Detail publikačního výsledku

Processing of operational data during continuous casting of steel after change to the cooling nozzles

ŠTĚTINA, J.; KAVIČKA, F.; MASARIK, M.

Originální název

Processing of operational data during continuous casting of steel after change to the cooling nozzles

Anglický název

Processing of operational data during continuous casting of steel after change to the cooling nozzles

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

The surface temperature on the small radius surface in positions of straightening is an important parameter that can influence the surface quality of continuously cast steel slabs. Based on the detailed analysis the replacement of cooling nozzles pertaining to the small radius surface in the secondary cooling was performed on the caster in Evraz Vitkovice Steel due to the requirement on the increase of surface temperatures on the small radius surface of cast slabs. The results and experiences obtained after the replacement of cooling nozzles are compared to long-time operational data for the preceding setup of cooling nozzles that are used on the caster since 1995. The comparison is performed with the use of data acquired from the dynamic solidification model and with the use of the statistical operational data. The optimization of cooling nozzles setup is also discussed in the paper.

Anglický abstrakt

The surface temperature on the small radius surface in positions of straightening is an important parameter that can influence the surface quality of continuously cast steel slabs. Based on the detailed analysis the replacement of cooling nozzles pertaining to the small radius surface in the secondary cooling was performed on the caster in Evraz Vitkovice Steel due to the requirement on the increase of surface temperatures on the small radius surface of cast slabs. The results and experiences obtained after the replacement of cooling nozzles are compared to long-time operational data for the preceding setup of cooling nozzles that are used on the caster since 1995. The comparison is performed with the use of data acquired from the dynamic solidification model and with the use of the statistical operational data. The optimization of cooling nozzles setup is also discussed in the paper.

Klíčová slova

GPGPU computing, CUDA, heat transfer with phase changes, continuous steel casting

Klíčová slova v angličtině

GPGPU computing, CUDA, heat transfer with phase changes, continuous steel casting

Autoři

ŠTĚTINA, J.; KAVIČKA, F.; MASARIK, M.

Rok RIV

2014

Vydáno

25.06.2013

Nakladatel

Žilinská univerzita v Žilině

Místo

Žilina

ISBN

978-80-554-0715-9

Kniha

Sborník příspěvků konference 32. stretinutie katedier mechaniky tekutín a termomechaniky

Edice

první

Strany od

271

Strany do

274

Strany počet

4

Plný text v Digitální knihovně

http://hdl.handle.net/

BibTex

@inproceedings{BUT100336,
  author="Josef {Štětina} and František {Kavička} and Miloš {Masarik}",
  title="Processing of operational data during continuous casting of steel after change to the cooling nozzles",
  booktitle="Sborník příspěvků konference 32. stretinutie katedier mechaniky tekutín a termomechaniky",
  year="2013",
  series="první",
  number="1",
  pages="271--274",
  publisher="Žilinská univerzita v Žilině",
  address="Žilina",
  isbn="978-80-554-0715-9"
}