Detail publikačního výsledku

Preparation of Metallographic Samples with Anodizing Layers

REMEŠOVÁ, M.; KLAKURKOVÁ, L.; HORYNOVÁ, M.; ČELKO, L.; KAISER, J.

Originální název

Preparation of Metallographic Samples with Anodizing Layers

Anglický název

Preparation of Metallographic Samples with Anodizing Layers

Druh

Abstrakt

Originální abstrakt

Anodization is an electrochemical process that converts the metal surface into a wear/corrosion resistant, dielectric oxide layer. The thickness of the resulting layer depend on the working parameters (voltage, current, type of electrolyte, concentration and temperature of the electrolyte, etc.). In this work the preparation of zinc metallographic samples with anodic layer is described. Samples by prepared anodic oxidation on the zinc substrate are rather brittle and porous. During the mounting, cutting, grinding and polishing, the layer can be deformed/delaminated and determination of the thickness is distorted. The problem is to determine the boundary between the anodic layer and resin. The resulting anodic layer thickness were measured by optical microscopy and scanning electron microscopy (SEM).

Anglický abstrakt

Anodization is an electrochemical process that converts the metal surface into a wear/corrosion resistant, dielectric oxide layer. The thickness of the resulting layer depend on the working parameters (voltage, current, type of electrolyte, concentration and temperature of the electrolyte, etc.). In this work the preparation of zinc metallographic samples with anodic layer is described. Samples by prepared anodic oxidation on the zinc substrate are rather brittle and porous. During the mounting, cutting, grinding and polishing, the layer can be deformed/delaminated and determination of the thickness is distorted. The problem is to determine the boundary between the anodic layer and resin. The resulting anodic layer thickness were measured by optical microscopy and scanning electron microscopy (SEM).

Klíčová slova

zinc; anodizing; zinc oxide; measure thickness

Klíčová slova v angličtině

zinc; anodizing; zinc oxide; measure thickness

Autoři

REMEŠOVÁ, M.; KLAKURKOVÁ, L.; HORYNOVÁ, M.; ČELKO, L.; KAISER, J.

Rok RIV

2017

Vydáno

19.04.2016

Nakladatel

Faculty of Metallurgy Technical University of Košice

Místo

Košice

ISBN

978-80-553-2547-7

Kniha

Metallography ´16

Strany od

133

Strany do

133

Strany počet

1

BibTex

@misc{BUT127036,
  author="Michaela {Remešová} and Lenka {Klakurková} and Miroslava {Horynová} and Ladislav {Čelko} and Jozef {Kaiser}",
  title="Preparation of Metallographic Samples with Anodizing Layers",
  booktitle="Metallography ´16",
  year="2016",
  edition="1",
  pages="133--133",
  publisher="Faculty of Metallurgy Technical University of Košice",
  address="Košice",
  isbn="978-80-553-2547-7",
  note="Abstract"
}