Detail publikačního výsledku

Stress state analysis of sub-sized pre-cracked three-point-bend specimen

STRATIL, L.; KOZÁK, V.; HADRABA, H.; DLOUHÝ, I.

Originální název

Stress state analysis of sub-sized pre-cracked three-point-bend specimen

Anglický název

Stress state analysis of sub-sized pre-cracked three-point-bend specimen

Druh

Článek recenzovaný mimo WoS a Scopus

Originální abstrakt

The contribution deals with finite element analysis of stress state in sub-sized pre-cracked three-point bend specimen (KLST). A studied material was Eurofer97 steel. The true stress-true strain curve was obtained from tensile test. The three-point-bend tests were carried out on pre-cracked plain and side-grooved specimens at ambient temperature. Performed tests were simulated using FEA software ABAQUS 6.10. The stress state in KLST specimen was compared with the stress state of pre-cracked Charpy and 1T SENB. The analysis confirmed the stress state in KLST specimens at the crack-tip does not correspond to the stress state of standard fracture toughness determination because of loss of crack-tip and out-of-plane constraint.

Anglický abstrakt

The contribution deals with finite element analysis of stress state in sub-sized pre-cracked three-point bend specimen (KLST). A studied material was Eurofer97 steel. The true stress-true strain curve was obtained from tensile test. The three-point-bend tests were carried out on pre-cracked plain and side-grooved specimens at ambient temperature. Performed tests were simulated using FEA software ABAQUS 6.10. The stress state in KLST specimen was compared with the stress state of pre-cracked Charpy and 1T SENB. The analysis confirmed the stress state in KLST specimens at the crack-tip does not correspond to the stress state of standard fracture toughness determination because of loss of crack-tip and out-of-plane constraint.

Klíčová slova

KLST, three-point bending, side grooving, Eurofer97, J-integral

Klíčová slova v angličtině

KLST, three-point bending, side grooving, Eurofer97, J-integral

Autoři

STRATIL, L.; KOZÁK, V.; HADRABA, H.; DLOUHÝ, I.

Rok RIV

2013

Vydáno

30.09.2012

Nakladatel

Association for Engineering Mechanics

Místo

Brno

ISSN

1802-1484

Periodikum

Engineering Mechanics

Svazek

2012(19)

Číslo

2/3

Stát

Česká republika

Strany od

121

Strany do

129

Strany počet

9

BibTex

@article{BUT98412,
  author="Luděk {Stratil} and Vladislav {Kozák} and Hynek {Hadraba} and Ivo {Dlouhý}",
  title="Stress state analysis of sub-sized pre-cracked three-point-bend specimen",
  journal="Engineering Mechanics",
  year="2012",
  volume="2012(19)",
  number="2/3",
  pages="121--129",
  issn="1802-1484"
}