Detail publikačního výsledku

DAMAGE IDENTIFICATION OF PNEUMATIC COMPONENTS BY ACOUSTIC EMISSION

MAHMOUD, H.; VLAŠIC, F.; MAZAL, P.; JÁNA, M.

Originální název

DAMAGE IDENTIFICATION OF PNEUMATIC COMPONENTS BY ACOUSTIC EMISSION

Anglický název

DAMAGE IDENTIFICATION OF PNEUMATIC COMPONENTS BY ACOUSTIC EMISSION

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

The main aim of this paper is to find a typical acoustic emission signal associated with a particular type of damage in the cylinder. Currently, condition monitoring of the pneumatic systems are mainly based on vibration monitoring, ultrasound principle and noise analysis of the equipment. However, the capabilities of these methods are insufficient, less sensitive and unreliable. The acoustic emission signals, are obtained from the undamaged cylinders, were processed and analysed, after that the same cylinders were damaged with different type of defects. A new parameter "DAE", which was developed, evaluates and classifies the level of damage detection on the basis of the recorded differences between the undamaged and damaged cylinder. An evaluation of the cylinder cycling during idle motion is a part of the results. This study follows previous papers focused on the development of a new system for condition monitoring of pneumatic components supported by the Technology Agency of the Czech Republic.

Anglický abstrakt

The main aim of this paper is to find a typical acoustic emission signal associated with a particular type of damage in the cylinder. Currently, condition monitoring of the pneumatic systems are mainly based on vibration monitoring, ultrasound principle and noise analysis of the equipment. However, the capabilities of these methods are insufficient, less sensitive and unreliable. The acoustic emission signals, are obtained from the undamaged cylinders, were processed and analysed, after that the same cylinders were damaged with different type of defects. A new parameter "DAE", which was developed, evaluates and classifies the level of damage detection on the basis of the recorded differences between the undamaged and damaged cylinder. An evaluation of the cylinder cycling during idle motion is a part of the results. This study follows previous papers focused on the development of a new system for condition monitoring of pneumatic components supported by the Technology Agency of the Czech Republic.

Klíčová slova

condition monitoring; pneumatic cylinder; damage; acoustic emission

Klíčová slova v angličtině

condition monitoring; pneumatic cylinder; damage; acoustic emission

Autoři

MAHMOUD, H.; VLAŠIC, F.; MAZAL, P.; JÁNA, M.

Rok RIV

2017

Vydáno

07.09.2016

Nakladatel

VUTIUM Brno, Brno University of Technology

Místo

Brno

ISBN

978-80-214-5386-9

Kniha

32nd European Conference on Acoustic Emission Testing

Edice

1st edition

Strany od

315

Strany do

322

Strany počet

8

URL

http://cndt.cz/ewgae2016/

BibTex

@inproceedings{BUT129959,
  author="Houssam {Mahmoud} and František {Vlašic} and Pavel {Mazal} and Miroslav {Jána}",
  title="DAMAGE IDENTIFICATION OF PNEUMATIC COMPONENTS BY ACOUSTIC EMISSION",
  booktitle="32nd European Conference on Acoustic Emission Testing",
  year="2016",
  series="1st edition",
  pages="315--322",
  publisher="VUTIUM Brno, Brno University of Technology",
  address="Brno",
  isbn="978-80-214-5386-9",
  url="http://cndt.cz/ewgae2016/"
}