Detail publikačního výsledku

The use of numerical simulation for the evaluation of special transparent glass resistance

BINAR, T.; ŠVARC, J.; VYROUBAL, P.; KAZDA, T.; ROLC, S.; DVOŘÁK, A.; DOSTÁL, P.

Originální název

The use of numerical simulation for the evaluation of special transparent glass resistance

Anglický název

The use of numerical simulation for the evaluation of special transparent glass resistance

Druh

Článek WoS

Originální abstrakt

The paper is concerned with the use of numerical simulation for the evaluation of projectile interaction with an assembly composed of multiple materials (transparent armour). For the purpose of assessing the reliability of theoretical numerical models, LS-Dyna explicit solver was employed allowing the evaluation of the projectile interaction effect on the experiment material tested. The material parameters for the numerical simulations were obtained at the temperature of 20 °C. The research objective was to evaluate the projectile interaction with an assembly composed of multiple materials at the temperatures of -32 °C and 55 °C, and to evaluate the scope of damage, the delamination of individual layers of transparent armour and the depth of projectile penetration at Protection Level 2 [PARTIAL] (7.62 mm x 39 API BZ) a Level 3 (only projectile 7.62 mm x 54R B32 API).

Anglický abstrakt

The paper is concerned with the use of numerical simulation for the evaluation of projectile interaction with an assembly composed of multiple materials (transparent armour). For the purpose of assessing the reliability of theoretical numerical models, LS-Dyna explicit solver was employed allowing the evaluation of the projectile interaction effect on the experiment material tested. The material parameters for the numerical simulations were obtained at the temperature of 20 °C. The research objective was to evaluate the projectile interaction with an assembly composed of multiple materials at the temperatures of -32 °C and 55 °C, and to evaluate the scope of damage, the delamination of individual layers of transparent armour and the depth of projectile penetration at Protection Level 2 [PARTIAL] (7.62 mm x 39 API BZ) a Level 3 (only projectile 7.62 mm x 54R B32 API).

Klíčová slova

Visco-plasticity, Fringe level, Numerical simulation, Transparent armour life cycle, Projectile

Klíčová slova v angličtině

Visco-plasticity, Fringe level, Numerical simulation, Transparent armour life cycle, Projectile

Autoři

BINAR, T.; ŠVARC, J.; VYROUBAL, P.; KAZDA, T.; ROLC, S.; DVOŘÁK, A.; DOSTÁL, P.

Rok RIV

2019

Vydáno

14.04.2018

Nakladatel

Elsevier

ISSN

1350-6307

Periodikum

Engineering Failure Analysis

Svazek

91

Číslo

1

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1

Strany do

10

Strany počet

10

URL

https://www.sciencedirect.com/science/article/pii/S1350630717309974

Plný text v Digitální knihovně

http://hdl.handle.net/11012/186776

BibTex

@article{BUT146942,
  author="Tomáš {Binar} and Jiří {Švarc} and Petr {Vyroubal} and Tomáš {Kazda} and Stanislav {Rolc} and Aleš {Dvořák} and Petr {Dostál}",
  title="The use of numerical simulation for the evaluation of special transparent glass resistance",
  journal="Engineering Failure Analysis",
  year="2018",
  volume="91",
  number="1",
  pages="1--10",
  doi="10.1016/j.engfailanal.2018.04.014",
  issn="1350-6307",
  url="https://www.sciencedirect.com/science/article/pii/S1350630717309974"
}

Dokumenty

1-s2.0-S1350630717309974-main
numerical-simulation-vut