Detail publikačního výsledku

Limestone sludge in the brick body

SOKOLÁŘ, R.; VODOVÁ, L.; ŠVEDA, M.

Originální název

Limestone sludge in the brick body

Anglický název

Limestone sludge in the brick body

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

Influence of limestone sludge (generated during the washing process of limestone crushed aggregates) with high content of CaO in the form of calcite on the properties of brick body made from non-calcareous sludge (from the washing process of quartz sand) as a basic plastic brick clay was determined. Presence of calcite very distinctly influenced the firing process and properties of fired body. Limestone sludge decreases firing shrinkage, bulk density and coefficient of thermal conductivity of the brick body after the firing in the range of 850 – 950 deg. C. Higher modulus of rupture and water absorption is typical for fired bodies with limestone sludge addition. Most of these improvement are caused by the formation of anorthite only in the bodies based on the limestone sludge.

Anglický abstrakt

Influence of limestone sludge (generated during the washing process of limestone crushed aggregates) with high content of CaO in the form of calcite on the properties of brick body made from non-calcareous sludge (from the washing process of quartz sand) as a basic plastic brick clay was determined. Presence of calcite very distinctly influenced the firing process and properties of fired body. Limestone sludge decreases firing shrinkage, bulk density and coefficient of thermal conductivity of the brick body after the firing in the range of 850 – 950 deg. C. Higher modulus of rupture and water absorption is typical for fired bodies with limestone sludge addition. Most of these improvement are caused by the formation of anorthite only in the bodies based on the limestone sludge.

Klíčová slova

Limestone sludge, Anorthite, Porosity, Strength

Klíčová slova v angličtině

Limestone sludge, Anorthite, Porosity, Strength

Autoři

SOKOLÁŘ, R.; VODOVÁ, L.; ŠVEDA, M.

Rok RIV

2017

Vydáno

01.08.2014

Nakladatel

Trans Tech Publications

Místo

Zurrich, Switzerland

ISBN

978-3-03835-188-7

Kniha

Advanced Materials Research

Edice

1

ISSN

1662-8985

Periodikum

Advanced Materials Research (online)

Svazek

1000

Číslo

3

Stát

Švýcarská konfederace

Strany od

158

Strany do

161

Strany počet

4

BibTex

@inproceedings{BUT108862,
  author="Radomír {Sokolář} and Lucie {Keršnerová} and Mikuláš {Šveda}",
  title="Limestone sludge in the brick body",
  booktitle="Advanced Materials Research",
  year="2014",
  series="1",
  journal="Advanced Materials Research
 (online)",
  volume="1000",
  number="3",
  pages="158--161",
  publisher="Trans Tech Publications",
  address="Zurrich, Switzerland",
  doi="10.4028/www.scientific.net/AMR.1000.158",
  isbn="978-3-03835-188-7",
  issn="1662-8985"
}