals.com/article/19919/"
}

Dokumenty

VP-18-19919