Detail publikačního výsledku

The influence of Thin Boundary Films on Real Surface Roughness in Thin Film, Mixed EHD Contact

KŘUPKA, I.; HARTL, M.

Originální název

The influence of Thin Boundary Films on Real Surface Roughness in Thin Film, Mixed EHD Contact

Anglický název

The influence of Thin Boundary Films on Real Surface Roughness in Thin Film, Mixed EHD Contact

Druh

Článek recenzovaný mimo WoS a Scopus

Originální abstrakt

The behaviour of thin viscous boundary films in the rough surface rolling-sliding point contact operated under thin film lubrication conditions have been observed by thin film colorimetric interferometry. Changes in film thickness distribution within the lubricated contact between steel ball and glass disc were studies with both mineral base oil and mineral oil formulated with non-functionalized polyalkylmethacrylate (PAMA). Recent studies by other researchers showed that this polymer containing viscosity index improver exhibits some friction-reducing capabilities even though it forms only very thin boundary films on rubbing surfaces. Results obtained in the current study proved that thin viscous boundary films formed on rubbing surfaces can reduce asperities interactions of rubbing surfaces under very thin film conditions. Even though these boundary films do not separate rubbing surfaces completely they still can provide some protection of contacting bodies against excessive friction and wear.

Anglický abstrakt

The behaviour of thin viscous boundary films in the rough surface rolling-sliding point contact operated under thin film lubrication conditions have been observed by thin film colorimetric interferometry. Changes in film thickness distribution within the lubricated contact between steel ball and glass disc were studies with both mineral base oil and mineral oil formulated with non-functionalized polyalkylmethacrylate (PAMA). Recent studies by other researchers showed that this polymer containing viscosity index improver exhibits some friction-reducing capabilities even though it forms only very thin boundary films on rubbing surfaces. Results obtained in the current study proved that thin viscous boundary films formed on rubbing surfaces can reduce asperities interactions of rubbing surfaces under very thin film conditions. Even though these boundary films do not separate rubbing surfaces completely they still can provide some protection of contacting bodies against excessive friction and wear.

Klíčová slova

Mixed lubrication; Boundary films; Thickness; Polyalkylmethacrylate

Klíčová slova v angličtině

Mixed lubrication; Boundary films; Thickness; Polyalkylmethacrylate

Autoři

KŘUPKA, I.; HARTL, M.

Rok RIV

2010

Vydáno

01.10.2007

Nakladatel

Elsevier

Místo

Velká Británie

ISSN

0301-679X

Periodikum

Tribology International

Svazek

40

Číslo

11

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1553

Strany do

1560

Strany počet

8

BibTex

@article{BUT43777,
  author="Ivan {Křupka} and Martin {Hartl}",
  title="The influence of Thin Boundary Films on Real Surface Roughness in Thin Film, Mixed EHD Contact",
  journal="Tribology International",
  year="2007",
  volume="40",
  number="11",
  pages="1553--1560",
  issn="0301-679X"
}