Detail publikačního výsledku

Effect of gassing and solidification rate on structure, porosity and mechanical properties of AlSi9Cu3 alloy castings

ROUČKA, J.; VEVERKA, A.; DIVIŠ, V.; ŇUKSA, P.

Originální název

Effect of gassing and solidification rate on structure, porosity and mechanical properties of AlSi9Cu3 alloy castings

Anglický název

Effect of gassing and solidification rate on structure, porosity and mechanical properties of AlSi9Cu3 alloy castings

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

Test specimens of AlSi9Cu3 alloy cast in sand and metalic moulds were used to assess the extent of porosity in dependence on the gas content in the melt and on the solidification rate. On the basis of the dendrite arm spacing (DAS) the size of primary phases was evaluated and the mechanical properties of test pieces were measured. It has been proved that higher solidification rates contributes to greatly reduced porosity, smaller size of individual gas pores, finer structure, and higher strength and ductility of the alloy. The shape of pores is influenced by gas content significantly.

Anglický abstrakt

Test specimens of AlSi9Cu3 alloy cast in sand and metalic moulds were used to assess the extent of porosity in dependence on the gas content in the melt and on the solidification rate. On the basis of the dendrite arm spacing (DAS) the size of primary phases was evaluated and the mechanical properties of test pieces were measured. It has been proved that higher solidification rates contributes to greatly reduced porosity, smaller size of individual gas pores, finer structure, and higher strength and ductility of the alloy. The shape of pores is influenced by gas content significantly.

Klíčová slova

Porosity, cooling rate, dendrite arm spacing, mechanical properties

Klíčová slova v angličtině

Porosity, cooling rate, dendrite arm spacing, mechanical properties

Autoři

ROUČKA, J.; VEVERKA, A.; DIVIŠ, V.; ŇUKSA, P.

Vydáno

10.10.2007

Nakladatel

Trasactions of the Universities of Košice

Místo

Košice

Kniha

Aluminium 2007

Strany od

90

Strany do

96

Strany počet

7

BibTex

@inproceedings{BUT23256,
  author="Jaromír {Roučka} and Aleš {Veverka} and Vladimír {Diviš} and Petr {Ňuksa}",
  title="Effect of gassing and solidification rate on structure, porosity and mechanical properties of AlSi9Cu3 alloy castings",
  booktitle="Aluminium 2007",
  year="2007",
  pages="90--96",
  publisher="Trasactions of the Universities of Košice",
  address="Košice"
}