Detail publikačního výsledku

Influence of conditions on the process of high voltage material synthesis

KAZDA, T.; TICHÝ, J.; ČECH, O.; SEDLAŘÍKOVÁ, M.; ČUDEK, P.; BINAR, T.; ŠVARC, J.

Originální název

Influence of conditions on the process of high voltage material synthesis

Anglický název

Influence of conditions on the process of high voltage material synthesis

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

For advanced applications, such as electric vehicles, it is necessary to achieve high battery pack voltage reaching hundreds of volts and high capacity at the same time. These requirements should be meet by new accumulators based on high-voltage cathode materials with their voltage close to 5 V rather than by currently used Li-Ion accumulators. Due to higher working voltages of these materials, the number of cells required to achieve the desired voltage is lower, thereby the battery pack is smaller and lighter. For good operation of these materials, their synthesis must be accurate. This paper deals with the influence of used gas in the oven chamber during the synthesis of high voltage spinel cathode material LiNi0.5Mn1.5O4. Final materials were studied using XRD analysis.

Anglický abstrakt

For advanced applications, such as electric vehicles, it is necessary to achieve high battery pack voltage reaching hundreds of volts and high capacity at the same time. These requirements should be meet by new accumulators based on high-voltage cathode materials with their voltage close to 5 V rather than by currently used Li-Ion accumulators. Due to higher working voltages of these materials, the number of cells required to achieve the desired voltage is lower, thereby the battery pack is smaller and lighter. For good operation of these materials, their synthesis must be accurate. This paper deals with the influence of used gas in the oven chamber during the synthesis of high voltage spinel cathode material LiNi0.5Mn1.5O4. Final materials were studied using XRD analysis.

Klíčová slova

Li-Ion battery, cathode materials, high voltage material

Klíčová slova v angličtině

Li-Ion battery, cathode materials, high voltage material

Autoři

KAZDA, T.; TICHÝ, J.; ČECH, O.; SEDLAŘÍKOVÁ, M.; ČUDEK, P.; BINAR, T.; ŠVARC, J.

Rok RIV

2018

Vydáno

10.09.2017

Nakladatel

Brno University of Technology

Místo

Brno

ISBN

978 80 214 5529 0

Kniha

Advanced Batteries Accumulators and Fuel Cells – 18th ABAF

Strany od

79

Strany do

80

Strany počet

2

BibTex

@inproceedings{BUT140274,
  author="Tomáš {Kazda} and Jiří {Tichý} and Ondřej {Čech} and Marie {Sedlaříková} and Pavel {Čudek} and Tomáš {Binar} and Jiří {Švarc}",
  title="Influence of conditions on the process of high voltage material synthesis",
  booktitle="Advanced Batteries Accumulators and Fuel Cells – 18th ABAF",
  year="2017",
  pages="79--80",
  publisher="Brno University of Technology",
  address="Brno",
  isbn="978 80 214 5529 0"
}