Detail publikačního výsledku

Influence of moisture and temperature of calcium silicate bricks on results of measurements with rebound hammer

BROŽOVSKÝ, J.

Originální název

Influence of moisture and temperature of calcium silicate bricks on results of measurements with rebound hammer

Anglický název

Influence of moisture and temperature of calcium silicate bricks on results of measurements with rebound hammer

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

Testing with rebound hammers is influenced by various factors, like composition and components of tested material, treatment of tested surface, moisture content of tested material, temperature of material and environment. Influence of these factors on mea-surement results during testing concrete is described in technical literature and standards. Calcium silicate body can be characterized as non-cement based fine grained concrete, however, with considerably higher water absorbing capacity compared to standard concrete: ca 12-14% (fine aggregate bonded by hydration products of lime). To use rebound hammers for testing calcium silicate bricks, influence of selected factors on measurement results was tested. It was proved, that content of moisture and temperature of calcium si-licate brick has influence on results of measurements with rebound hammer, and therefore it is necessary to take into account these influences.

Anglický abstrakt

Testing with rebound hammers is influenced by various factors, like composition and components of tested material, treatment of tested surface, moisture content of tested material, temperature of material and environment. Influence of these factors on mea-surement results during testing concrete is described in technical literature and standards. Calcium silicate body can be characterized as non-cement based fine grained concrete, however, with considerably higher water absorbing capacity compared to standard concrete: ca 12-14% (fine aggregate bonded by hydration products of lime). To use rebound hammers for testing calcium silicate bricks, influence of selected factors on measurement results was tested. It was proved, that content of moisture and temperature of calcium si-licate brick has influence on results of measurements with rebound hammer, and therefore it is necessary to take into account these influences.

Klíčová slova

calcium silicate brick, NDT, rebound hammer, temperature, moisture

Klíčová slova v angličtině

calcium silicate brick, NDT, rebound hammer, temperature, moisture

Autoři

BROŽOVSKÝ, J.

Vydáno

01.07.2014

Nakladatel

Trans Tech Publications

Místo

Švýcarsko

ISBN

978-3-03835-188-7

Kniha

Ecology and New Building Materials and Products

Edice

1

ISSN

1022-6680

Periodikum

Advanced Materials Research

Svazek

2014

Číslo

1000

Stát

Švýcarská konfederace

Strany od

352

Strany do

355

Strany počet

4

BibTex

@inproceedings{BUT108757,
  author="Jiří {Brožovský}",
  title="Influence of moisture and temperature of calcium silicate bricks on results of measurements with rebound hammer",
  booktitle="Ecology and New Building Materials and Products",
  year="2014",
  series="1",
  journal="Advanced Materials Research",
  volume="2014",
  number="1000",
  pages="352--355",
  publisher="Trans Tech Publications",
  address="Švýcarsko",
  isbn="978-3-03835-188-7",
  issn="1022-6680"
}