Detail publikačního výsledku

Analysis of Machine Tool Spindles under Load

HOLUB, M.; VETIŠKA, J.; KNOBLOCH, J.; MINÁŘ, P.

Originální název

Analysis of Machine Tool Spindles under Load

Anglický název

Analysis of Machine Tool Spindles under Load

Druh

Článek recenzovaný mimo WoS a Scopus

Originální abstrakt

This paper deals with a new experimental approach to the analysis of radial, axial, and tilt error movements of machine tool spindles under load. The main focus is on the identification of error spindle movements under different machine operation conditions between 500 - 5000 rev / min and loads in the range of 50 - 500 N. Errors of the spindle movements are measured on the cylindrical workpiece using capacitance sensors for different loads. The analysis of measurements of radial, axial, and tilt error movements of machine tool spindle indicates a dependency of loads and measured errors. The integration of error measurements into novel multi-body dynamic models of machine tool spindles is very important for prediction of machine behaviour during a cutting process and for prediction of workpiece geometric accuracy.

Anglický abstrakt

This paper deals with a new experimental approach to the analysis of radial, axial, and tilt error movements of machine tool spindles under load. The main focus is on the identification of error spindle movements under different machine operation conditions between 500 - 5000 rev / min and loads in the range of 50 - 500 N. Errors of the spindle movements are measured on the cylindrical workpiece using capacitance sensors for different loads. The analysis of measurements of radial, axial, and tilt error movements of machine tool spindle indicates a dependency of loads and measured errors. The integration of error measurements into novel multi-body dynamic models of machine tool spindles is very important for prediction of machine behaviour during a cutting process and for prediction of workpiece geometric accuracy.

Klíčová slova

Spindle error, Machine tool, Multi-body model, Measurement

Klíčová slova v angličtině

Spindle error, Machine tool, Multi-body model, Measurement

Autoři

HOLUB, M.; VETIŠKA, J.; KNOBLOCH, J.; MINÁŘ, P.

Rok RIV

2017

Vydáno

11.01.2016

Nakladatel

Trans Tech Publications

Místo

Switzerland

ISSN

1662-7482

Periodikum

Applied Mechanics and Materials

Svazek

2016

Číslo

821

Stát

Švýcarská konfederace

Strany od

608

Strany do

613

Strany počet

6

Plný text v Digitální knihovně

http://hdl.handle.net/

BibTex

@article{BUT119127,
  author="Michal {Holub} and Jan {Vetiška} and Josef {Knobloch} and Petr {Minář}",
  title="Analysis of Machine Tool Spindles under Load",
  journal="Applied Mechanics and Materials",
  year="2016",
  volume="2016",
  number="821",
  pages="608--613",
  doi="10.4028/www.scientific.net/AMM.821.608",
  issn="1662-7482"
}