Detail publikačního výsledku

INVESTIGATION OF THE INFLUENCE OF ALTICRN COATING FOR DRY MILLING OF CONSTRUCTION STEEL 1.8159

JAROŠ, A.; FIALA, Z.; DVOŘÁČEK, J.

Originální název

INVESTIGATION OF THE INFLUENCE OF ALTICRN COATING FOR DRY MILLING OF CONSTRUCTION STEEL 1.8159

Anglický název

INVESTIGATION OF THE INFLUENCE OF ALTICRN COATING FOR DRY MILLING OF CONSTRUCTION STEEL 1.8159

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

This study deals with the benefits of very hard PVD coatings applied to the tools of high speed steels. The coating was synthesized by a cathodic-arc deposition process (CAE). The milling was carried out without using process liquid, so it was dry machining. During testing, cutting speed was varied (30; 35 and 40 m/min), but the feed per tooth (0.05 mm) and depth of cut (2 mm) were constant. The cutting tests were performed on vertical milling machine FV 25 CNC. The aim of this experiment was to compare the coated and uncoated HSSE-PM end mills and find out the benefits of coating AlTiCrN. The monitored parameters were force loading and flank wear. Best results were achieved by machining cutting speed 35m/min. Tools with PVD coating AlTiCrN had ten times longer durability than uncoated tools.

Anglický abstrakt

This study deals with the benefits of very hard PVD coatings applied to the tools of high speed steels. The coating was synthesized by a cathodic-arc deposition process (CAE). The milling was carried out without using process liquid, so it was dry machining. During testing, cutting speed was varied (30; 35 and 40 m/min), but the feed per tooth (0.05 mm) and depth of cut (2 mm) were constant. The cutting tests were performed on vertical milling machine FV 25 CNC. The aim of this experiment was to compare the coated and uncoated HSSE-PM end mills and find out the benefits of coating AlTiCrN. The monitored parameters were force loading and flank wear. Best results were achieved by machining cutting speed 35m/min. Tools with PVD coating AlTiCrN had ten times longer durability than uncoated tools.

Klíčová slova

force loading, flank wear, high-speed steel, PVD coatings, face milling

Klíčová slova v angličtině

force loading, flank wear, high-speed steel, PVD coatings, face milling

Autoři

JAROŠ, A.; FIALA, Z.; DVOŘÁČEK, J.

Rok RIV

2013

Vydáno

17.12.2012

Nakladatel

MAGNANIMITAS

Místo

Hradec Králové

ISBN

978-80-905243-3-0

Kniha

Sborník příspěvků Mezinárodní Masarykovy konference pro doktorandy a mladé vědecké pracovníky 2012

Edice

1

Strany od

3475

Strany do

3482

Strany počet

7

BibTex

@inproceedings{BUT96579,
  author="Aleš {Jaroš} and Zdeněk {Fiala} and Jan {Dvořáček}",
  title="INVESTIGATION OF THE INFLUENCE OF ALTICRN COATING FOR DRY MILLING OF CONSTRUCTION STEEL 1.8159",
  booktitle="Sborník příspěvků Mezinárodní Masarykovy konference pro doktorandy a mladé vědecké pracovníky 2012",
  year="2012",
  series="1",
  number="3",
  pages="3475--3482",
  publisher="MAGNANIMITAS",
  address="Hradec Králové",
  isbn="978-80-905243-3-0"
}