Detail publikačního výsledku

Verification of prediction method for energy consumption of machine tool feed axes

TŮMA, J.; TŮMA, Z.; SYNEK, M.

Originální název

Verification of prediction method for energy consumption of machine tool feed axes

Anglický název

Verification of prediction method for energy consumption of machine tool feed axes

Druh

Článek Scopus

Originální abstrakt

Energy efficiency of electrical appliances is highly debated topic at present. This topic is transferred especially in industries where are the effects of savings much more significant due to higher energy consumption. In the case of machine tools is at present energy efficiency also a hot topic, based on the Kyoto Protocol and the European Commission Regulation of energy appliances eco-design. Machine tool manufacturers already responses to this situation by using more efficient components (motors, pumps, etc…).This article focuses especially on determining the energy profile of the machine tool at the moment where the machine is not manufactured. It is used a method allows to simulate the energy profile of the machine tool. This is verified by measurement on the test device. Realized measurement was done under different loads of clamping table and under different feed rates. Average percentual error was achieved below ten percent limit.

Anglický abstrakt

Energy efficiency of electrical appliances is highly debated topic at present. This topic is transferred especially in industries where are the effects of savings much more significant due to higher energy consumption. In the case of machine tools is at present energy efficiency also a hot topic, based on the Kyoto Protocol and the European Commission Regulation of energy appliances eco-design. Machine tool manufacturers already responses to this situation by using more efficient components (motors, pumps, etc…).This article focuses especially on determining the energy profile of the machine tool at the moment where the machine is not manufactured. It is used a method allows to simulate the energy profile of the machine tool. This is verified by measurement on the test device. Realized measurement was done under different loads of clamping table and under different feed rates. Average percentual error was achieved below ten percent limit.

Klíčová slova

Energy efficiency; Feed axis; Machine tool; Simulation; Verification

Klíčová slova v angličtině

Energy efficiency; Feed axis; Machine tool; Simulation; Verification

Autoři

TŮMA, J.; TŮMA, Z.; SYNEK, M.

Rok RIV

2017

Vydáno

06.09.2016

Nakladatel

MM publishing Ltd.

Místo

Brno

ISSN

1803-1269

Periodikum

MM Science Journal

Číslo

1

Stát

Česká republika

Strany od

1634

Strany do

1638

Strany počet

5

URL

https://www.scopus.com/record/display.uri?eid=2-s2.0-85006324097&origin=resultslist&sort=plf-f&src=s&st1=Verification+of+prediction+method+for+energy+consumption+of+machine+tool+feed+axes&st2=&sid=947449BCFDAF774E2B67778FF1C0F113.wsnAw8kcdt7IPYLO0V48gA%3a290&sot=b&sdt=b&sl=97&s=TITLE-ABS-KEY%28Verification+of+prediction+method+for+energy+consumption+of+machine+tool+feed+axes%29&relpos=0&citeCnt=0&searchTerm=

Plný text v Digitální knihovně

http://hdl.handle.net/11012/63779

BibTex

@article{BUT131180,
  author="Jiří {Tůma} and Zdeněk {Tůma} and Miloš {Synek}",
  title="Verification of prediction method for energy consumption of machine tool feed axes",
  journal="MM Science Journal",
  year="2016",
  number="1",
  pages="1634--1638",
  doi="10.17973/MMSJ.2016\{_}12\{_}2016201",
  issn="1803-1269",
  url="https://www.scopus.com/record/display.uri?eid=2-s2.0-85006324097&origin=resultslist&sort=plf-f&src=s&st1=Verification+of+prediction+method+for+energy+consumption+of+machine+tool+feed+axes&st2=&sid=947449BCFDAF774E2B67778FF1C0F113.wsnAw8kcdt7IPYLO0V48gA%3a290&sot=b&sdt=b&sl=97&s=TITLE-ABS-KEY%28Verification+of+prediction+method+for+energy+consumption+of+machine+tool+feed+axes%29&relpos=0&citeCnt=0&searchTerm="
}

Dokumenty

fullpaper
MM_Science_2016201