Detail publikačního výsledku

Sintering of feldspar rocks from czech quarries

SOKOLÁŘ, R.; VODOVÁ, L.

Originální název

Sintering of feldspar rocks from czech quarries

Anglický název

Sintering of feldspar rocks from czech quarries

Druh

Článek WoS

Originální abstrakt

Sintering behaviour as dependence of water absorption, flexural strength and firing shrinkage of dry pressed test samples made from three different types of feldspar rocks on the firing temperature (11201300° C) was determined. Potassium, potassiumsodium and sodium-calcium industrially milled feldspars with similar granulometry according to equivalent mean spherical diameter of the grains d(0.5) in the range of 16.620.8 ¯m were used. The sintering process was described according to changes in mineralogical composition of the fired test samples too. During the sintering process, feldspars gradually disappear in phasesfirst of all alkali feldspars (albite, microcline); anorthite (calcium feldspar) is more resistant to melting thanks to its higher melting temperature and it increases the sintering temperature of feldspar. Sodium-potassium feldspar Z43NaK50 with the lowest content of alkalis (3.35% of K2O and 2.67% of Na2O) and the highest equivalent mean spherical diameter d(0.5) showed the most intensive sintering activity. An explanation of this unexpected fact can be found in the equilibrium phase diagrams and in the formation of low melting eutectic mixtures.

Anglický abstrakt

Sintering behaviour as dependence of water absorption, flexural strength and firing shrinkage of dry pressed test samples made from three different types of feldspar rocks on the firing temperature (11201300° C) was determined. Potassium, potassiumsodium and sodium-calcium industrially milled feldspars with similar granulometry according to equivalent mean spherical diameter of the grains d(0.5) in the range of 16.620.8 ¯m were used. The sintering process was described according to changes in mineralogical composition of the fired test samples too. During the sintering process, feldspars gradually disappear in phasesfirst of all alkali feldspars (albite, microcline); anorthite (calcium feldspar) is more resistant to melting thanks to its higher melting temperature and it increases the sintering temperature of feldspar. Sodium-potassium feldspar Z43NaK50 with the lowest content of alkalis (3.35% of K2O and 2.67% of Na2O) and the highest equivalent mean spherical diameter d(0.5) showed the most intensive sintering activity. An explanation of this unexpected fact can be found in the equilibrium phase diagrams and in the formation of low melting eutectic mixtures.

Klíčová slova

Feldspars, Sintering, Water absorption, Mineralogical composition

Klíčová slova v angličtině

Feldspars, Sintering, Water absorption, Mineralogical composition

Autoři

SOKOLÁŘ, R.; VODOVÁ, L.

Rok RIV

2016

Vydáno

20.01.2015

Nakladatel

Ceramic Society of japan

Místo

Japan

ISSN

1882-0743

Periodikum

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN

Svazek

123

Číslo

1

Stát

Japonsko

Strany od

62

Strany do

67

Strany počet

6

BibTex

@article{BUT117253,
  author="Radomír {Sokolář} and Lucie {Keršnerová}",
  title="Sintering of feldspar rocks from czech quarries",
  journal="JOURNAL OF THE CERAMIC SOCIETY OF JAPAN",
  year="2015",
  volume="123",
  number="1",
  pages="62--67",
  issn="1882-0743"
}