Detail publikačního výsledku

On the cutting performance of coated HSS taps when machining of austenitic steel

SLIWKOVÁ, P.; PÍŠKA, M.

Originální název

On the cutting performance of coated HSS taps when machining of austenitic steel

Anglický název

On the cutting performance of coated HSS taps when machining of austenitic steel

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

The paper deals with a quality of the PVD coated HSS taps when cutting the stainless austenitic chromium-nickel non-stabilized steel DIN 1.4301 (X5CrNi 18-10). The main attention is focused on the analysis of loading (cutting moment, specific energy) of the HSS taps by means of pieso-electrical dynamometer Kistler 9272 and the relation between the quality of duplex PVD coatings and their effects on the quality of machined thread surfaces and tool life of the taps.

Anglický abstrakt

The paper deals with a quality of the PVD coated HSS taps when cutting the stainless austenitic chromium-nickel non-stabilized steel DIN 1.4301 (X5CrNi 18-10). The main attention is focused on the analysis of loading (cutting moment, specific energy) of the HSS taps by means of pieso-electrical dynamometer Kistler 9272 and the relation between the quality of duplex PVD coatings and their effects on the quality of machined thread surfaces and tool life of the taps.

Klíčová slova

cutting tap; cutting performance; cutting moment; quality; roughness

Klíčová slova v angličtině

cutting tap; cutting performance; cutting moment; quality; roughness

Autoři

SLIWKOVÁ, P.; PÍŠKA, M.

Vydáno

03.09.2014

Nakladatel

VŠB - TU Ostrava

Místo

Ostrava

ISBN

978-80-248-3518-1

Kniha

Mezinárodní konference výrobních technologií při příležitosti 50. výročí založení Katedry obrábění a montáže Fakulty strojní VŠB-TU Ostrava

Edice

1

Strany od

26

Strany do

34

Strany počet

8

BibTex

@inproceedings{BUT109280,
  author="Petra {Sliwková} and Miroslav {Píška}",
  title="On the cutting performance of coated HSS taps when machining of austenitic steel",
  booktitle="Mezinárodní konference výrobních technologií při příležitosti 50. výročí založení Katedry obrábění a montáže Fakulty strojní VŠB-TU Ostrava",
  year="2014",
  series="1",
  number="1",
  pages="26--34",
  publisher="VŠB - TU Ostrava",
  address="Ostrava",
  isbn="978-80-248-3518-1"
}