Detail publikačního výsledku

Fatigue Properties of AlSi9Cu3 Cast Alloy under Different Heat Treatment Condition

TILLOVÁ, E.; CHALUPOVÁ, M.; PODRÁBSKÝ, T.

Originální název

Fatigue Properties of AlSi9Cu3 Cast Alloy under Different Heat Treatment Condition

Anglický název

Fatigue Properties of AlSi9Cu3 Cast Alloy under Different Heat Treatment Condition

Druh

Článek recenzovaný mimo WoS a Scopus

Originální abstrakt

It was found that, by sand casting of AlSi9Cu3 alloy is documented big amount of cast defects as pores, voids and microshrinkages. The existence of casting defects has considerable influence on fatigue behaviour and served as nucleation places of fatigue damage. Apart from cast defects the morphology and the size of eutectic silicon and of secondary phases are important factors aspect the fatigue properties of Al-Si cast components. The solution treatment temperature 525 C and holding time 4 hours caused the change of Si-morphology and reduction iron rich phases.

Anglický abstrakt

It was found that, by sand casting of AlSi9Cu3 alloy is documented big amount of cast defects as pores, voids and microshrinkages. The existence of casting defects has considerable influence on fatigue behaviour and served as nucleation places of fatigue damage. Apart from cast defects the morphology and the size of eutectic silicon and of secondary phases are important factors aspect the fatigue properties of Al-Si cast components. The solution treatment temperature 525 C and holding time 4 hours caused the change of Si-morphology and reduction iron rich phases.

Klíčová slova

Al-Si cast alloys; Solution treatment; Fe-rich intermetallic phases; Fatigue strength

Klíčová slova v angličtině

Al-Si cast alloys; Solution treatment; Fe-rich intermetallic phases; Fatigue strength

Autoři

TILLOVÁ, E.; CHALUPOVÁ, M.; PODRÁBSKÝ, T.

Rok RIV

2010

Vydáno

20.11.2008

Nakladatel

EDIS Zilina

Místo

Zilina

ISSN

1335-0803

Periodikum

Materiálové inžinierstvo

Svazek

15

Číslo

4/2008

Stát

Slovenská republika

Strany od

11

Strany do

17

Strany počet

7

BibTex

@article{BUT47403,
  author="Eva {Tillová} and Mária {Chalupová} and Tomáš {Podrábský}",
  title="Fatigue Properties of AlSi9Cu3 Cast Alloy under Different Heat Treatment Condition",
  journal="Materiálové inžinierstvo",
  year="2008",
  volume="15",
  number="4/2008",
  pages="11--17",
  issn="1335-0803"
}