Detail publikačního výsledku

Comparative study of vulcanization characteristics between centrifugally spun ZnO fibers and commercial ZnO nanoparticles in natural rubber

NASERI JODA, N.; BREZINA, D.; CADEK, D.; ŘÍHOVÁ, M.; MACÁK, J.

Originální název

Comparative study of vulcanization characteristics between centrifugally spun ZnO fibers and commercial ZnO nanoparticles in natural rubber

Anglický název

Comparative study of vulcanization characteristics between centrifugally spun ZnO fibers and commercial ZnO nanoparticles in natural rubber

Druh

Článek WoS

Originální abstrakt

In response to environmental concerns associated with the overuse of zinc oxide (ZnO) in rubber vulcanization, this study investigates the potential of novel ZnO fibers synthesized via centrifugal spinning as alternative vulcanization activators in natural rubber. Developing more efficient ZnO morphologies capable of maintaining vulcanization performance at reduced ZnO loadings has become an important research objective. At first, Composite fibers were prepared using zinc nitrate and polyvinylpyrrolidone by centrifugal spinning from the corresponding solution. These fibers were then annealed at 500 degrees C to yield pure ZnO fibers and subsequently milled to achieve homogeneity. The vulcanization behaviour of natural rubber compounds formulated with these ZnO fibers (composite, annealed, and milled) was compared to that of commercial ZnO powders (Silox 2C and Zinkoxid RAC). Characterization included analysis of the morphology and structure of fibers and particles, measurement of vulcanization kinetics (t95), activation energy, crosslink density, and mechanical properties, such as tensile strength, elongation at break, tear resistance, and hardness. Results showed that annealed and milled ZnO fibers exhibited comparable or, in some tests, better performance than commercial ZnO powders, with enhanced crosslink density and mechanical strength. The findings indicate that ZnO with tailored fiber morphology may enable reduced ZnO loading without compromising performance, representing a promising approach toward reducing the environmental impact of rubber vulcanization.

Anglický abstrakt

In response to environmental concerns associated with the overuse of zinc oxide (ZnO) in rubber vulcanization, this study investigates the potential of novel ZnO fibers synthesized via centrifugal spinning as alternative vulcanization activators in natural rubber. Developing more efficient ZnO morphologies capable of maintaining vulcanization performance at reduced ZnO loadings has become an important research objective. At first, Composite fibers were prepared using zinc nitrate and polyvinylpyrrolidone by centrifugal spinning from the corresponding solution. These fibers were then annealed at 500 degrees C to yield pure ZnO fibers and subsequently milled to achieve homogeneity. The vulcanization behaviour of natural rubber compounds formulated with these ZnO fibers (composite, annealed, and milled) was compared to that of commercial ZnO powders (Silox 2C and Zinkoxid RAC). Characterization included analysis of the morphology and structure of fibers and particles, measurement of vulcanization kinetics (t95), activation energy, crosslink density, and mechanical properties, such as tensile strength, elongation at break, tear resistance, and hardness. Results showed that annealed and milled ZnO fibers exhibited comparable or, in some tests, better performance than commercial ZnO powders, with enhanced crosslink density and mechanical strength. The findings indicate that ZnO with tailored fiber morphology may enable reduced ZnO loading without compromising performance, representing a promising approach toward reducing the environmental impact of rubber vulcanization.

Klíčová slova

ZnO, Fibers, Centrifugal spinning, Nanoparticles, Vulcanization, Natural rubber

Klíčová slova v angličtině

ZnO, Fibers, Centrifugal spinning, Nanoparticles, Vulcanization, Natural rubber

Autoři

NASERI JODA, N.; BREZINA, D.; CADEK, D.; ŘÍHOVÁ, M.; MACÁK, J.

Vydáno

01.10.2026

Nakladatel

Elsevier

Periodikum

POLYMER TESTING

Svazek

163

Číslo

October

Stát

Spojené království Velké Británie a Severního Irska

Strany od

109361

Strany počet

11

URL

BibTex

@article{BUT212973,
  author="Nasrollah {Naseri Joda} and  {} and  {} and Martina {Říhová} and Jan {Macák}",
  title="Comparative study of vulcanization characteristics between centrifugally spun ZnO fibers and commercial ZnO nanoparticles in natural rubber",
  journal="POLYMER TESTING",
  year="2026",
  volume="163",
  number="October",
  pages="11",
  doi="10.1016/j.polymertesting.2026.109361",
  issn="0142-9418",
  url="https://www.sciencedirect.com/science/article/pii/S0142941826002783?pes=vor&utm_source=clarivate&getft_integrator=clarivate"
}