Detail publikačního výsledku

Influence of the workbench on the capture efficiency of pollutants of the Aaberg exhaust hood

PECH, O.; PAVELEK, M.

Originální název

Influence of the workbench on the capture efficiency of pollutants of the Aaberg exhaust hood

Anglický název

Influence of the workbench on the capture efficiency of pollutants of the Aaberg exhaust hood

Druh

Článek recenzovaný mimo WoS a Scopus

Originální abstrakt

This paper focuses on investigations of capture efficiency of pollutants with the use of the reinforced slot exhaust system (REEXS), which is known as the Aaberg exhaust hood. It is a traditional slot exhaust hood equipped with an air supply jet that intensifies exhausting along the axis of the exhaust hood. By an adjustment of the air supply quantity, the reinforced exhaust hood can operate in traditional or reinforced modes. Two main cases were investigated – the first was with a free space in front of the slot exhaust hood, the second case was with the workbench at the level of the lower edge of the exhaust opening. Influences of the workbench were investigated for the same air velocity in the exhaust opening and with different momentum flux ratios of supplied and exhausted air flows. In both the cases the capture efficiency was measured by the tracer gas method. The carbon dioxide was used for that purpose. From measurements of the capture efficiency it was concluded that the use of the workbench has a positive influence on the capture efficiency area.

Anglický abstrakt

This paper focuses on investigations of capture efficiency of pollutants with the use of the reinforced slot exhaust system (REEXS), which is known as the Aaberg exhaust hood. It is a traditional slot exhaust hood equipped with an air supply jet that intensifies exhausting along the axis of the exhaust hood. By an adjustment of the air supply quantity, the reinforced exhaust hood can operate in traditional or reinforced modes. Two main cases were investigated – the first was with a free space in front of the slot exhaust hood, the second case was with the workbench at the level of the lower edge of the exhaust opening. Influences of the workbench were investigated for the same air velocity in the exhaust opening and with different momentum flux ratios of supplied and exhausted air flows. In both the cases the capture efficiency was measured by the tracer gas method. The carbon dioxide was used for that purpose. From measurements of the capture efficiency it was concluded that the use of the workbench has a positive influence on the capture efficiency area.

Klíčová slova

Pollutants, reinforced slot exhaust system (REEXS), air supply quantity

Klíčová slova v angličtině

Pollutants, reinforced slot exhaust system (REEXS), air supply quantity

Autoři

PECH, O.; PAVELEK, M.

Vydáno

01.05.2014

Nakladatel

University Politehnica Timisoara - Faculty of Engineering Hunedoara

Místo

Hunedoara, Romania

ISSN

1584-2665

Periodikum

Scientific supplement of ANNALS of FACULTY ENGINEERING HUNEDOARA – INTERNATIONAL JOURNAL of ENGINEERING

Svazek

12

Číslo

2

Stát

Rumunsko

Strany od

189

Strany do

192

Strany počet

4

URL

http://annals.fih.upt.ro/pdf-full/2014/ANNALS-2014-2-29.pdf

BibTex

@article{BUT107705,
  author="Ondřej {Pech} and Milan {Pavelek}",
  title="Influence of the workbench on the capture efficiency of pollutants of the Aaberg exhaust hood",
  journal="Scientific supplement of
ANNALS of FACULTY ENGINEERING HUNEDOARA
– INTERNATIONAL JOURNAL of ENGINEERING",
  year="2014",
  volume="12",
  number="2",
  pages="189--192",
  issn="1584-2665",
  url="http://annals.fih.upt.ro/pdf-full/2014/ANNALS-2014-2-29.pdf"
}